Similar Questions

• Satellite L500-13D: all programs & settings are gone after upgrade to Windows 7

  Hello.

  My laptop is Satellite L500-13D

  I've upgraded to WINT in VISTA using official TSB upgrade disk.
  It seems that something was wrong. Win7 installed properly, but unfortunately all installed programs and settings are gone.
  I see also that when the upgrade $directories on C: and E partitions have been created; programs and older files are there.

  A few questions:

  1. is there a way to return return programs?
  2. how to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  3. download TOSHIBA RECOVERY CREATOR?

  Hi mate

  Have you read the manual that came with the laptop and Windows 7 upgrade disc?

  After an upgrade to Windows 7 you need additional disk with the upgrade tools that came with the Windows 7 upgrade disk.

  > 2. How to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  This is not possible because the recovery disk must be created at first running the operating system preinstalled by Toshiba.

  > 3. Download TOSHIBA RECOVERY CREATOR?
  If I know that cannot be downloaded.

• Satellite L500-14 X - battery does not load after upgrading to Win 8

  Hello

  after upgrating my laptop to win 8 battery continues to charge...
  the message says... "pluged but no current charging"...

  Any suggestions... except to reinstall win7...?

  Hello

  Usually, there is not much difference between Win 7 and Win 8 so I really put t understand why this battery issue must be linked to Win 8.
  In my opinion this isn't win 8 problem and I think that even if you install Win 7, this question is would not solve

  Try this:
  Disconnect the power adapter and remove the battery
  Now let the laptop disconnected for a longer period of time (10 hours)
  Then hold power button / stop along 30 sec and bring the two parties together.
  The adapter must be connected for a while to allow the ERP system the battery

• Re: Satellite L500-1XL - display problem after BIOS update

  Hello!

  I recently received a Satellite L500-1XL, works fine until I gave it to my friend...
  The problem is that he has updated the bios to V 2.10 (don't know why) and since then, the image on the screen appears as 15.4 "even in the bios.

  Any ideas what could cause the problem?

  Thank you

  Can you please make a picture how he looks in and post here?
  2.10 is the right version and I really put t understand what is the problem.

  Toshiba welcome screen appears as usual?

• Satellite L500-22R - memory problem

  I tried to upgrade my Toshiba L500-22R memory up to 8 GB. I bought 2 x 4 GB Kingston SODIMM 12800 PC3L, the operating system does not start, I did a check of memory and it fails too. I tried with a Samsung 4 GB 12800 and it fails too.

  The original memory works well.

  Any ideas?

  TXT of CPU - Z report:
  CPU - Z version 1.72.0.x64

  Information for processors
  -
  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25.0 Watts
  Basic speed 1187,2 MHz
  Multiplier x Bus 9.0 x 131.9 MHz speed
  2374,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Chipset
  -
  Northbridge Intel Havendale/Clarkdale Host Bridge Rev 02
  Southbridge Intel HM55 Rev. 05
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 4 GB
  Double channels (symmetrical)
  Memory frequency 527,6 MHz (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096

  Memory SPD
  -
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B6F
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  DIMM # 2
  SMBus address 0 x 52
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B87
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  Model of card mother NSWAA (0x0000017A - 0 x 00035690)

  DMI
  -

  DMI BIOS
  seller TOSHIBA
  version 2.10
  day 05/17/11
  ROM size 2048 KB

  System DMI information
  Manufacturer TOSHIBA
  product Satellite L500
  version PSLS9E-02Q01TCE
  series 3A747581K
  UUID {9ED22C15-2032-DF11-B751-705AB6880D1F}

  DMI Baseboard
  seller TOSHIBA
  model NSWAA
  Revision 1.00
  series 123456789AB

  Of course, you bought not compatible modules.
  PC3 12800 1600 Mhz isn't listed as a module support.

  Satellite L500 can scale up to 8 GB of RAM and you can use two modules MHz (PC3-8500) 4 GB DDR3 SO-DIMM 1066.

• Satellite L500: What Win 7 I will get reocvery disk: 32 or 64 bit?

