Satellite L50-A-73 - impossible CD/DVD burning

Similar Questions

• By Satellite Pro S300 uses double layer DVD burner

  Hello

  Sorry for my bad question, but I have a DVD burner double layer on my Satellite Pro S300?
  THX

  Hello

  Do you have your read the user manual?
  In manual mode, you will find information on the CD/DVD drives properties;

  Always is that the Satellite Pro S300 series was equipped with different CD/DVD drives
  TEAC DV-W28S and Panasonic UJ870 are readers of DVD super multi and support media Double layer + r.

  You can also find more information on the CD/DVD drives that are installed by using the Nero Burning Rom. There is an option that shows you all types of CD and DVD that is compatible with the internal SIDE

• Update replacement Satellite L50 - B - 1 hm - SSD - DVD?

  Hello
  I want to change the unit of dvd with 2nd SATA Hard Drive HARD drive SSD Caddy for Toshiba Satellite L50-B-182 Re SU-208FB (found on ebay, $ 20).

  What is the best configuration?

  In the new tray dvd box, put / install 750GB hdd drive of my laptop
  Replace the 750 GB HDD with MX100 Crucial 256 GB SATA 6 Gbps internal SSD 2.5 "
  is it posible? These changes will have a big increase in the performance of my laptop?

  Thank you very much.
  Juan Carlos

  As I understood your message; you want to put the current HARD drive in the Bay ODD (optical disc), then a new SSD drive in the HARD drive Bay.
  Is this right?

  Well, first of all it s a good idea to replace the HARD drive with SSD drive. You will definitely get a boost huge performance. I did these updates in the past, and my laptop runs a lot faster.

  Now back to the question on the use of the HARD drive instead of driving ODD.
  I put t know if it will be possible since the laptop does not support the special feature of selection-Bay.
  In the past, some other laptops Toshiba Tecra and Portege series supported these updates but I'm not very well on laptops Satellite m.

  So in the worst case the HARD disk will not be recognized in the ODD Bay

• Satellite A135 - problem with the CD/DVD burner

  Hey guys,.
  A few days ago as nearly a week ago I had burned an audio CD for myself and it worked perfectly. Today when I tried to burn an image on my DVD, disaster. I use two software. IMGBURN & NERO. Unfortunately both failed me. What is happening is that the burning process starts normally, it shows that the buffering and burning taking place as well as caching of files. "Finally, it shows the burning process has been a success, but when it comes to verification, the drive appears saying: data verification failed - too many errors (Nero) and for IMGBURN it says ' they layouts do not match. When I reinsert the DVD, it shows that it is completely empty. Although both claim that the fire was successful. Later, I tried to burn a data dvd, still no luck, engraving, he shows successfully but verification fails and reinsert is empty.

  My laptop is: Satellite A135
  CD/DVDROM: TSST CORP TS-L632D ATA
  OS: Windows

  the default windows was vista when I bought it.

  Hello

  If you can't burn DVDs, then you should check first if it is a software problem based question or related equipment.

  I've been reading about the reader of CD/DVD burning questions and as many times the registry has been corrupted.
  Means that you was able to burn the DVD after you remove the upper and lower filters in the registry. Google for it and you'll find many pages.

  Is there a problem of CD/DVD drive, then you should find a good update on the page of European Toshiba driver in your laptop. If there is no update firmware, then it means that this firmware is ok and it s not necessary to date.

  Last but not Lea not all CD/DVD drive are compatible with all drives (CD and DVD).
  Why? Because the different CD and DVD manufacturers produce own using different standards. In this case, it may be possible that not all discs will be properly treated

  I had the same problem but might solve this problem by using TDK R CD or DVD

• Satellite L10 - 114 - it has a DVD burner?

  My laptop has a DVD burner on board. I know he'll make the CDs, but it will make the DVD.

  [Edited by: admin August 6 05 16:38]

  Hello

  You must have a DVD Super Multi drive, which can read and write all DVD, DVD +/-R/RW and DVD-RAM.

  Good bye

• Satellite 5200 801: how to replace DVD burning drive?

  Hello
  A few days ago, I decided to replace my CD/DVD burning drive (burn DVD at 1 x) with a more faster and more modern.
  The problem is that, while turning on my laptop, it stops without any error message, as if she could not recognize the hard drive, so there is no professional Windows startup (problem of configuration master / slave?).
  I tried with two different burning drives and I also upgraded the BIOS of the laptop to version 1.40 (date 17/04/2003), but there was no result.
  Help me thanks
  Riccardo - Lecce - ITALY (South)

  You guessed it right,

  It's a question of master/slave/CS.
  Find out your old drive (firmware DI has something like 170) and try to locate the sense of them (current setting of M/S/CS) of it through the Internet on specific DVD player forums.

  Then determine WHAT type of disc, you will need to buy to make it work on your computer (or find the firmware suitable for do this... you'll need a different laptop that DOESN'T RECOGNIZE the DVD drive in the State, it is now).

  DVD Slimline portable computer readers usually do not come with a rider to make this adjustment (M/S/CS) on your own but are set with the internal firmware for this. There are other ways on how to get it to work (to force a shortcut on the back of the card), but I would not go for it if I were you.

  Concerning
  chain

• Satellite Pro 6000 and SD-R6472 DVD burner

  In response to my previous posting (now locked), the engraver of the SD-R6472 DVD can be used with Satellite Pro 6000.

  Firstly used the dreaded IDE 1 # error will be encountered, but not panic, this can be overcome by asking the Technical Support CSEL-Changer Toshiba Software and this will change the master/slave setting of the drive.
  After that, everything works fine.

  Hello

  Thanks for the useful information.
  I'm sure that this information will help other users who have similar problems.

  Good bye

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• S good for Satellite 1400-253 DVD burner need

  Could someone give me the part number for the Toshiba dvd writer/burner
  or offer any compatible dvd burner to fit one

  Computer portable satellite 1400-253 s (ide connection)

  Thank you

  Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
  Due to this fact, you will not be able to find info on compatibility.

  If you need the list of compatible readers let us know but none of them is DVD burner.

• Updated by Satellite Pro 6000 with a DVD burner - technical question

  Hi all, I just bought a DVD burner that is adapted to the Bay of selection to replace the old DVD player...
  He came 'naked', so I thought I'd just disassemble the frame of the old drive and put it on the new...

  But: not the slightest Phillips screwdriver will integrate these screws; in fact, they look very special and I do not know how to remove...
  Should I have any instrument/tool special and if so, where do I get it? Maybe I'm too blonde...

  Someone here who can help?

  Thanks in advance! lionesse62

  Hello

  You need a special screwdriver to remove the module bay select (CD/DVD drive).
  A 2 mm screwdriver Phillips, a pilot of flat blade screw 4mm and a LHSTIX of 4mm screwdriver.

  I think you should visit a laptop computer technician if you n t have the right tool to remove these screws.

  However, if you want to remove the module bay select the Satellite Pro 6000 laptop then follow this instruction;

  (1) turn the computer
  (2) when the lock screw is in the locked position, remove the screws and fix it on the hole to keep her temporarily locking screws.
  (3) slide the lever and pull place the selectable bay module.

  After you remove the DVD rom, you need to remove the connector and the connector cover. The connector cover is fixed with screws of black 2M2x8 liaison.
  The frame is blocked with five super flat head white M2x3 screw.

  As I said, if you can not remove these screws and then ask a technician for help.

  Good bye

• Satellite M50 CD/DVD burning problems

  I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

  While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

  Does anyone have any suggestions?

  Thank you

  Hello

  Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
  Have you tried to burn CDs or DVDs from different manufacturers?
  I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
  Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

  Good bye

• Satellite 5100-201 a LG GSA 5120D external (Firewire) - DVD burner

  Material:
  Satellite 5100-201
  LG GSA5120D-connected via Firewire external DVD burner

  Software
  Windows XP SP2

  Problem:
  Windows is instability, often blue screen:
  IRQ_NOT_LESS_OR_Equal or other

  by stop Windows always shut down (Halt)

  Help me.

  Hi Victor,

  on the utility Cd & Toshiba tools is a program called «Register of IRQ routing V1.0»

  Maybe a reinstall might fix the problem!

  To bye chris

• I can build in the Satellite Pro 4600 DVD burner?

  Hiya

  Can anyone help with this? Has anyone equipped with a DVD burner (dvd - rw drive Toshiba sd-r6252)?
  Which models are compatible? I'm good fight opening and Exchange.
  Compatibility just in fact know.
  Thank you

  Hello

  I put t found any information if this drive is compatible with the Satellite Pro 4600, but you should be careful to replace the drive.
  You should check the dimensions of the car. Very important is the drive (master, slave, csel) settings because it is not possible to change this settings as on the usual desktop drive.
  I'm not sure about the settings on the Satellite Pro 4600 but the ASP Toshiba should know that.
  You can also order the caught player supported by the Toshiba service partner in your country.

• A new DVD burner for satellite pro 2100

  Ive got a satellite pro 2100 and I want to change the recorder to a dvd burner. is there a template I can get which will be a swap of right for in-house or will I need an external dvd burner? Thank you.

  HI Jamie,

  DVD writers usually come in two varieties, IDE usually designates those intended for 'slimline' and Office Tower systems which are generally mounted in laptops.

  The physical form of the player is usually constant models (in this case Toshiba use different brands in their notebooks). The device will have various plastic components fittings attached to it which will need tro be transferred to your new unit and have threaded metal accessories which are used to secure the unit to the laptop. These must also be transferred to the new unit.

  You also need device drivers dedicated to this new unit that can are provided on a CD or even be downloaded on the website of unit manufacturers.

  HTH

• For Satellite Pro 2100 DVD burner?

  I have a Satellite Pro 2100 which has a CD-RW/DVD-ROM drive and I would like to upgrade to a DVD burner but don't want an external. Could someone tell me which drive is compatible with the model number and where I can get hold of one? Can I get a Toshiba direct? Nowhere would really suit me I need to get one, but just don't know what I can and can not use! Thank you.

  Hi Jamie

  Unfortunately, he was unable for me to find this DVD burner, but if you want to update or change some parts of your laptop the best way is to ask ASP for compatible devices and supported.

  Good bye