Satellite L300 - clean install Win 7 SP1 64 bit

Similar Questions

• Satellite C650 - after installing Win 7 SP1, computer does not start

  Hello

  When I tried to launch the Win 7 Service pack 1 update, it 'impossible' and now I can't start my computer, even in safe mode. When I turn it on, no matter what I do (including let it run or by pressing F8) results in the message:

  "For Atheros PCIE Ethernet Controller v2.0.1.0 (15/12/09)
  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE - ROM
  No boot device - insert boot disk and press any key ".

  i.e., I can't go to the start menu.

  The only thing I can access is the utility Boot screen by pressing F12. Experience with Service packs, I'm trying to access the system restore to undo the update, but I can't get there.

  Win 7 came preinstalled on my computer and my computer was working fine before I tried to install SP1, so all the solutions / advice would be much appreciated!

  Thank you

  Hello

  When you see this message PXE for some reason laptop cannot detect the HARD drive and use it as a boot device.
  Enter please the BIOS settings and check if the HARD drive is listed correctly there. By default the BIOS settings and try to restart your laptop.

  Please post comments.

  BTW: you created the recovery DVDs?

• Ethernet problem W700 after hibernation after installing Win 7 SP1

  I installed Win 7 SP1 yesterday and now my W7 Enternet connections fail after awakening from hibernation. I have the most/all powersaving options got turned off/disabled.

  The W700 is in a Docking Station.

  Any thoughts?

  TNX,

  J

  I turned on my wireless connection and noticed two updates going on automatically I also noticed the icon "new hardware installation" in the system tray, but is closed before I could tell exactly what material. In any case, everything now works OK again.

  J

• 70073712 error code when you try to install Win 7 SP1

  I am using Windows 7 32 bit on a machine with 4 GB of RAM 540 i3.

  I get error code 70073712 when trying to install Win 7 SP1 via windows update.

  I disabled all startup programs and services not microsoft.

  I ran the fix - it utility and update v10 system utility preparation x 86.

  I have still some errors on the log to check ON that I can't fix, I don't know if they help or not.  Log is shown below:

  =================================

  Preparation of control system was updated.

  Binary version 6.1.7601.21645

  Package Version 11.0

  2011-02-25 22:18

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifestx86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifestx86_microsoft-windows-smbserver-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifestx86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifestx86_microsoft-windows-smbserver-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3

  (f) CSI Manifest and S256H Do Not Match0x00000000 winsxs\Manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifestx86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifestx86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifestx86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968

  (f) CSI Manifest Failed Catalog Check0x00000000 winsxs\Manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifestx86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6

  Summary:

  Seconds executed: 58

  Found 9 errors

  County of apparent CSI and S256H Do not Match Total: 2

  Manifest CSI has not catalog check the total count: 7

  Unavailable repair files:

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.16664_none_03c12997716b5264.manifest

  winsxs\manifests\x86_a3a447e7a026fd8b08eef9015c3fd303_b77a5c561934e089_6.1.7600.20717_none_3c3b72980dd0607e.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-v1_31bf3856ad364e35_6.1.7600.16664_none_d9e264be57b7d382.manifest

  winsxs\manifests\x86_9edaf6d3bef8e3b8a511c965c4676cc0_b77a5c561934e089_6.1.7600.20717_none_fba4726a5de9641a.manifest

  winsxs\manifests\x86_microsoft-Windows-SMBSERVER-common_31bf3856ad364e35_6.1.7600.20789_none_043a27fc8a94a8c3.manifest

  winsxs\manifests\x86_e8bf52ce827220c20c57727d1ef1b0f3_b03f5f7f11d50a3a_6.1.7600.20717_none_c2175e5f4430b21d.manifest

  winsxs\manifests\x86_5f9114f1cdba6b133e611c33f9d42896_b77a5c561934e089_6.1.7600.16597_none_a1c1ac15f6bb52cb.manifest

  winsxs\manifests\x86_0f7a1a89936e7d82f675294dce25e472_b77a5c561934e089_6.1.7600.16597_none_b566a48eb4b33968.manifest

  winsxs\manifests\x86_0d9aca2e69a54e84f2113f11119a3945_b03f5f7f11d50a3a_6.1.7600.16597_none_7ca86e604e0c3fd6.manifest

  Customer experience report downloaded successfully.  Thank you for your participation.  For more information, see the Microsoft Customer Experience Improvement Program on the Microsoft web site.

  Can anyone offer any help on solving this problem and get installed SP1, as I'm stuck now!

  Thank you

  Thomas

  
  

  Hello Thomas_Si,

  Thank you for your message.  Please, try the following steps:

  Since you have already downloaded and run the system update tool, you can move on to step 2.

  1. According to your architecture of Windows 7, download / install and run the tool update system - CheckSur you can download the tool from the links below depending on your system type.

  Download the tool update system (64-bit)

  Download (32-bit) system update readiness tool

  2. click Start type cmd (you should see the command prompt fill up) right click and select run as administrator

  Inside the command prompt, type sfc/scannow

  For more information regarding the file system checker.

  * If corruption is found, see How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  3. once the SFC is finished, check your hard drive for errors.

  4 restart the system update readiness tool. If errors have been eliminated, try to reinstall Service Pack 1. If this is not the case, go to step 5.

  5. perform a Startup Repair, when starting, try to install the Service Pack.

  Please let us know the details of each scan or utility. We can't wait to hear back on your part.

  See you soon

• Clean install Win XP

  Location:
  I have a Sony VGC - 830G provided with Windows XP3 OEM preinstalled. (IOW about 6 years). I have 2 hard drives (150 GB each) set up in RAID 0 with four other partition D (media), E (images created by Paragon), F (games), G (various programs). There is a hidden partition somewhere containing system restore stuff. I have the cd of Win XP with integrated SP3 I want to clean install instead of use the restore cd that I created when I bought the pc.

  Issues related to the:
  1. If I clean install Win XP, this will affect only the drive when I installed it in C?
  2. I still can access other partitions if I reinstall partition magic and paragon drive backup programs?
  3 will be I could reuse the restore cd original return to the bloated OEM system that came with the pc?

  Sincerely, I appreciate all the comments and help that you could provide.

  1 Yes

  2 NO.

  3. Yes

• Intel Centrino Advanced - N 6205 WLAN causing blue screen (BSOD) on Elitebook 8570w Win 7 SP1 64 bit

  Hello world

  In recent months, I use a 8570w Elitebook.

  I can't tell you when the problem started, but as soon as I unplug the notebook from the power supply and WLAN is enabled, I get a blue screen after a while. Sometimes, but not this oftehn, I encounter this problem even when the laptop is connected to the power and WLAN is enabled.

  I could not determine when exactly this blue screen, but it's certainly the WLAN (Bluetooth is disabled in the BIOS for the moment). It happens most of the time when I'm under two or more virtual machines with VMWare Workstation (version 9.0.2).

  The WIFI card is an Intel Centrino Advanced - N 6205. I tried several drivers (mid-2012 at the latest in April 2013) with a complete uninstall of the previous drivers. Without success. Operating system is Win 7 SP1 64 bit.

  Google helped me a bit and I found an Intel forum where people are describing almost the same problem with these Intel WLAN modules.

  Checked the Knowledge Base of HP and I am just find more messages do not deal with the new modules.

  Should I consider replacing the WLAN (guarantee) card? Someone knows the same issue and was able to find a solution/workaround?

  All opinions are appreciated.

  Thank you
  Jerry

  Hello world

  Finally, I have launched the Intel WLAN module and replaced by a Broadcom module (HP spare part number: 669832-001, Broadcom model: BCM943228HM4L) with the driver version: 6.30.223.228 (05.02.2014).

  This solved my problem of blue screen. Intel (same as last) drivers do not work with the configuration I have on my Elitebook 8570w and I gave up to find an another software/driver associated solution. In recent weeks, I can run multiple virtual machines in VMWare (9.0.4) without problems.

  Hope this information is of help to anyone who is struggeling with the Intel Centrino Advanced-N 6205 WLAN module.

  Cheers, Jerry

• Failure of KB974431 update with 8007000D on a clean install of Win7 Pro 64-bit

  Hi all

  I just finished a clean install of Win7 pro 64 bit and everything looks on with the activated product key.  I'm applying 50 some important updated via update, but I have one that fails each time, KB974431.

  According to this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/27737d55-9c10-44b5-b701-6ba147c78364, another person having this problem had luck manually download and install the update.  But it did not work for me (I created a new thread because his son was in the installation forum).

  KB94431 was also causing problems for people who concoct a C004F050 error as in this thread:http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/ff57f326-0f1d-412c-a4d0-14de1eaf0836/ although I didn't have this error, I tried running sfc/SCANNOW and he did report that he "finds corrupted files but could not solve some of them."  I don't really know what I should look for in the CBS.  By suggestion of the thread, I installed 64-bit Windows Update Agent and Windows Update is represented nothing doesn't.

  I think I have a corrupted file update is already downloaded that Windows is trying to use each time and it fails.   They seem to live in files Windows\SoftwareDistribution\Download and Windows\Servicing\Packages.  Although I can change the permissions to delete the file in Windows\SoftwareDistribution\Download (and I've tried it without change of failure), access is denied whenever I try to touch the Windows\Servicing\Packages or its content.

  The only installed software were the latest EVGA nforce and drivers for video card, Norton Security Suite and the SoundBlaster last for my sound card driver.

  Any suggestions?

  2010-10-23 16:09:43, info CBS Impossible to extract all files of the firm ? ------C:\Windows\SoftwareDistribution\Download \00236e2e422dab929dcda56260d05350\Windows6.1-KB974431-x64.cab [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, CBS News could not extract all files in \\?\C:\Windows\SoftwareDistribution\Download\00236e2e422dab929dcda56260d05350\Windows6.1-KB974431-x64.cab cupboard [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, info CBS failed to add package: Package_for_KB974431 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.5 [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, CBS News could not prepare start packages [HRESULT = 0x8007000d - ERROR_INVALID_DATA]
  2010-10-23 16:09:43, error CBS could not process the single-phase execution. [HRESULT = 0X8007000D - ERROR_INVALID_DATA]

  OK, start at the stop of the snap-snap-in services.msc WindowsUpdate service and rename the folder C: \Windows\SoftwareDistribution\ to C:\Windows\SoftwareDistribution_old\ restart the service. Now look again for updates. You are now able to install.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• Can I install Win 7 Home 64 bit on Win 7 Pro 32 bit

  Current running Win 7 Pro 32 bit, need to upgrade to 64 - bit and can not really afford to pay the Tagus almost $300 price for Win 7 Pro 64.  What I peux/how to install Win 7 Home 64 bit on my machine?  Do not really need the Win 7 pro feature.

  You must perform a 'custom' / pure install the 64-bit version because there is no "Upgrade" path

  This means that you must back up all your important data (Documents, music, photos, video, Etc.) to external media. In addition, you will have to reinstall your applications once installed the 64 bit version of Windows, so round up all the media application you and product keys before you start.

  Also create an image backup of your version of 32-bit as a fallback option just in case there are questions.

  Then, download the device drivers 64-bit on the web support site you PC from the manufacturer and burn them on a CD.

  Now you are ready to start the 64-bit installation.

  No need to buy the home Premuim

  If you have a business retail or OEM of Windows 7 Pro version, you can download the. ISO file listed below, create a bootable DVD using Image Burn and then install the 64-bit version of Pro using your existing 32-bit product key located on the bottom of your laptop or on the side of the cover of a desktop PC to activate Windows by phone if necessary.

  =================================================

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• How to install win. 8 64 bits on my IBM Thinkpad T40 32-bit

  How to install win. 8 64-bit ISO on my IBM T 40 Thinkpad 32 bit dvd

  Moved from the installation of XP, set at level and activate Forum.

  To learn more:

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_8-windows_install/how-to-migrate-from-32-bit-versions-of-Windows-to/46a5b8f6-5fd3-4C67-9482-4573087480fb

• Satellite L300 - cannot install Microsoft updates after replacing HARD drive

  I am repairing a Satellite L300, which had a dead HARD drive. I replaced death 160 GB of HDD with a 500 GB WD, then used the recovery disks to install Windows Vista SP1 at the exit of the State of the box.

  Now, Windows update does not work, won't install autonomous not of Vista SP2 I downloaded, MS Security Essentials moved there also.
  Then I borrowed a 160 GB of work and went through the same process and everything works fine.

  To make it work with a 160 GB HARD drive, but not a 500 GB HARD drive. Why?

  > ... Standalone Vista SP2 I downloaded will not be installed
  Usually after installing recovery image, you have just to connect laptop to internet and after a short period of time, you will get messages about available Windows updates. Just install the offered updates process automatic Waterer and install important updates only.

  Let the system to install all the updates and don t force the installation of some own downloaded stuff.
  Last month I've updated HARD drive (320 GB I think) and installed Win7 on friends L300 and I didn't noticed any problem here.

• Satellite L300 - after installing XP it does not find the WiFi router

  After insatlling XP SP1 and insatlling a lot of everything except drivers WLAN works. I installed the drivers and I install Atheros to manage my connections, but it seems not yet to find the wifi router.

  I use toshiba satellite l300 pslbce.
  PS! I had the laptop that works on Ubuntu berfore, worked well.

  Hello

  Have you updated XP SP2 or SP3? I m wondering that you only use the SP1 and you need to update. SP2 or later is required for some pilot applications and software.

  And where did you downloaded the Atheros driver? You must use the driver from the Web from Toshiba site. The portal of WLAN, you can find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Re: Satellite L300-254 - need Win XP driver for WLan and FN keys

  I have laptop satellite L300-254 pslbge and have problems with drivers. This computer was emty (no recovery disk or drivers) then I bought it.

  I installed Win XP SP 2 disabling AHCI. Instaled the common Modules, Chip Set Utility, and when I try to install the drivers of controls (for the Fn keys). It is said that I did not install common Modules.

  Tried to install the WiFi drivers (realtek, but I do not know if the wlan hardware is realtek), but it is not recognized in Device Manager, (? ethernet controller), Lan works well.

  So please help me with wlan and the Fn keys problems

  Hey Buddy!

  I m using a Satellite L300 too with XP and I t notice any problem. It works correctly and the Web from Toshiba site displays all the drivers and tools for this.

  However, firstly everything that you should make sure that you have installed all the drivers for your laptop. The site Web of Toshiba shows only Realtek driver for WIFI then I guess you have Realtek WLAN card. You can run setup.exe to install drivers or if you get an error message?
  If you are not sure, you can also check what WLAN card you have on this site:
  http://www.PCIDatabase.com/
  The vendor and device ID, you can see in-online WLAN card properties Device Manager.

  Toshiba tools for FN keys, I can only say that you must install applications first Toshiba and then all the other common Modules. Common modules are required for all Toshiba applications works. Then remove the tools installed Toshiba and use this installation order that I used successfully on my Satellite L300:
  Toshiba Common modules
  TOSHIBA Hotkey utility
  Toshiba Touchpad POWER utility
  Toshiba Utilities
  Toshiba controls
  TOSHIBA Power Saver (not necessary, but very nice tool).

  I hope I could help a bit.

  Good bye

• Satellite L300 - need to Win Vista product key

  I have a Satellite L300. OS recently broke down and recovery CD does not work.
  I got another CD of instalation windows vista but windows at the back of the laptop dispelled the label, and I can't read the code.

  I can provide the invoice product or information of the laptop required for security reasons.

  How can I return the product key?

  Thank you

  Product key placed in the lower corner of your laptop is useless for you. Why?
  This product key is for the original version of recovery that you have with your machine and cannot be used for activation if you install Windows by using the original Microsoft facilities.

• Satellite L300 - cannot install Bluetooth mouse

  I am trying to install a mouse N554 bluetooth on my laptop satellite L300 model, having problems someone help?

  Hello

  What about by Satellite L300 you exactly or let's you have built in Bluetooth module?

  I have too many Satellite L300 and there s not equipped with Bluetooth so I guess you don t have a Bluetooth module.
  Check this box!

  Good bye