Satellite L500-12 t system recovery from recovery discs

Similar Questions

• System Disk Image recovery and system recovery discs discs

  These terms are very confusing.

  I had 3 HP computers to office over the past 15 years and have always comes to an ERD but my luck could escape and I'm going to need one of them.

  However, I'm confused.  I thought that as HP comes with a drive D: original Image, it would be enough.

  I make records of recovery or system disk Image?  Are they the same?  My HP Advisor on this computer again I do "system recovery discs!

  I would really like someone explain (in novice language) which mean the above and what I need to do?

  I appreciate so much people in the help forums, as I learned more from them than books I have.

  Twinkie3

  Twinkie3

  Hello Twinkie3, I suggest making the game to restore HP Recovery disks.  Even if you have the recovery restore D: hard disk partition, it may be damaged or if the hard drive fails and needs to be replaced, you would not be able to access the recovery partition.

  If you have to replace the hard drive, you can only insert disc 1 of the the recovery set and put the system back as it was when shipped. Without these records, you would need to try to acquire at HP for a cost to you, and after a while, they are not available.

  The set of recovery disks cannot be done once and only be used to restore your particular system.

  Normally, it takes 3 DVD discs but can take longer depending on the size of the restore partition.

  The HP advisor don't constantly remind important you to these disk since it's a step in maintaining your system over time.

• HP system recovery disc for the PC HP Pavilion?

  I press a dozen HP desktop systems.  In my software collection, I found a three-disc set of HP system recovery discs that were not labeled with a hint of the association of the system.

  The discs are marked by these numbers = 5012-0414, 5012-0415 and 5012-0416.

  It would be helpful if someone can tell me which PC HP Pavilion, these discs are designed so that I can either label or throw it out.

  Thank you very much for the time and effort to help me!

  Hello:

  According to this, they go to a HP Pavilion HP 8750 C.

  http://www.com-com.co.UK/basket_enquiry.ihtml?PN=4500078 ~ add = Y ~ cs = CL_availability_link

• Satellite L500-20 X - no recovery disk

  Hi all

  Since yesterday my Satellite L500-20 x have only called Bluescreens 'Driver not less than or equal'--> Restart! It starts with win7 until the opening of the session, after that reboot every time. I try a lot of things to fix:
  Systemrepair (3Times) and no change
  Recovery of SystemRecovery (per disk HARD no CD) work but always bluescreens and no change to solve the problem.
  Memory check (from Win7) checked 3 times 100% ok.
  Toshiba HDD Recovery (I try several times but it turned off each time by bluescreen process... so I can't do that - unpossible complete recovery!)

  This is the first laptop I have buyed all and I've never heard of a recovery disk - so I don't create one! Now, I can't get in win7 - so I can't create it now. Anyone have any ideas? I want new windows to install... but I do not have the same Win Disk. Win = Win7 64 bit laptop all I have is WIn7 32 Bit for my HomePC.

  I need help!

  Salvation of the beam,

  If you don t have a Toshiba Recovery disk, you can order one at Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  It's worth a try if HDD recovery option doesn't work properly.

  If you order such a disc and install the original on the HARD drive settings will be restored. A clean install factory with all the drivers and tools (on the settings in the box) will be restored, and if that doesn t work, this seems to be a hardware malfunction

• Satellite L500-19 - remove the recovery partition and create new

  Hello!

  I bought a new Toshiba Satellite L500-19th with Windows 7 Home Premium (64-bit). So far, everything is brilliant work.
  I have already created the recovery DVDs.
  As a result, could now delete the partition with the recovery program? I want to use the full space of my hard disk and create partitions as I want.
  But I don't know how I should do this?
  Could you please help me?

  Oxford

  If you are sure that the created recovery DVD is ok at 100%, you can delete all data on the second partition.
  Open Windows Explorer on the left side where is the second partition, click with the right button of the mouse and choose the FORMAT option.
  Choose the quick format option and click START.

  After a minute or two, all data will be gone.

  Please note: in the future when you want to use recovery DVD for installing Win7 the whole HARD disk is deleted and you will lose all your data.
  Using recovery DVD you can not format the C partition only.

• Satellite A350D - 20K - need Toshiba Recovery Disc Creator for Win7

  Guys I'm on Satellite A350D - 20K

  before or the original operating system from my laptop has been * Win Vista 32 bit * but I have choose changed from * Win7 64 bit *...
  I have already downloaded the other drivers from this site for my new OS, but it is not complete, in any case, this isn't a big deal.

