Default gateway disappears after installing SP2.

Similar Questions

• Vista theme disappeared after installing SP2

  I updated vista 64 Service Pack 2 to allow the installation of ie9.  After installing sp2, my taskbar has been changed and the vista theme completely disappeared.  Areas of the screen are now much brighter, lighter or white (taskbar now is almost white and has the old style box 'Start').  I went in the 'appearance' of the control panel section and searched the vista theme - it's gone.  Installation of task bar that I had before the sp2 update is missing.  How can I get that back?  I tried to remove and reinstall sp2 and restore to earlier date and put it back - no matter what I do the screwed up theme with no option to get the old back.  Everything else works fine.  How to bring back the task of vista bar/color theme?  Is there a file I can load up?  I'm tired of wasting time of uninstallation/reinstallation.  We don't like also how change is so brilliant screen - and we do not find a way to change that either - there is no manual ocntrols and not to tarnish the brightness - no indication 'aid' does not provide - it says adjust buttons that do not exist.  How to bring back the vista theme?

  Hello

  I suggest you to follow the methods below and check if it helps:

  Method 1:

  Try following the steps in the article provided below and check if it helps:

  Troubleshoot monitor and video card

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

  Method 2:

  Also try running the Fixit from the link provided below:

  Visual effects Aero Glass in Windows are not working or displayed

  http://support.Microsoft.com/mats/aero_effects_not_working/en-us

  Method 3:

  I also suggest you update the graphics drivers on the manufacturer's Web site click the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Hope this helps,

• My address bar disappeared after installing antivirus software.

  lost address bar

  address bar disappeared after installing antivirus software

  address bar of Windows XP at the bottom of page.

  In what program? All I have at the bottom of any window is the bar of tasks and in some programs, the status bar.

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  Adobe reader has disappeared after installing the update or unable to re - install, already says "the application installed.

  The adobe reader program no longer exist in my C drive.

  I use windows 8 and tried reinstalling countless times, disable the anti-virus, restarted my computer, etc.. Have also tried uninstall adobe, but the program does not exist more...

  Please help because my exams are in 5 days and all my study material must be opened with pdf!

  Thanks in advance.

  Hi, Fabien,

  Is - this directory exists on your system? -C:\Program Files (x 86) \Adobe If Yes, do you think that Adobe Reader folder in there?

  Please use the tool on your system: http://labs.adobe.com/downloads/acrobatcleaner.html

  Reinstall Acrobat Reader DC on your system? Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Rahul Tyagi

• After installing SP2 NIC does not

  Hello

  Windows server 2003 with SP1 WIRELESS speed of 10 Mbps. After installing SP2 NIC does not.

  Ravi

  Hello and welcome to the community of VMware.

  You have installed VMware tools on this comments?

• After installing sp2 for my vista ultimate, I noticed in the lower right of my desktop "evaluation copy 6002.

  My problem now is my system continues to alert me that I have 0 hours left of my assessment and install a new version of windows just before the blue screen with a partial message blocking by referring to the same thing.  How can I fix without losing all my installed software and etc. ?

  Learn how to install Vista SP2
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Have you installed Vista SP2 via Windows Update or...?

  Previous, related discussions include:

  http://social.answers.Microsoft.com/forums/fi-fi/VistaInstall/thread/de1b11cb-2846-4bf7-B92A-520f3ecd33d5

  http://groups.Google.com/group/Microsoft.public.Windows.Vista.General/browse_frm/thread/2e95ead94ff4f5ab

  =================================

  Free unlimited installation and compatibility support is available for Windows Vista SP2 issues until August 30, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista will not install new updates after installing SP2

  Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

  I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

  I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

  Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

  Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

  You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

  Let me know if you still need help, and I will respond with what I've done.

• Satellite A500 - sounds/images of default system lost after installing Win7

  Hello

  I bought a Toshiba Satellite A500 with Windows Vista and upgrade to Windows 7. After my installation of Windows 7, I lost all my icons of Toshiba and sounds, as silent image appears so hitting the button mute on the keyboard and the beep on hitting the sound up/down button.

  Before installing, I took a backup of a file from Toshiba and tried to install apps from Toshiba in the TOSHIBA\TOSAPINS folder there. But still not get the default values of the system.

  Would be very grateful if someone could help me to restore those back.

  See you soon,.
  Vikram.

  Hello

  I assume you mean on the menu that appears with the FN keys

  Usually after installing Win 7, you must reinstall the VAP (value added package) and utility Support Flash Cards in order to get the keys FN working again.
  You can download the two page from Toshiba Europe tools.

  I m not very good if you get the same sound that was available under Vista as Win 7 takes care of the own system alerts/sounds.

  But after the installation of VAP and Flash Cards Support utility, you should see the images that appear with the FN keys.

• Portege R100: The screen goes black after installing SP2

  Hello
  Currently, I tried to install SP2 for my laptop (Windows XP pro) R100. The end of the installation procedure I restarted the system, as requested. The windows logo appeared, then the screen went black and the only thing I could see was the mouse cursor.

  After several reboots, the situation did not do better. I tried to go on safe mode, but I had the same (only this time the black backround was typical registration of safe mode on the sides). I will perform a system restore without having to install SP2, but the fact that I am on a DSL connection most of the time very important SP2 installation.

  I would appreciate any solution to this problem.
  Thanks for your time.