  Hello

  I recently bought a Toshiba laptop (Satellite L500) which was preinstalled with a 64 bit version of Windows 7, stored on the hard drive, but unfortunately I have not create the 64 - bit recovery of it support.

  So when I installed the 32-bit version of Windows 7 all data on the hard drive, including Windows 7 64 bit and its backup became erased.

  I tried to order a recovery disc 64-bit Windows 7 for my laptop on the Backup Media of Toshiba Europe online store but when I go to the associated Web page and enter the serial number of my PC to identify the backup media that I need for my PC, there is just some information about the name of my PC model and price of the recovery disc without giving details of the version of the recovery disc.

  So I don't know if I commander order for a recovery disk, will be sold to me which version of Windows 7 (32-bit or 64-bit? ) ?

  I would be very grateful if you could share your knowledge with me about it.

  Thanks for your help

  What is the model number of the L500? (PSLxxx-xxxxxx)

  Google the model number and look at the booklet, which will tell you what OS it came with.

• Satellite L500 - how to get the keys FN works on Windows 7 64 bit?

  Hello

  I need to reinstall Windows 7 on a Satellite L500, but I can't get the FN keys to work. Someone here would be able to give ideas on how to get this to work?

  Case No.

  Hello

  It's pretty easy. Go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] and download the utility of Vap and Flashcard support. Then, install Vap and restart your laptop. After that do it for the support of Flashcard.

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• Satellite L300D BSOD on reboot after updates to Win7 64 bit

  Satellite L300D BSOD on reboot after updates to Windows on Win7 64-bit (toshiba version). Restoration of the system, safe mode, nothing helps.

  I am now installing the 32-bit version, but hey, 64-bit must be possible, does it not?
  I'm open to good ideas.

  Thanks much for this information.
  Seems the BIOS update would solve the BSOD with Win 7 64 bit OS problems

  Welcome.

• Problems syncing notes app after upgrading to iOS 10

  Hi all

  I hear a lot of people having the same problem on the web.

  After upgrading my iPhone 6 s more and iPad Pro iPad 9.7 ", kept perfect notes that I saved in the Notes application (like my MBP / iMac too), while on my iPhone, I've known many sync problems and even lost notes and records.

  1. I tried to pass and on the synchronization of Notes in the iOS iCloud preferences, with a reboot between stocks. Nope. No synchronization, and when I turned on sync I lost almost all of the notes previously saved in my iPhone, so I now 15 notes instead of 175. This ONLY happens on my iPhone, while iPad / MBP / iMac yet.

  2 - I tried to create a new folder in my MBP or in my iMac, hoping to "stimulate" a new event to Resync through all my devices. Not for the iPhone, but synchronized on my iPad / MBP / iMac.

  3. today, I made a backup of my iPhone, reinstalled the iOS 10, then restored the backup.

  Nope.

  Any ideas, guys?

  Thank you

  Luca

  EDIT: actually sync problems seems to occur exclusively on the side of the iOS. This also includes the iPad. Fortunately, I didn't have the great idea to disable the synchronization of Notes in iCloud on my iPad, as I did on the iPhone.

  I'd lose certainly all currently stored notes in my iPad too.

• Problem of LTE connectivity after upgrade to iOS 10-SE

  Do not know if everyone knows this, but after upgrade to iOS 10 on my iPhone SE when I leave one area LTE and go to the services area or area No. less than LTE and re - enter a LTE area, I have no service. There is no service or reports 4g, but when I use an app, it says no network not connected. I tried all the usual stuff... Restored from backup, cleared cache, reset the network connections, did a hard reset, nothing works. The only thing that comes to LTE turns the phone then turn it back. All this experience? I have never had this issue before moving to iOS 10.

  I think you have the same problem described here:

  After briefly losing service, iPhone will fail to connect to the cellular network until you restart

• Upgraded to Win7 32-bit to 64-bit on Satellite A500 - 15 M

  Satellite A500 - 15 M PSAM0E-00M00PEN

  I have the disc update Toshiba Windows 7 family premium 32-bit and 64-bit
  I have upgraded from Vista operating system preinstalled
  I chose the 32-bit option.