  I just want to have an installer for * Toshiba Recovery Disc Creator for win7 64 bit *.
  before on my win7 32 bit there is a Toshiba Recovery Disc Creator ("but it doesn't have an installer on my backup CD I do not know why?")

  I looked for an installer here but the only thing I saw was for Win Vista, I tried to install it luckily it has been done successfully. He invited s to restart, so I restart my laptop so I tried to open the application, but there was an error message that invites it goes like this

  "NO HDD RECOVERY AREA!
  "The Toshiba Recovery disc can not be started."

  CONCERNS:

  * I want to ask you guys if you have an idea why it goes like that?
  * You have an idea where I can get the good installer for my new OS

  Please GUYS I NEED YOUR URGENT help BECAUSE I want TO SAVE FIRST MY drive HARD BEFORE I'll install new applications or before so I will use it.

  Thank you good guys...

  Hello

  Toshiba Recovery Disc Creator is a tool of Toshiba that created the recovery disk available on HARD drive recovery image.
  It s NOT support tool like Ghost, etc. that allows you to create an image of your operating system preinstalled.
  If the Toshiba Recovery files are not available on the HARD drive then the Toshiba Recovery Disc Creator will not work!

  Welcome them

• Satellite P300 - - what are product recovery discs contains Vista?

  I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

  (1) would be to reformat my laptop to fix those problems?

  (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

  Is that mean they contain vista? (vista came pre installed

  (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

  (4) how would these discs...

  I you thankful if you could help, its a super computer

  Conduct research on how to operate the discs, just want to make sure that they contain vista

  > 1) would be reformatting my laptop fix these problems?
  Probably yes

  (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
  As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
  This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

  (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
  You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

  (> 4) how would these discs...
  Usually you have to boot from that disk

  PS; For more details you should read the user manual and must read the discussions in this forum!

• How can I create system recovery disc for a new laptop with windows 7 Home Premium?

  I just bought my daughter a new Toshiba Satellite with Windows 7 Home Premium laptop last night. The laptop came with a Windows restore disk. How to create a set of boot from the DVD then when the system fails, or I need a new facility? I created a system repair disc and two-disc Image recovery. Is this enough to fully restore Windows 7 to the initial state of machines? (Technology at best buy assured me that it was nothing that I was able to do and that they would do for me for $70.00.)

  In short: my Dell came with a system recovery disk which was very convenient. I would like to reproduce this convenience with Windows 7. Any help appreciated.

  Jim

  You will need to follow the manufacturers directions to create the recovery media. Looks like you've done that, but Toshiba could only say with certainty. I recommend that you contact their customer service.
  Kerry Brown MS - MVP - Windows desktop experience

• Satellite Pro A120 - cannot install recovery disc

  Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

  It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

  FYI, this is what happens after installing the hard drive:
  I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
  I insert the product recovery disc, put off and then again when you press F12.
  I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
  I then get RAMDISK image loading... which takes less than 2 minutes.
  I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
  I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

  Any ideas anyone?

  Thank you.

  Hi Lapitup,

  Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

  If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

  In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

• Satellite P10 - repair on the recovery disc option

  My Satellite P10 crashed, which suggests an error of hard disk may be imminent, I have a recovery disk, but it doesn't have a repair option, only a full recovery. As I would like to try to retrieve some data, is there a repair option, normally associated with these discs.
  If yes where can I get one?

  Thank you

  Recovery disc has no repair option. Recovery disk contains only the recovery image. Try to get the facilities of Microsoft CD and use the fix here. If you will not be able to repair the operating system pre-installed as a last option, you can use the recovery disk and install recovery image.

  Bye and good luck!

• Satellite A200 - burn image HD recovery discs?

  I'm working on a Satellite A200, who does not the recovery discs and now seems to have one messed up the Vista installation.
  Before I started working on this, I created images of backup hard drives 3 partitions (C:\, TOSHIBA SYSTEM VOLUME & HDDRECOVERY) which I backed up on another computer.
  My question is, can I create these images recovery discs? The machine boots, they are saved on triple XP, Vista & W7, they were created using ShadowProtect Desktop.
  I can mount the images in each operating system...

  As far as I know this can be a problem now. Recovery media can be created when the laptop to factory settings. This means that available "Toshiba Recovery Disc Creator" tool and recovery image placed on the second partition.

  When you move this image of recovery elsewhere and return later, sometimes "Toshiba Recovery Disc Creator" cannot find files and more.

• Satellite L500-1ek - installation system always starts with 800 x 600

  I have the Satellite L500-1ek new laptop with Windows 7.

  Regardless of the screen resolution still set the system starts with 800 x 600. And not only after reboot but even when I logout my profile and connect again.
  Learn more: I also use external monitor. I have the mirror of my laptop computer on the monitor screen or only the display on a monitor, but whatever I have I cannot have extended screen.

  When I try to put in place I'm simply ignored by the driver.

  So I tried to install the latest driver. I downloaded it from the Toshiba site but it installed never tell me that my system did not meet the minimum requirements.
  What to do now?

  Marek

  Hello

  For me, it looks like you used the incompatible graphics driver.
  Have you noticed this problem using the OS preinstalled Toshiba?

  AFAIK you unit was equipped with the INTEL GL40 graphics chip.
  Have you tried the driver from the Intel page as well?

  Check it!

• Failed to initialize the system recovery discs.

  I have a set of DVD for Vista Home premium system recovery and I would like to re - install the original system installed at the factory which is corrupt.

  The instruction of disc is inserted into the optical drive and follow the on-screen instructions. When I do cela screen goes directly to the Explorer and lists the contents of the disks.

  I can not get the drives to run and shows nothing at all.

  Can anyone give an answer please?

  Thank you

  John crew

  Hello

  try to make the CD/DVD drive in the boot order 1

  And make sure you only set the CD/DVD drive to be 1st in the boot order to boot from the disk

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  _____________________________________________________________

  If above does not solve this the manufacturer

  It's their recovery process not microsofts

• How can I create on my Acer system recovery discs?

  I need to store window 7 onDVD (back-up for window 7) for a brand new with Windows 7 operating system already in computer

  
  

  I compurt any new branch (ACER expires), already having Windows 7 installed. They advised me 1st step is to have a back-up for window 7.

  I want to do it myself, I began to use the computer again.

  • Can you send me guide/steps to store my window7 on DVD?
  • How many DVDs I need, I have a box of 4.7 GB dvd, so 4-5 enogh?

  Thank you

  Rafid

  When you use the Acer software to make records of recovery, 4-5 should be enough.

  Acer - create recovery discs:

  http://Acer.custhelp.com/app/answers/detail/A_ID/12866/kW/recovery%20disk

  Your Acer computer includes an eRecovery Management software that allows you to perform operations of restore directly from your disk hard drive , which allows a faster recovery process and no need for discs. eRecovery Management does, however, allow to create recovery discs. The recovery disks will allow you to restore your computer something happened to your hard hard disk .

  Note: According to Acer computer you have your eRecovery Management version may be slightly different, but the ability to create your discs will be available.

  To create your recovery discs backup follow these steps:

  1. Click on the Start menu, and then click all programs.
  2. In the list of programs, click the Acer file, and then click the Acer eRecovery Management .
  3. User account control Windows may request your permission to run this program, click Yes.
  4. In the Acer eRecovery Management window left click backup, and then click create a default disk factory.

     Note: If you use a laptop or netbook, you will be asked to connect your power adapter, make sure that the power adapter is plugged in before continuing, and then click OK.

  5. In the page to create a default disc factory select the drive you want to use for burning the recovery media, and then click Start.
  6. The disc is ejected whenever he has completed burning, if several drives are required insert a new disc when you are prompted, and then click OK.

  What makes a system image is another option, but it will usually more then 4-5 DVD.

  Create a System Image in Windows 7 before installing
   
  You can make an image of your installation of Windows 7 system and it allows to restore Windows 7 to its state when the image was made.
  1. click on the Start Menu and type "Save" then click on back up your files.
  2. then click on create a system image.
  3 select the location where to save the image of your system, and then click Next.
  4. check your discs to back up, and then click Next.
  5. verify the settings, and then click Start backup to start.
  6. once the backup is complete, it asks to create a system repair disc, click Yes.
  7. Insert a CD or a blank DVD on the hard drive, then click on create disc.
   
  How to restore Windows 7 from a System Image
  http://www.howtogeek.com/HOWTO/7702/restoring-Windows-7-from-an-image-backup

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Recovery Media Creator does not create system recovery discs

  Recently purchased Toshiba Satellite C660-21Z and tried to create recovery discs, as recommended. Recovery media creator fails systematically on disk #1 and #2 with error messages when posting:

  Failed to read E:\sources\boot.wim (error Code 020150-20-00000000).

  Have tried different types of DVDs without success. Anyone able to help?

  Hello

  Check it please THIS thread and I hope you find the solution to this.

  Good luck