Satellite L300, default gateway down on WAN IP Configuration settings

Similar Questions

• Some clients get assigned to WRT300N, while others do not have a default gateway

  Two existing working posts, existing wireless phone and other wireless cable connects to the internet very well.

  Try adding cell phones work, they aquire signal wireless, gets the assigned DHCP IP address but can't connect. Looked at the output of ipconfig and shows no gateway by default - IP of the router is 192.168.1.1 - with everything by default, I did a reset on it.

  The existing machines have all default gateway assigned. Only difference I see is working machines are XP pro. Never had a problem with laptops work connect anywhere else.

  Any ideas on how to install in order to work laptops can connect?

  namralk wrote:

  Ethernet VMware Network adapter adapt VMnet8:

  The connection-specific DNS suffix. :

  ... Description: VMware Virtual Ethernet adapt for VMnet8

  Physical address.... : 00-50-56-C0-00-08

  DHCP active...: No.

  ... The IP address: 192.168.1.1

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  You've configured vmware on your computer to use 192.168.1.1 on the adapter VMnet8. This means that the computer uses 192.168.1.1 itself on this card and obviously will not be resolved 192.168.1.1 as default on your wireless adapter gateway 192.168.1.1 is the computer itself.

  Correct your network configuration in vmware. After that a "ipconfig / renew *" or a reboot must get a new lease of work, including the default gateway. Make sure that vmware does not use the 192.168.1.0/255.255.255.0 subnet for network cards.

• How to get the 'default gateway' in Windows 7?

  I forgot my WiFi password and I need to change. So, how can I get the 'default gateway' address and enter the configuration of the router in Windows 7?

  I tried to connect my laptop to the modem and typed ipconfig in Command to get the "default gateway" address, but it is 0.0.0.0. If anyone can please hep me find. Thanks :)

  Hello

  You need to reset the router back to factory settings and set up your network wireless since the beginning.

  It has normally a button at the back of the router to reset.

  Instructions to set up your wireless network will be at the website of the manufacturer of the router.

  ______________________________________________________

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Qosmio X 305 comes down from the default gateway - unable to get internet

  We have a few laptops Qosmio X 305 to my place of work and of them at one time or another gout setting "default gateway".

  Making it impossible to get out of the internet.
  And even if you try and add the gateway by default in, the setting will not stick.

  We use dhcp in our environment, so there shouldn't be anything in conflict with this setting.

  Someone at - he heard of that happening?

  We use Vist 64 bit. I guess the problem is with the nvidia driver. Help, please

• Satellite L300 - keyboard replacement

  I am trying to fit a replacement for my laptop Satellite L300 and default keyboard!

  I watched a lot of tutorials online and read many articles online, but I can't work on how to adapt the ribbon cable properly. Does anyone have advice?

  Thank you

  Your problem is how to connect or disconnect the cable from the keyboard only?

  I mean that it is so simply. On the connector itself, you can see two brackets plastic on the left and the side rght. You must move it to the top and the keyboard cable cut.
  Click here

  When you want to plug the keyboard cable just to put the cable in the connector and down the two piece of plastic (holders).

• My Satellite L300-110 hangs after BIOS update

  My Satellite falls down after I updated the BIOS. The old version of my Satellite L300 - 110 (PSLB0E) BIOS was 1.40 and upgrade to 1.50.
  From there on, my system hangs over and over again.

  Any help please. I cannot install Office Enterprise 2007, cannot defragment all my readers.
  Is there an option to restore changes made to my BIOS?
  Help!

  The default settings in the BIOS load after the update?

  You can reinstall Windows with the Toshiba Recovery disk? First back up your data because the HARD drive will be formatted and then start the installation of recovery.

  A restoration to the previous version of the BIOS is not possible, because on the Toshiba site is only the most recent (1.50) BIOS. Only an ASP (authorized service provider) can do a restore.
  You can search for an ASP here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  I don't know Mr. but you did a backup of the old BIOS? Maybe you can Flash this back.

• Default gateway disappears after installing SP2.

  Hi people

  I just installed SP2, and now when I start/restart the computer, the default gateway is missing. When I check the properties of the connection, the IP address is correct, but the default gateway is blank - it does not 0.0.0.0, there is nothing at all.