  Hello

  As far as I know sometimes a few utilities and drivers must be updated after installation of the service pack 2 Microsoft.
  On the Toshiba driver page I found a backgrounder update of Microsoft Windows XP SP2 that contains a few s information about the utilities that must be updated.

  However, additional I found a lot of new drivers for R100.
  I think you should also try to update the old drivers as driver utility and the graphics card chipset.
  Eventually, it helps.

• Slow to start after installing SP2

  Hello

  I had this problem after istalling SP2 on my Toshiba M30. I istalled SP2 a few times before and uninstalled it is for this reason. The starting time is now about 2.5 min istead of 30 sec prior to installation. I have installed SP2 on a clean computer (removed spyware, cleaned the registry, defragment and so forth), followed by steps. But still the same. I have the loading machine about 1 min before it comes to wallpaper, before SP2, just after the sound of welcome he went at bottom of screen, icons and the bar and I was done. Now, his home, then 30-40 sec, then background screen and nothing for 1-1.2 minutes and then I get icons, bar and machine becomes operational. No one of my demons have this problem. Please, if anyone knows what to do - let me know. Thank you!

  Post edited by: ruarmani

  Hello

  Remember that SP2 installs additional firewall and security settings. It s all this entails loads initially. It takes several times.

  You can check the background processes and apps which start to run.
  It can be check in the msconfig. Type the command msconfig in the run window and check the Startup tab.

  The starting procedure takes a little more time on my laptop because the antivirus application that loads initially.

• Satellite A500 TV tuner disappeared after installing Windows 7

  I bought my A500 in November 2009. It has a built-in TV tuner.

  It works perfectly on Windows Vista with very good reception on a rabbit ear antenna. I was encouraged to install Windows 7 and sent to the Toshiba drive. I loaded it and after an aborted effort, I managed.

  It works fine even if I don't see what the fuss was about. However when I plugged the antenna to go to TV via the media library... I received the message that the TV signal could not be configured as a TV tuner was not connected.

  I rebooted... nothing. I looked in the control panel... devices... nothing. I searched for devices not installed... nothing. It's as if someone has removed the tuner! (mice?) I tried to download a new driver... but this was useless because I got the same message "no tuner.

  Does anyone have an idea how to solve this problem because he had me beaten?

  Hi mate

  I think that you should first check if the BIOS is updated.
  If this isn't the case, so far.

  Then, assign the default BIOS.
  After that, restart the machine and check if the TV tuner is visible in Device Manager.

  As far as I know you can find a driver TV tuner for Win 7 64 bit, Vista 64-bit and Vista 32 bit on the European driver Toshiba page!
  If you use the Win 7 32 bit, then I recommend that you use 32 bit TV tuner driver v4.0.2007.1115 Vista

• Satellite L350-24U: Windows Vista crashes after installing SP2

  Hello

  I own a Satellite L350-24U laptop with Windows Vista 32. I bought in October and had to reinstal the OS twice now. Still, it crashes after installation of Service Pack 2. After you restart the system, a blue screen appears, giving the following information

  STOP: 0 X 00000024 (0 X 00190444, 0X86B9BAD0, 0XC0000102, 0X00000000)

  I had to reinstall Win Vista with HDD Recovery from Toshiba (press F8, then repair etc.) and everything worked properly again.
  THS time, it's more serious. Last night the system shut down whenever you use internet explore (after about 30 seconds). SP2 has not been installed, but there are so many problems, I decided to install SP2, because I hoped that the bugs I had with SP2 would be eliminated. When installing SP2, the system crashed again, and now I got the same bluescreenmessage new.

  I tried to reinstall Vista, but the Toshiba HDD program starts no more: it is said: the installed program is not working (or something similar) - please click on ok to close.

  I did not burn the cd of recovery yet, so I don't know what more can be done and online support is closed today.
  I'd really be very happy for any help
  Thank you

  Hello

  I searched a bit on the Microsoft Web site and on the blue screen, I created this article:
  http://msdn.Microsoft.com/en-GB/library/ms793935.aspx

  So I think that the reason for the BSOD is a corrupted file system or a defective HARD drive. You should check the drive using the Drive Fitness Test for example.

  I put t understand why you didn't burn the disc of recovery yet. Why you didn t read the manual at first?
  Now, you have only one option to get a new recovery disk: Please order a new Toshiba directly: https://backupmedia.toshiba.eu/landing.aspx

• sounds works does not after installing SP2

  Help, after that I installed SP2 in my laptop Windows Vista, my sound has stopped working. I checked my sound system and update of my audio devices, but they are all perfectly fine. I cheked articles related to SP2 problems online, but they were not useful. I can't even uninstall SP2 because it does not! Also, I even tried unistalling all the updates I've installed SP2 and restarted my laptop for 5 hours, but nothing has WORKED. Help, please.

  Go to your laptop manufacturers website and download the drivers on their part.   Next time find a VISTA forum and not the Windows Home Server Ant.

  --

• Error starting after installing sp2

  I am running Windows vista Home premium. After I installed sp2 and restarted my computer windows trys to configure updates get to 100% in step 3, and then restarts the computer and recurrence everywhere. I tried the Startup Repair running, System Restore and tried to start my computer in safe mode. Nothing works please help!

  Thank you

  You don't say how you were trying to enter the SM.

  Try the following helper methods:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner