Satellite L350 shows BSOD on startup

Similar Questions

• Satellite M70 shows BSOD on startup

  My M70 shows me a blue screen...

  "" "A problem has been detected and windows has shut down to prevent damage to your computer." "

  Make sure you have enough disk space. If a driver is identified in the stop message, disbale the driver or check with the manufacturer for driver updates. try changing video cards.

  Technical information:

  "" "" * STOP: 0X0000007E (0XC0000005, 0X8050FD91, 0XF78AA50C, 0XF78AA208) ".

  I tried to reboot in safe mode, but it is up to the blue screen. What are these error codes (assuming they are something) and how do I know what they are?

  I can't get back all the data and I can't cross this screen

  HELP ME PLEASE!

  Odette

  I don't know what these means of codes. You can find one using Google.
  Is it you cannot use the preinstalled operating system more and I'm afraid you have to install it again using original Toshiba Recovery disk or original facilities Microsoft disc.

  You have some important data stored on the HARD drive?
  Blue screen something to do with your latest activities, maybe a new installation of the software?

• Satellite L300-1AS - BSOD on startup

  + * I have a problem starting of my Satellite L300-1AS. I've used it since December 25, 2008 (got a Christmas gift - and it's already does not work) * +.

  + * Whenever I start up my system (with windows vista) it shows me the text below: * +.

  Windows has encountered a problem communicating with a device connected to your computer.

  The error can be caused by unplugging a removable storage device, such as a USB external drive when the appliance is used, or by faulty hardware such as a hard drive or the CD-ROM drive which is a failure. Make sure that all removable storage is properly connected, and then restart your computer.

  Status: 0xc00000e9

  Info: An unexpected i/o error has occurred.* +.

  + * There is no device connected to this computer laptop whatsoever.* +.

  + * I tried to start a Toshiba laptop recovery software and also to update my BIOS from usb; CD; and then finally through an Ethernet LAN cable fix on my other computer - but the laptop just keeps showing the same message and does not react to the cd CD-ROM or USB enclosure in USB key... * +.

  + * Could someone please advise me what can be done, if necessary, to solve this problem? * +

  Hello!

  You can start in safe mode?

  I tried a bit with Google and I founded out that the problem could be due to perhaps the HARD drive. In your case I would test with Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. Then you can test the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• Satellite L350-12N - beeps during startup

  Hello

  I bought this as a refurbished laptop, and I have a problem getting it to start. When turned on, it says welcome to Toshiba screen where you can press the function keys to access the configuration screens, then the screen goes black, makes a continuous beep sound and goes no further. It loads the operating system.

  I tried to restore the operating system to the hard drive as described in the manual, but still the same fault. Is this a known indicator of a hardware or software failure?

  Any help or advice would be appreciated!

  Hello

  To be honest, I still don t understand what you exactly. Do you use F8 at the beginning upward to enter advanced startup options or what?

  You have created recovery DVD such as recommended by the reminder of Toshiba? If so, you can try installing the OS using this recovery media.

  In any case, enter the BIOS at startup settings upward and set it to default settings. HARD drive is recognized correctly in the BIOS settings?

  At the end I have to say that it is not easy to say what the problem is here. If please check out what several things and let us know if the HARD drive is recognized correctly, or what will happen if you try to install the OS by using initial recovery media.

• Satellite L350 - BSOD during the recovery and missing "BOOTMGR"

  Hello
  I have a Satellite L350, Vista Home premium SP1, (had it for about 4months)

  Yesterday I received an error black screen on my laptop it says to reboot, so I did, then just, my laptop wouldn't stat more, I have no idea why?

  So I put in my computer come with recovery disks laptop just reinstall every thing as if I just got it out of the box and I followed the instructions that the Recovery Wizard disk Toshiba says, and as his 'adaptation of the files', I get say Blue error screen "a problem has been detected and windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  And tell to reboot or what ever and just keep it.
  (Info tech: STOP: 0x000000D1 0x00000002, 0x00000000, 0x8D246FD7)
  (usbccgp.sys - address 8D246FD7 base at 8D23E000, Datestamp 47919053)

  Then I reboot my system and a black screen comes up saying "BOOTMGR missing".
  So now, I have nothing that works, I retried the disks but same error with blue screen.
  I also tried to make the atmosphere safe and decent here, nothing works.
  I m needs help!

  Thanks for reading, sorry for so much reading to do

  The reason why laptop doesn t start (error bootmgr) while the installation is stopped with a BSOD. If you need to reinstall the laptop again.