  My computer (Vista Ultimate x 86) and a XP Pro PC are connected to a router. I have disabled the DHCP on the router and use a static IP address for each computer. The XP machine is rarely used. I also have a configuration of the VPN connection. When I first encountered this problem, I deleted the VPN connection in case the PC tried to use it to connect to the Internet. I later recreated once I realized what the problem was.

  Even if I can reset the bridge, I don't want to have to do this every time that I reboot.

  **************************************

  ipconfig on my Vista PC at startup:

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: OS
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Bluetooth PAN network adapter
  Physical address.... : 00-11-67-AA-AC-D3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Marvell Yukon 88E8056 PCI-E Gigabit Ether
  Net controller
  Physical address.... : 00-1E-8C-B7-D9-76
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::980c:2d5d:1cd3:4195% 10 (Preferred)
  IPv4 address: 192.168.1.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
     ... Default gateway. :
  DHCPv6 IOOKING...: 251666060
  DHCPv6 DUID customer...: 00-01-00-01-0F-F2-6D-55-00-1E-8C-B7-D9-76

  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {9E323F18-CB91-4524-B5E3-64A8C101B
  078}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 17:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5A583DB0-C514 - B 49, 6 - 9D1A - 2703884-6
  AFB}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  **************************************
  **************************************

  After resetting the gateway:

  Microsoft Windows [Version 6.0.6002]
  Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: OS
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Bluetooth PAN network adapter
  Physical address.... : 00-11-67-AA-AC-D3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Marvell Yukon 88E8056 PCI-E Gigabit Ether
  Net controller
  Physical address.... : 00-1E-8C-B7-D9-76
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::980c:2d5d:1cd3:4195% 10 (Preferred)
  IPv4 address: 192.168.1.100 (Preferred)
  ... Subnet mask: 255.255.255.0.
     ... Default gateway. : 192.168.1.254
  DHCPv6 IOOKING...: 251666060
  DHCPv6 DUID customer...: 00-01-00-01-0F-F2-6D-55-00-1E-8C-B7-D9-76

  DNS servers...: 192.168.1.254
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 6:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {9E323F18-CB91-4524-B5E3-64A8C101B
  078}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 7:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 17:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: isatap. {5A583DB0-C514 - B 49, 6 - 9D1A - 2703884-6
  AFB}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  **************************************

  Can someone tell me what is the cause, please? I would also appreciate it if someone can tell me how I can configure the default gateway by using a batch file executed with administrator privileges. That would save me having to dig through Control Panel etc etc every time my computer starts.

  Thank you!

  Hi RealBlood,
  Thank you for visiting the Microsoft Answers forum.
  To solve your problem follow these steps:

  Repair options for TCP/IP stack for use with Windows Vista.

  Start, Programs\Accessories and right click on command prompt, select "Run as Administrator" to open a command prompt.

  In the command prompt window that opens, type type the following commands:

  Restore the default install WINSOCK entries: netsh winsock reset catalog

  Reset the battery TCP/IP IPv4 default installation. netsh int ipv4 reset reset.log

  Reset the battery TCP/IP IPv6 default installation. netsh int ipv6 reset reset.log

  Reboot the computer.

  Reset the default router by pressing the reset for 15 seconds with power button.

  • Turn off everything, modem, router, computer.
  • Connect the modem to the WAN/Internet port on the router.
  • Connect the computer to one of the router's LAN/network ports.
  • Turn on the modem, wait for triggering connect light.
  • Turn on the router, wait two minutes.
  • Start the computer.

  When the computer is completely loaded, we will see that.

  Hold down the Windows key and press R, then type CMD to open a command prompt:

  In the command prompt window that opens, type type the following command:

  IPCONFIG/ALL

  Right click in the command window and choose select all, and then press enter.
  Paste the results in a message here.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite L300 - need to Win Vista product key

  I have a Satellite L300. OS recently broke down and recovery CD does not work.
  I got another CD of instalation windows vista but windows at the back of the laptop dispelled the label, and I can't read the code.

  I can provide the invoice product or information of the laptop required for security reasons.

  How can I return the product key?

  Thank you

  Product key placed in the lower corner of your laptop is useless for you. Why?
  This product key is for the original version of recovery that you have with your machine and cannot be used for activation if you install Windows by using the original Microsoft facilities.

• Satellite L300 - recovery wipes C drive then fails to rebuild

  My Satellite L300 has come back to Toshiba for repair under warranty and before you have the ability to burn recovery discs came with the BSOD. Removed the hard drive and placed in a SATA cradle and ran chkdsk which repaired insofar as (back in the laptop) I could at least go to the Recovery Console.

  I chose back to the Toshiba factory condition (or something similar - don't remember the exact wording). Fast C screen came up and everything seemed to go well until he came up with an error. He retried two times but the error / notice of default came twice. Tried to reboot in safe mode but not bootmgr. Again removed the drive and placed it in the SATA cradle and the C partition seems to have been deleted.

  No windows installation at all, is it possible to run recovery Toshiba (departure and now 0 does nothing)?

  A Windows Vista recovery disc anything or allow me to access Toshiba Recovery is impossible?

  Any ideas? Help, please!

  Hi mate,

  Wait a minute, please! What error message you get exactly and what you mean exactly with the SATA docking station?

  Laptops vary between countries, so what L300 you have exactly? This is important because the HARD drive recovery works different on computers cell phones or let's say there are different ways it starts.

  > With no windows installation at all, is possible to run recovery Toshiba (departure and now 0 does nothing)?
  Another question: how you want to start the HARD drive recovery process so now Windows is installed? ;)
  Right, that s is not possible!

  In your case, I would order a new recovery disk. You must contact the ASP in your country!

• Satellite L300-15V - how to restore BIOS & DMI?

  Hello!

  Please help restore the default settings of the BIOS and its content very.
  DMI is necessary to restore the data, and the value of SN, UUID and others, this utility is not found.
  Laptop: Toshiba Satellite L300-15V
  Model: PSLBCE-00L008RU

  Does not work:
  -The touchpad during installation of Windows XP (after installation and install the drivers everything works), used to work;
  -Adjust the volume using the wheel;
  -Some Fn keys.

  It would be ideal if someone sent the utility and / or a full dump of the BIOS (probably taken by the programmer).
  Thank you!
  Change the load through the service center to offer please don't be too cheap and unreasonable.

  Post edited by: ADMIN
  English language only.

  Hello

  I put t whether someone here will be able to help you with this, but who can help you with this if you n t even write what model of laptop you have.

  I guess you know that the BIOS is mobile specific and if you want to help volume you must put the exact model name and model number.

• No audio device installed Satellite L300-28R (PSLB8E-12T018GR)

  Hello

  My English isn't the best, unfortunately. Maybe someone can help me.

  The following problem:

  A Satellite L300 ran without problems until now with windows 7 (32 bit). I had then increased PC speakers of this came of trust with a USB flash drive that will serve as an audio interface for mailboxes. He has been infected by the first recognized by Win7, installed, and I could use Ihne. But then the sound card integrated (Realtek HD Audio) is disabled. Now, when I remove the USB audio interface I have no more sound. There is a lack of complete the "Realtek HD Audio" entry in the audio control.

  In the Device Manager is not an entry ' Audio, video and game controllers' also appear longer. The interesting thing about the HD audio driver, but he is always installed correctly. It is found but no entry for more video, audio, game controllers, and if I was in the toolbar the look of speakers just click on it a red cross when he get up "no audio output device installed."

  On this, I tried to uninstall the system USB audio drivers (no problem) has restarted. Not always the same sound problem.

  That's why I completely uninstalled all drivers audio and tried Windows 7 default drivers. The same problem. I uninstalled the audio drivers, this time I tried the drivers Toshiba, same problem.

  Fact is I can remove all the drivers, reinstall, which happens without problem and the error message, then it is same because "drivers have been installed, the machine can be used now" I click on what there is also my drine Realtek HD Audio. But then I opened the Soundsteurung he wrote me, "No audio device installed" it's almost as if the onboard sound has been disabled in the BIOS, but unfortunately there is no entry exists, since the BIOS is usually something to bend parameters.

  I have integrated sound card in my vemutung the BIOS from a USB audio interface is disabled, I would now like to 'hidden' bios unlock options and manually activate the sound again. Unfortunately, I do not know how do I unlock the BIOS.

  Is there anything else maybe ideas, suggestions or solutions? Have already the system is set up with new same problem, the drivers are installed, the device is detected and marked as ready, but not input in the audio control and no entry in the Manager of devices for "audio, video and game controllers".

  Once had a similar problem with my desktop where I could pass without any problem, but the onboard sound in the BIOS again, unfortunately, what with the Toshiba BIOS Lite is not the case.

  Hope someone can help me here, slowly I won't now, so that a new installation was not, I see the problem with the BIOS setting.

  Answers in German would be nice

  Greetings and thanks
  yunyx

  Hi mate

  To be honest I'm not quite sure what the problem might be m.
  Your ad is also a bit confusing.

  First of all, the BIOS is not similar to the BIOS that you can find on desktop PC and as far as I know there is no special option to enable or disable the sound card.

  So I think that in your case, it s BIOS not deliver.
  I think that its Windows operating system that makes some disorders who knows maybe the registry is confused up similar facts is that you should see some yellow exclamation points in device if Manager driver would be absent or you should see an unknown device in the devices list

  The latest Realtek audio driver could be downloaded directly from the Realtek page, but even if the Realtek audio driver is not installed Win7 standard driver should recognize the sound chip and sound must be detected during the operating system installation.

  I think you should try to install a driver from Realtek but if this won't help you, then you should try a new installation of the OS. Get it back you would help define the laptop back to factory settings and I think it's the fastest solution in your case

• Re: Satellite L300 - camera does not work after upgrade to Win7

  As in the subject. Camera does not work after the upgrade to Windows 7. I have tried almost everything found on the Internet. The drivers are installed.

  There is no exclamation point in the system.

  Satellite L300 (PSLB8E)

  Hello

  What happens when you start the webcam app?
  All programs-> Toshiba-> webcam

  Did you install other 3rd software part as for example the Skype that could access the webcam?

  Extra tip: go to BIOS and set it to default, save changes, and then restart the laptop.
  Start Skype for example, check the settings in Skype webcam chose correctly.

  It would be really interesting to know if the other software would be able to use the webcam.

  By the way: have you installed Toshiba face recognition? This software use and access the webcam as well
  Then sometimes it would be possible that this software could block the webcam and webcam tool could not work

• Satellite L300 - clean install Win 7 SP1 64 bit

  I just did a clean install of Windows 7 64-bit, replacing the normal 32-bit Vista that comes with the laptop.

  The facility has been good, but I have a few questions about the following:

  I adjusted the automatic run settings to ask every time for all selections. The problem is that when the game DVD in WMP or VLC disk reads but is noisy. It is very good for the s CD without excessive noise. The acoustic silencer on the download site is for 32-bit, but can be used in this laptop. In the original Vista there is no noise at all, so I wonder if there is other parameters that can sort this point, otherwise I'll have to keep changing things manually with the acoustic silencer.

  I noticed a very low noise coming from laptop (like a lighter version of a business when you're boarding Jet it). I ran a video memory Stress Test CE and he showed a few errors. If I reduce the brightness of the screen there is less noise so I wonder if it's something to do with the Panel of inverter of screen I'm sure that's not the HARD drive or the cooling fan, but it could be something on the motherboard.

  On the backup plan Acronis will slow down my system or are Win 7 OK backup options?

  Thanks a lot for all the possible solutions to these problems.

  A long time ago I've installed Win7 32 bit on friends Satellite L300. It worked perfectly. Much better than original Vista.
  > I still don't know what is the best test for the screen.
  I put t understand what kind of test do you mean. I hope that you have installed the right display driver and LCD works perfectly with a native resolution.

  Win7 recovery with Acronis image creation is, generally, the right decision. With this disc, you can install Win7 again and again very rapidly and you should not install every single driver separately.

  If you want to keep this laptop any longer I think it is worth to buy it. One last thing: you will buy it once and you can use it in the future too if you decide to buy the new laptop or PC.

• Satellite L300 - after the BIOS update I have a black screen

  Welcome! I have a big problem.

  I improve my Satellite L300 BIOS to the old version that I download on the official website of Toshiba. I turn on the update program and after about minute, the system will shoot down and on the screen I see black screen only. The light on the drive flashes green and the led in the DVD-ROM flashes orange. I have no idea what's going on.

  Please help me!

  Hello

  It sounds like this during the update of the BIOS, that something was going wrong. I think that the ROM module must be reflashed or in the worst cases, the motherboard should be replaced.

  In any case, you should contact an ASP for help. Technicians can try to reflash the ROM module and solve this problem.
  If you don't know where is the nearest ASP, you can search on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good bye

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.