Satellite L450D - not appear networks

Similar Questions

• Satellite L450D not start - think usb device is connected

  Hello. I have a portable satellite L450D running Windows 7, which will not start. It gets to the loading of the windows with the windows logo page, but it will not go beyond this point.

  I tried repairing the system, and that tells me that a device is always connected to the laptop. I think it's maybe my phone, I had connected by usb last week. The usb cable is removed physically but the laptop obviously thinks that it is still connected.

  I'm passed through different service options - system repair, System Restore, restore the last good config, boot into safe mode but nothing seems to work.

  Ive tried to connect the phone while the laptop is trying to start and then disconnect it but still no luck. The laptop still think that the phone is connected.

  Ive not tridd remove the battery from the laptop, as it's apparently quite difficult.

  Any ideas anyone? Thanks in advance

  Hello

  I would recommend you check the boot order in the BIOS.
  Go to the BIOS by pressing F2 by turning on the device.
  Now, press F9 to get the default settings and save the changes press F10.
  Also check if you can disable the legacy USB if it s is not available, ignore this tip.
  Now, restart the laptop and test if it would boot from the HARD drive.

• Dv7 Pavilion not appearing network do not

  I have a HP Pavilion dv7-6163us laptop and the network does not appear in the network and sharing Center.  I tried to reinstall the drivers for the RealTek PCIe GBE Family controller nothing helps.  I have to update the driver for the Intel Centrino wireless-N 1000, so now the wireless light is blue instead of orange.  Any ideas? Is toast the network card?  I started upward from this morning and no network, same plugged (cannot recognize that there is even a network on the laptop).

  RealTek PCIe controller:

  VEN 10EC

  DEV 8168

  Also get a fatal error of HP connection manager:

  "A fatal error has occurred, check the HP connection manager in the event viewer for more details

  A socket operation encountered a dead network. "

  Thank you

  Jim

  Hello jrdobbs,

  Welcome to the HP Forums!

  I understand the computer cannot connect to wireless networks, and there is a socket error. I'll do my best to help you! First of all, please provide the information I ask for:

  1. the computer to connect to a network with an Ethernet cable?

  2. the operating system. If you need help to find this information, please visit this site in order to determine the Windows operating system.

  3. This involved on some programs or all programs?

  4. have you installed new software or drivers on this computer, before the problem appeared?

  In addition, if the question has recently arisen, I would make a system restore. I want that bring you the computer to the earliest possible restore point, in an attempt to Dodge everything that has the problem. Here is a document on how to perform a system restore: System Restore

  Thank you and have a great day!

  Mario

• Satellite L450D-11V - wireless issues

  Help, please!

  My Satellite L450D not find or connect to wireless networks. I tried to connect my laptop in various places where I know that wireless connections are available, but it keeps prompting me to use an ethernet cable.

  Any help or advice would be most appreciated as has happened for the last 6 months or more.

  If your laptop can not find any WLAN in your area, then you must check WLAN card.
  Open the Device Manager and check if the WLAN card is listed and installed properly.
  Wireless network card is enabled? Use the key combination FN + F8 to toggle WLAN card.

  Can you also tell us what OS you use and don't use original Toshiba preinstalled OS or your own installation?

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

  Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.
  I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  Can anyone help?

  Do you mean the LAN card?
  What status of LAN card appears in Device Manager?

• Adapter for L450-136 wireless satellite not appearing is not in the network adapter

  My laptop has been upgraded from Vista to Windows 7, and the wireless adapter does not appear in Device Manager. I don't know what type of card is or how to find out and any software or driver that I am trying to install can not find anything. I tried resetting the BIOS by default thing, but resulted in nothing.

  There is a "network controller" under "Other devices", but it has no driver and is once again an "unknown" device

  I am desperate to get my wifi working and would appreciate any help someone could give me.

  Thank you very much

  Mark

  Hello

  > There is a "network controller" under "Other devices", but it has no driver and is once again an "unknown" device
  Sounds like the missing WLAN card ;)
  What do you think?

  In your case, I'll try to install the latest WLAN driver. You can get it on the Toshiba European driver download page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Normally after a change of OS you want to install all the drivers, so I think that only the drivers is missing.
  Check this box!

• Satellite L450D does not start

  My satellite L450D won't start. He stopped and when I walk back, he back the start menu, if I select the repair, it's just a black screen. If I choose start as usual, it goes to the windows logo but it remains stuck. I also tried to start in safe mode, but it says loading files and stays stuck.

  I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
  Any ideas would be appreciated
  Thank you

  > I tried pressing 0 on start up and it does not work and I also tried the recovery disk and it does not work.
  If you have a laptop model European 0 initially upwards will help any. You must use F8 at startup to display the advanced startup options. Is the option repair my computer available?

  Anyway, OS is probably screwed and new installation OS can help. Enter the BIOS and set it to default settings. According to redo this cell phone start and press F12 to get into the boot menu. When the boot menu appears on the screen, place the recovery in the optical disc drive disk, choose the CD/DVD device from the menu and press ENTER. This will force ODD to start the reading recovery disk.

  Let us know if it works for you.

• Satellite L450D-128 - Wireless internet does not connect

  Hello

  I have a Toshiba Satellite L450D-128 and it won't let me connect to a wireless network and I can't find the switch wireless and ive tried FN + F8, but it does not work. Could you please help.

  Thank you Ryan

  Hello Ryan

  I don't know what version of Win7 do you use and what can be the problem of using WLAN but if you use original recovery image, everything should work properly.

  At first check please if the wireless network card is installed correctly. You can check in the Device Manager.
  If the wireless network adapter is installed correctly, it must be enabled. Usually, this can be done by using the FN + F8 key combination.
  >.. .and ive tried FN + F8, but it does not work
  What does not work exactly? You have problem with the FN keys in general or just using FN + F8?

  When you press the FN key you find cards flash at the top of the screen?

• Satellite L450D - 11G - does not start and do not know how to restore

  Hi guys,.

  I have a satellite l450d - 11g on windows 7 32 bit.
  When I start it, it comes up with a message saying that I need to restore due to a file named: /windows\system32\drivers/msisadrv.sys is missing or corrupt and to insert my disc.

  Well I don't have a disc or anything like that with my computer and ive tried everything.

  Can someone help me atall? I'll be willing to pay, just to get my laptop to the top and runninng again.
  Press f8 and '0' method did not work either.

  Thank you.

  > The f8 and '0' method did not work either.

  Usually, HARD drive recovery option should be available by pressing F8 at the beginning of the startup procedure.
  Then an Advanced Start menu should appear where you could choose fix my computer-> drive HARD recovery

  If this is not possible, then you will need to retrieve the laptop using the Toshiba recovery disc.
  The disk can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

  Good luck

• Satellite R630-14 days - WLAN turn FN + F8 option does not appear

  I just got my Satellite R630-14 days with OS Win7 in German so I reinstalled the OS is in English (Win7 Ultimate).
  I installed all the drivers supplied by Toshiba (Chipset utility, value added package, WLAN Broadcom Wireless Driver, etc.), although when I press FN + F8 combination only keys to toggle the Bluetooh is available.

  Turn WLAN switch option is not displayed.
  Because of this, I can not disable the WIFI network.
  Why the WLAN switch option does not appear even after installing all the drivers?

  Hello

  What it means that all the FN keys work correctly, but only the Fn + F8 for WLan is not OK?

  Hmm I think it has something to do with the WLan driver. If the WLan driver has not been installed properly, then you will not be able to activate this using FN + F8.

  Check-> network adapters Device Manager and check if the wireless network adapter is listed correctly!

• Re: Satellite A100 - after you have reinstalled the NIC is not appear

  Hi guys

  A friend reformatted my hard drive (100 satellite) and everything is good except the card network does not appear and it is preventing connect me to the internet.

  Do I have to download the drivers for this problem, if so which ones?
  Lost connectivity doctor, this is also downloadable. Is there anything else I need to do too?

  Thank you
  Dingo

  Hello!

  Yes, I think you should download the drivers for the network card. :)

  Search on the Toshiba site. You will find all necessary drivers:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite S50-B-12Z: battery life cycle Option does not appear in the eco utility

  Hello everyone.

  I am facing a strange problem. The eco utility allows to work ok with win 10 on my S50-B-12Z satellite and I used the eco charging battery I've run mainly my laptop plugged in.

  At some point, I need to do a system restore. I have re-installed the 10 victory and also the latest version of the eco utility downloaded from the Toshiba site. The problem is that when I open the utility eco, the choice of "battery life cycle", where you can select the eco reload or not, seems no more! So I find myself with the battery to 80% connected but does not support.

  I already tried to uninstall and reinstall the utility or install an earlier version of it.

  Is there something I could do in order the choice of "battery life cycle" to reappear or to cancel the State of charge of eco and leave my battery to charge again 100%?

  Thank you

  I have the same problem with my P50 - A satellite. Battery-life cycle does not appear in the new eco Win 10 utility installed. Version is: 3.0.0.0006. Older versions do not work, I tried also.

  More than 80% of maximum load, not 100% .

  I hope someone has a suggestion. To 80% battery life is too short

• Satellite C855 - 2 EV - some letters do not appear when I type fast and blind

  Hi all

  I bought this Satellite C855 - 2 EV only 2 days, but I've met a few keyboard problems.
  I type blind and fast all the time, so when I noticed that whenever I type fast, a few letters only do not appear on the screen once I pressed the keys.
  Especially the SPACEBAR.

  I can only type correctly if I do it slowly and if I have pressure on each unique key. I don't want to type like this because I want to save time and just type blind and fast, I also do not want to cause more damage to the keyboard or laptop.

  Can someone help me please?
  I don't want to consider the store just because of all the hassles I have to cross.

  Thanks in advance

  I know it may seem silly now, but I think that the only solution for you is to type a little more slowly and correctly. With correctly I mean that every single button should be enabled to give a correct contact.
  Similar thing happens on my older P500. When I type faster I make so many mistakes on my word document. Some letters are missing and occasionally does not work SPACEBAR. I tap it correctly. In my view, the key, but there is no contact.

  Sorry, but I don't think you can do something about it.

• Satellite L450D-13U - screen will not come

  I have a laptop Toshiba Satellite L450D-13U with 2 GB of RAM and no hard drive.
  My problem is that the display does not illuminate. I tried all the well known stuff and stuff like taking the battery, power down etc button but nothing seems to work.

  Can't even connect to an external monitor. Is there a part that I could change what can help this problem?

  Thank you very much

  Without any serious diagnosis, it is not easy to say what the problem is. Perhaps is faulty display.
  By the way: what happening exactly when you press button walk / stop?