  It looks like a USB problem because I found this in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/945436/en-us

  If you have connected the external USB devices to the laptop, remove them.
  In the worst case, there is something wrong with the USB ports or controller and the motherboard must be exchanged.

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• Satellite L350 - Vista shows only 2 GB of RAM, but I have 4 GB installed

  I installed 2 two modules expansion memory of 2 GB each to my satellite L350 that works on Windows Vista Premium.
  I bought at Toshiba UK who confirmed that they were the correct modules.

  The System Control Panel icon always indicates RAM 2 GB (not 4GB) memory.
  If I remove one module 2 GB, the system icon of 2 GB (which is correct) said Control Panel.
  I have re-installed the two modules and changed their round in the slots, but the system icon still says 2 GB.

  Hello

  You have 32 bit or 64 bit Vista?
  First Vista 32-bit is not able to handle 4 GB of RAM. 32 bit OS have a limit, and they can only use about 3 GB of RAM.
  Here is some practical information: http://aps2.toshiba-tro.de/kb0/TSB82022E0000R01.htm

  You have installed Service Pack 1 for Vista?
  How much RAM does the BIOS?

  Welcome them

• Satellite L350 - How can I use my recovery disk?

  I have a Satellite L350 and you must return to the original settings. I created a recovery disc but don't know what to do from here.

  Before to start a restoration process, back up all important data. The, enter the Bios (F2 at startup) and the value of cd/ddvrom under the 1st boot device. Press f10 to save and exit. Insert the diskette and reboot the laptop. Then follow the instructions on the screen and that's it. Knowledge, during the recovery process that your computer restarts repeatedly :)

• Recovery disks does not not for the Satellite L350

  I have a Toshiba Satellite L350, I bought a few years ago

  Originally it was a laptop Vista Home premium and I opted for the Toshiba windows 7 upgrade and its been pretty much without problem.

  But recently something went a bit weird and things were not only works well (he would not always disconnect you and never seemed to stop correctly) and various other applications does not work properly.

  After a few uninstalls, reinstall, scans and patches from Microsoft has done nothing that I decided to take the plunge and use the recovery disc.

  I bought a Toshiba when I am the machine initially and had made one myself, before you upgrade windows 7 and a new after.
  I still have the windows 7 upgrade DVD so I can apply after if I had to start back on vista.

  The only other big change has had an upgrade of RAM 4 GB - I still the original of the RAM, if I need it, but before that there is no hardware problem not reported and chkdsk was also very good.
  So for me it was the o/s that was the problem.

  I tried now all recovery discs and they all have the same problem of reports that imagex cannot decompress the second frame of the file because it is corrupted to block 90 I n t have this real message at your fingertips
  but can be updated later.

  I can t see that I m something wrong, like everything I do is to put the dvd in the drive and reboot the laptop with the F12 key to boot from the recovery DVD and follow the screen controls on.
  You use reports from such that previously or I am doing something stupid?

  Thank you

  It's very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation that the HARD drive will be formatted, new partitions created, recovery image copied to the second partition of HARD drive and as the last step is the installation of recovery image.
  > I bought a Toshiba when I am the machine initially and had made one myself before the upgrade to windows 7...
  Have you tested the two of them in the past?

  In General, all you do is right. In my opinion, the problem may be recovery image itself or perhaps HDD has some defect in certain areas.
  If you can get the second HARD drive somewhere Exchange it, value default BIOS settings and test the installation of recovery again.

• Satellite L350-20F - recovery to some discs work point, still no start

  Hello

  Can anyone help please?

  I am the owner of a Satellite L350-20F running Vista
  After suffering a blow to the laptop it stopped working. (no surprise)
  Used recovery disks to restore unity, but nothing happening it restarts just for ants running with microsoft corporation, written slot, then check the disk begins to report any bad sectors, after that it fins it recharges execution of ants again.

  Make me blue screen error message every now and again, then go to windows recover screen to launch either startup reapir (made this much time still no progress) or start windows normally.
  Tried to fix it but just keep going through the steps to put the disc in and through the repair disk.

  Is it easy to change the HARD drive inside (I don't know how the PC but not computer idea mobile)(out of warranty))
  I also have a satellite L300 - 25H is poss of their network and to do a full format of broken one to see if that helps?
  Is the only thing that I'll be able to reformat the new HARD drive with recovery disks to restore on Vista or will I have to pay for a new OS?

  Thank you very much

  If

  Hello

  Maybe it s disc HARD issue you may try to check if the HARD drive is recognized and listed in the BIOS. In order to access the BIOS, you will need to press F2, immediately after the laptop has been turned on.

  By the way; here in the forum, you can find a category that offers useful movies how to replace a HARD drive:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=116

  Don t understand why you didn't check this in the past

• Satellite L350-17Z: Question recovery disc creation - problem with calibration

  I'm eager to get win xp instead of vista current on Satellite L350-17Z because some soft is not stable and vulnerabilities, while under xp on the desktop computer, I had no problem. XP compatibility mode is not solve this problem.

  So I decided to do it in a cruel manner as a laptop is new and almost empty, not to mention the habit of hard drive xp. Still I tried to make a recovery, using TOSHIBA Recovery Disc Creator.

  Buta * during DVD burning there is a fault and message about some problems with the calibration. I tried a few discs - same result.

  Hi Snen,

  It would be interesting to know what CD/DVD drive you have. Maybe you should try to update the firmware of the drive. For some readers of Toshiba and Pioneer, the site shows an update of the firmware. It s worth a try!
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  And what kind of DVD that you use to create a recovery disk? I have good experience with the types of DVD - R and I use Verbatim.

• Satellite L350 won't boot to the top

  Satellite L350 my daughter does not start. When you press the power button, the HARD drive light and there is no HD activity. Something that was noted is that the battery is fully charged a couple of days, but today when I tried to boot up the laptop, the battery led shows that it is unloaded. Does anyone know a remedy to fix the problem?

  Sorry, but I still don t understand what happening exactly when you try to start the laptop.
  Remove the battery and connect the laptop on AC power only. When you do this press power button to start the laptop.

  What exactly happens? You don't see anything on the screen?

• Re: Satellite L350-170 - Question about the parameters of the webcam and microphone

  Hello

  I would like to know the resolution of the webcam in my laptop because it shows preety bad out put. Also, where is the built-in microphone located? I would also like to know the screen brightness settings. How can I register my laptop? kindly help

  Since it is my computer opportunity, is a software that allows to detect the settings and confirm everything? My Product Details are as below.
  Return to the support home page
  Satellite L350-170 part number switch models: PSLD8E-00D008EN main features - processor Intel® Pentium® Dual-Core
  -Genuine Windows Vista® Edition Home Premium (pre-installed, Toshiba-HDD recovery)
  -DVD - RW SuperMulti drive (Double Layer)
  -2048 MB (1024 + 1024) DDR RAM (800 MHz)
  -17 "Widescreen TruBrite® XGA (1440 x 900) display high brightness

  Help, please.

  Hi CBX_tintin85,

  I think you should check this Toshiba document:
  [How to change the settings for the built-in webcam If the image is very dark or black | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

  In addition, the microphone is located on near the microphone because it s part of the webcam.

  About the quality of the image of the webcam you can also try reinstalling the driver of the webcam of the Web from Toshiba site.

• Satellite L350 - 20G powers down during start up

  My Satellite L350 - 20G begins to start and 10 seconds after stopping powers.

  He also refused to load.

  We exchanged the batteries completely charged with the same model and the same problem.

  Hello

  To me, it looks like a hardware problem
  Have you checked the adapter? The power is ON?

  Possibly a defective power adapter could be the reason why the battery can not be charged and why the laptop stops during the startup process

  Otherwise, it could be an electrical problem of power supply on the motherboard
  That's possible too

  How about starting with a single module of RAM?
  Check it a friend of mine to not boot the laptop because of the faulty RAM module

• Satellite L350 - not visible in the sound card device manager

  Satellite L350 model: PSLD8E
  OS: Vista 32 bit SP2

  Hello

  Cannot install the drivers for sound card and audio device is no longer visible or detected in the vista Device Manager. Tried Realtek drivers toshiba download and disk but still no sound or device after reboot.

  its my dads specifications and he says its just stopped working. When I checked initially, the audio device was reported as driver problem in Device Manager. Remove and try to update the driver, no audio device is no longer only show.

  is it possible that the audio device of the motherboard is loose or defective? Toshiba provides software diagnostic tools to check equipment?

  UPDATE:

  I looked through the windows event logs and discovered several error messages indicating that the PNP device to realtek sound was unexpectedly disconnected.
  don't know if this is due to problem hardware or driver updates.

  Thanks for any help,

  Hello

  Have you tried to update the audio driver of Toshiba page? If she's not always you help, backup all files needed and do a clean install of Windows. Otherwise, it takes more enough time to understand and resolve what the simple installation of Windows and users of the Toshiba forum for the right answer pending. Reinstall it and see if the problem still occurs. The dysfunction of the material is also possible.

  Welcome them