Satellite L300 will not let me connect

Similar Questions

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• Creative cloud says "disconnected" but will not let me connect. Tried all solutions on the login page errors creative cloud 3.

  Creative cloud tells me I am disconnected and will not let me connect. I tried quiting and restarting the program. I tried to configure the automatic detection of the local network settings. I also tried to delete the opm.db. Still does not work.

  Hello

  You can refer to the Thread -: error "You have been disconnected" whenever I try to connect to the creative desktop application cloud

  Also try:- cloud creative connection errors

  Hope this helps!

• Satellite L300 will not Windows load when using AC adpater

  L300 I used for 2 1/2 years has now developed fault because it will run when it is connected to the power supply - it won't start Windows. Laptop will charge of battery and then as usual using the battery. Then when connect it powers down and no sector will not start Windows.

  It is fine if I want to use that 2 hours and then recharge the battery and restart then disconnected from the main supply - which I did not I can't keep charging every 2 hours.

  I have reloaded windows with all updates of nominal and have tried to use different power adapter - same question.

  I do not understand why the L300 charges & works by using the battery, but does not work when it is connected to the power supply?

  Has anyone else had a similar problem? or knows how to solve?
  Do I need a BIOS update? or is it a more serious problem that does not work the power regulator?

  > Laptop will charge of battery and then as usual using the battery

  Hmm its strange usually if the AC adapter is defective, then s battery should not charge it is difficult to believe that this matter would be linked to the faulty adapter. In my opinion it of mobo problem and the solution might be an expensive

• Satellite L300 will not start

  AY up!

  I have a rather old L300 series which I'll put up like a computer diagnostic car dedicated. It does not attempt to start up, at all. I changed the RAM (2 GB) and hard drive (XP system) both with new components. The original, Vista hard drive, is in rude health.

  When you turn it on, the fan works, but nothing on the screen or the LEDs, I did the obvious things, any other ideas?

  AY up!

  My Toshiba Satellite L300 series shot tools. I changed disk cards and hard memory, put new components in both cases. Thinking that maybe the BIOS battery, I put the machine in charge. Nothing.

  When I turn on, the led lights green power as does the charging light when it is connected, then the fan starts. It is not "beep" to indicate the beginning of the start, nor does the HDD LED light. The battery is old, but still has enough power for 30 minutes running. On battery? Similarly.

  I did the standard things here, any ideas as to what I can do? I'm talented mechnically but computers are a book closed for me.

  Help, please...

• Satellite L300 will not charge the battery

  I have a new battery and I tried my old battery and another charger but my Satellite L300 load will always be not.
  If I unplug it then plug the charger back in it appear to be responsible for about 20 seconds.

  Can someone help pleas

  Hello

  If you have tried different batteries and new AC adapter and the battery still wouldn't load, then I would say; This s hardware problem of the motherboard.
  I think that there is no much do the defective part needs to be replaced

  I think that the ASP must verify the material, you know
  It of the best way to get the issue resolved.

• Windows Home page will not let me connect you / administrator

  on the windows for users login. Kathy/administrator won't let me connect. I have to use other users. so I can't get my computer to work properly. He will accept my password.

  Hello

  1 is that other users are standard users?

  2 - is the administrator account accepts the password or not. ?

  You can refer to the suggestion contained in the link and check.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765

  You can also see the link provided to know more about lost or forgotten password.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126/en-us

   

  Provide us more information for you to help.

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• WRT54G loses connection and will not let me connect again

  WIFI at home was great for 2 years, then every sudden in the last 2 weeks I lose my signal on my laptop and iPhone. Then, I can not find the signal, or if the device detects the signal it wont let me connect. He hears no even except my wep key, I get a message saying that I can't connect to the network. Usually, if I unplug my router and the modem I can connect and wifi takes about 24 hours or so I lost. Any help?

  Since you have already updated the firmware on your router, you reset your router and re-configured all the settings on your router? If this isn't the case, then press in and hold the reset for 30 seconds button... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

  When you re - configure all your router settings, you must change some settings under part wireless router...

  Set the channel on your router 11-2, 462 GHz Wireless and that the broadcast of the SSID should be activate...

  Then click the sub-tab under Wireless 'Advance Wireless Settings' and change the tag to 75 interval... Change the Fragmentation threshold to 2304 change the RTS threshold to 2307... Click 'save settings '...

  Now let's see if you can locate your wireless network and try to connect...

• Messages will not let me connect my Apple ID

  Recently, I've restored my laptop to factory settings. When you try to set up the Messages, it wouldn't let me connect my Apple ID. I know he recognizes when I use the right credentials, because he tells me that my password is incorrect, when I enter the wrong password. When I enter the password, the ID and the password letters out gray (is no longer editable) for one second then back to black (you can type in the box again). I would really like to be able to text my cell phone, so please let me know what I can do about it.

  There are hundreds like you with the same question... all I can advise is, relax, go get a drink, there is no solution, the only solution is to wait for the apple engineers to fix it... I tried to solve this problem for 11 hours... ABSOLUTELY everything tried... nothing doesn't work, don't waste time lol

• Windows will not let me connect on Skype

  Hey guys,.

  I bought a new computer from Windows 8 nice a few months ago and also installed Skype.

  I had a Skype account for a long time and I have used many.

  Until a few weeks ago, I couldn't get into Skype anymore.

  If I click on Skype icon on my screen, it will open, but then immediately he asks for my password and asks me to connect with my microsoft account.

  But I just want to connect with my Skype account, because I am not fond of linking all your accounts to another, but also why there are different programs.

  So there is a button that says: log each application separately.

  But that does no good because I can not yet connect here with my Skype account.

  Can someone tell me how I can connect with my SKYPE account.

  I'm a little frustrated here and could use help

  Thank you

  Nike

  In order to be able to connect with your Skype account, you must first install the desktop version of Skype. This is the same version that will launch on all previous Windows systems (XP, Vista, 7).

  The currently most recent Skype 6.14.0.104 desktop version can be installed using the msi installer:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Satellite L300 will not charge upward

  Hi all

  I have a L300 ve won t open upward, I tried doing auto repair, but he gets to half way through and it freezes everything. I tried the re-boot s disk but I ve had no joy.
  Now I've taken to a computer repair shop who said that the hard drive is faulty.

  Think you guys is that correct?

  If you were not able to install the OS by using the original Toshiba Recovery DVD, it is possible that the HARD drive is faulty.
  Change the HARD drive is not complicated and you can do it alone.

  In the lower corner, you will see HDD cover. Remove and gently move HDD to the side, then you can remove it completely.
  Buy the same one, built in HARD drive caddy and put back into the laptop.
  Use the recovery again disk and install OS.

• will not let me connect

  Hello

  Have frustrating problem that the NASrn104 won't let me sign in using my user name and password.

  I keep having to do OS restart and sign in using the "admin/password" it allows me to connect

  I then goto setting new password, what do I do

  I closed then everything down, including the SIN

  Restart all and get the same problem of not having SIN accept the new password.

  RAIDar version 6

  and just downloaded the latest firmware NAS

  any help apreciated

  The best was to come

  to use admin as username and my password