  I choose 64-bit with the same disk?

  If yes how?

  Hello

  As far as I know the laptop came with VISTA 32/64 Bit HOME PREMIUM system (DOUBLE).
  So, you can use Vista 32 bit or 64 bit

  Just to clarify this: you used Vista 32 bit in the past and updated the Vista 32 bit to Win 7 32 bit. Right?

  Well, if you want to use Win 7 64 bit, you can upgrade to Vista 64-bit for Win 7 64 bit, or you must be a new install of Win 7 64 bit using a floppy Microsoft Win 7 64 bit.

• Problems printing reports from Magny accounting V16 (win7 32 bit)

  Hello

  I am haing issues with our Hp C7180 (connected wifi printer)

  We have 2 printers on the system, a Lexmark is also installed.

  When you try to print a "notice of pay" Magny accounting V16...

  If the Hp C7180 is the default printer... MYOB breaks down...

  If the Lexmark is default printer... Prints ok...

  If the Lexmark is default... myob will build the report ok and I can then choose to print to the HP C7180 and it prints very well...

  If its only if the HP is selected by default when you create report... which causes the program to crash...

  Strange driver problem?... I loaded the updates for the drivers of Hp... through HP update...

  The system is Win7 32 bit

  Other reports seem to work ok... with the ch as default...

  We used the years Lexmark printer (16 MYOB is dated program)... never a glitch...

  HP seems to be ok for the most part, except the tips of the payroll reports...

  I doubt that it is the program MYOB causing the fault... I mean that a printer is a printer isn't?

  Thanks for any answers

  DMG

  Thanks for the reply.

  I just thought I inform HP incase the problem is also with the never the Versions of MYOB, I can't test those since we only V16.

  The work around is enough, since I'm only using the printer to blow through a cartridge expired HP, will return to the use of the Lexmark when its empty.

  See you soon

  DMG

• Connection problems wireless Broadcom 1704 after upgrade to windows 10

  Connectivity problems after upgrade to windows 10 intermittent wireless;  Have an Inspiron 5748 with adapter Broadcom 1704.  Driver is up to date: 7.35.295.0.  Diagnostic shows no problem with the unit.  Will be generally connect to the network, but the connection is deleted intermittently.  Troubleshooting to solve using leads to restore connectivity, but it will then drop again intermittently.  Never experienced problems before windows upgrade 10.

  steveshuff,

  Here are a few parameters to change on your adapter wireless for better performance.

  Turn on and off then on all devices on the network

  1. Turn off the power to the broadband modem and let the modem broadband disconnected for at least 3 minutes.
  2. Shut down all computers that are connected to the network.
  3. Remove power from the wireless router.
  4. Check that a network cable is connected the modem to broadband in the Internet or the wireless router's WAN port.
  5. Check that no series cables or USB are connected to the Modem on broadband.
  6. Connect the power supply to the modem broadband. Wait at least 2 minutes for the Broadband Modem to initialize.
     (If the Modem does not provide Internet connection successfully, unplug the Modem. Wait at least 5 minutes, then plug the Modem back.)
  7. Connect the power supply to the wireless router. Wait at least 2 minutes for the wireless router to initialize.
  8. Turn on the computer and try to connect to the Internet.

  Difficulty of wireless network connections

  Turn off airplane Mode

  For Dell Wireless adapters:

  1. In the Search box, type Device Manager.
  2. Press or click (Control Panel) Device Manager.
  3. In the Device Manager window, click on the sign of the arrow next to network adapters.
  4. Double click or double-click the Référence Dell Wireless WLAN Card.
  5. Click the Advanced tab.
     Note: These options are not available according to the installed wireless adapter.
  6. In the property: box highlight AP Compatibility Mode, select broader compatibility under value: from the menu drop-down.
  7. In the property: box, highlight the Minimum energy consumption, select disabled under value: from the menu drop down.
  8. Click OK.

  For me, to help troubleshoot, please click on my DELL-Jesse L and send me a private Message with the number of Service Dell and your Dell order number.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan