Satellite L500-19th - Microphone stops working after a few words

Similar Questions

• Satellite L750 - internal speaker stopped working after a few minutes of use

  Hello

  Sorry, but I had to use pastebin because when I want to post, the site send me '403 response Code '...

  This is my problem:
  https://pastebin.com/aaLdCxju
  Does anyone have an idea on how to fix this?

  Any help would be appreciated

  Satellite L750 - 1 H 3

  Have you tried to ask for help on the forums of Linux?

• The mouse stops working after a few minutes

  Original title: my USB mouse ch

  My mouse stops working after a few minutes. whenever I have uninstall and re - inserts into the usb port of the computer does not recognize it.what can I do?

  Hi Ann Juel,

  1. what happens when you connect the USB mouse to the computer? You get the error message?

  2. What is the brand and model of the computer?

  3. What is the brand and model of the mouse?

  4. What is the operating system installed on the computer?

  We will analyze and identify the cause of the problem.

  Method 1:
  

  You can connect the mouse to another computer and check. Also perform the methods provided.

  Also, try a different USB port and check.

  Method 2:

  Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.

  Follow the link below a convenience store opened.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 3:

  Check whether all settings in the mouse properties are correct or try to change the mouse settings and if it works.

  Change the settings of the mouse
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  Hope this information helps. Response with status so that we can help you.

• AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work

  I just upgraded a fairly new computer of mine from Vista to Windows 7 Professional.  The upgarde went well however the AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work.  I tried to make the show thumbnails of running programs to display in the taskbar with no luck.  Any suggestions?

  Hi Lisa52465,

  (Already responded to dadams26 in a separate thread and it fixed the problem beautifully).

  Have you tried to run the Aero Troubleshooter? If this is not the case, try this:

  1. open the control panel

  2. go in the system and security category

  3. go to the Center of the Action

  4. click on the link to solve common computer problems

  5. click on appearance and personalization

  6. Select Aero

  He must either correct the errors problem or the State to determine the cause.

  If the Aero Troubleshooter is not the thing, maybe it's just that the Aero feature has been disabled by the update. Try this:

  1. right click on the desktop

  2 select Customize

  3. Select an Aero theme

  4 see if previews back

  Just for the record, could you let us know if any of the suggested fixes works (and which). If you still have problems after trying the above, could you please come back with more details (if possible).

  > This answer help?  If so, would you please click the green button to Vote as helpful to help future visitors encounter the same problem.

  All the best,

  Sharon

  Sharon Roffey
  Queensland, Australia

• "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  "First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.

  I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.

  All other non - CC Adobe video editing programs work.

  Help, please. Thank you.

  Dennis,

  Changing the video rendering engine should have solved the problem. Is it still pending?

  Thank you

  Regalo

• Satellite Pro A200 - Webcam stop working after 10 to 15 minutes

  Hello

  I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.

  Please send me some suggentions how to solve this problem.

  Thank you [email protected]

  Hello

  How did you notice this problem? You get an error message or something else?

  It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Install the latest version and try again.

  By the way: you run factory settings or you have installed your own version of Windows?

  Welcome them

• Arc keyboard stops working after a few minutes of inactivity

  The arc keyboard stops working after about 10-30 min to be idle. I can unplug/plug usb receiver or take out / replace batteries and still doesn't work. I have to restart the computer to make it work again. Any ideas?

  Thank you

  Hello

  Please update us with this information.

  I suggest you to update your computer with the latest version of the Microsoft IntelliType Pro for your keyboard and check if that helps.

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 32 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26949

  Keyboard Microsoft IntelliType Pro 8.2 for Windows - 64 bit software

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=26950

  Come back and let us know the State of the question, we will be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Satellite L500 - CTRL keys stopped working

  The two CTRL buttons have stopped working on my Toshiba L500, I think they may have inadvertently been extinct as all other keys on the keyboard are in perfect working condition.

  Is there a way to toggle the buttons CTRL?

  Try please press CTRL + ALT + FN and check if that helps.
  Please post comments. I would like to know if this will help.

• Satellite A300 - some keys stopped working after downgrde from Vista to XP

  Hello

  Excuse me for my bad English. I have a problem with my Satellite A 300 PSAG4E-0450. Operating system went from Vista to XP. Easy keys, keys shortcut and illumination stopped working. All the drivers have been downloaded. I tried to find it in Control Panel-> Toshiba controls. I changed to bright power, but this isn't work. If I try to turn it off, I see a window with "choose order".

  What can be wrong?
  Thanks for your help.

  Hello!

  As far as I know, the lighting can be disabled and enabled in the BIOS.
  Check it!

  To shortcut keys, you should try to install the Toshiba controls and utilities hotkey.
  From Toshiba Web site: http://eu.computers.toshiba-europe.com

  I hope it's useful for you.

  Good bye

• new faucet botton has stopped working after a few updates

  Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Stor.E access point stops working after a few seconds

  Bought a Stor.E wireless adapter and followed the instructions but after turn on the unit by connecting to USB power usage provides cables, access point WIFI disconnects after 4 or around seconds.
  1. I connect to usb power
  2. the indicator flashes in green and stays on
  3. wireless light turns green and stay on, turns off after a few seconds

  Managed to connect using the mobile app several times, while its sequel, but given that the WIFI point disconnects, can't use it.

  Any thoughts?

  1. I connect to usb power

  Stor.e wireless adapter must be connected to the power supply and the other end to the external HARD drive.

  

  Then, you can use the application to access the wireless content.

• Why Lightroom stop working after a few minutes of use?

  After a few minutes if through my photos, it charges constantly and become all pixelated. Boxes initially get grayed out and becomes completely unusable. I leave force LR, but it will not reopen even. The LR app will jump just constantly going up and down on my dock when you try to open. I have to restart my computer everytime I want to use LR which lasts only a few minutes before failing. This started happening since I installed the El captain.

  Hi Johanna,

  Please follow the link below to manually disable the graphics processor.

  Adobe Photoshop Lightroom Help | Graphics processor (GPU) acceleration, troubleshooting & FAQ Lightroom

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Satellite L350D-118 Vista stops working after the error to install Windows XP

  I have a L350D - 118 (PSLE8E) bought 2 weeks ago and is installed in Dutch.
  My plan was to make it dual boot with Windows XP Professional.

  I resized C: partition using the Vista Disk Manager to make more room for the XP partition.
  I then tried to create a new primary partition, but I only could make an extended partition (so I did not).

  Then I put in my teacher XP + SP2 installation CD in the disc drive to see if I could install XP on a new partition to be created using the installation program itself. But the XP installation program fails before the installation starts with a message that an error has occurred and not further so that he could cause damage (the bottom line: stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000).)

  When I rebooted, Vista has not loaded, but there is only a flashing cursor in the upper left corner of the screen. X (there is that no message as not found operating system, or something like that.
  When I press on and/or press and hold F8 while loading the Bios, the same thing.
  The laptop is also transformed the immediately after pressing the power on button, instead of having to wait 4 seconds.

  Then I inserted the DVD of Vista Premium x 32 I have from my PC. This displays a message, press any key to boot from the CD/DVD... If I press a key, there is a bar "loading files" style back and after a loading bar Vista-style. After that, it still displays a flashing cursor in the upper left corner of the screen.
  When I retried with pressing F8 and select last known good configuration, it blocks the same way.
  When I retried with safe mode, the screen freezes after Loaded: \windows\system32\drivers\disk.sys

  I also tried the Windows XP edition family, and Windows XP Edition - family + SP2, but all abandoned and gave the same error message.

  I tried to start with the prompt with a CD of Windows 98 SE. It works, but it can not find the drivers for the DVD-disc drive and since W98 doesn't support NTFS I don't see what is on the C: partition. :-(

  I did a recovery DVD because it is already on the D: partition and I do not plan on using Vista.
  There was also a non dos partition of 1.5 GB at the beginning of your hard drive. This is mentioned in the guide of the 3-8 regarding the system recovery options.

  Is there another way to take a look at the C:-partiton or get HARD drive recovery tool work?

  If you say that the [http://backupmedia.toshiba.eu] Toshiba Recovery DVD, how did you it will work. ?:|

  Thanks for any advice.

  Hello

  I must say that your ad is very interesting and dual boot is a topic where people can write about experiences.
  Last month, I did my own experiences and want to share with you.
  At first, I must say that your ad is a little confusing. Let's start with General things.

  Dual boot (installation of two BONES) is without any doubt, and I see no problem here.
  It is just important to have two partitions on the HARD disk. If you have preinstalled in C that you want to use in the future or create one with disk manager or just start the installation of the OS and the Windows installation to create the second partition.

  If your laptop has two hard disks, you can also install the second partition on the first partition, which belongs to the second HARD drive.

  With short words, all options are open and it's just important to know what you want to do exactly. If I understand you right, you cannot boot OS preinstalled.

  The problem is that after having playing with partitions, you will not be able to use the saved on the HARD drive recovery image. This score from GB 1.5 has nothing to do with the recovery image, and it is characteristic of Vista. If everything is OK, you can enter if you F * to start and choose the first option called fix my computer.

  You can see this option after using F8 at startup?

  I really don't understand why you have this error message when you start installation of WXP. What you can do is to set the default BIOS settings and try again.

  If you order the Toshiba Recovery DVD, you will be able to reinstall the OS and have once again the factory settings. Maybe you should buy it. OK, it costs about 40 Euros, but this isn't a bad idea to have the original recovery DVD. Perhaps one day you want to use Vista or you want to sell your laptop. It's good if you can also offer original recovery with her media.

  Sorry if I forgot to comment on something in your ad. If you have any questions please let me know.

  Good luck!

• Satellite L755 - audio just stops working after executing any program

  Hello

  updated drivers two weeks ago. BIOS for the most part, the rest just refuse to be installed, and after a while no matter what software I used, stops just audio after 1 to 4 minutes. I don't know if he has a relationship but the usb port, none of them, will not provide power to my cell phone and which occur along side the audio issue.

  I tried to remove the drivers and reinstall them, but it did not help. done the same with the software dealing with the issue as well, but... Nada!

  Investigating google for hours and seen tons of this problem.

  All solutions?

  Have you ever tried to reset the laptop to factory settings using the Toshiba Recovery disk?
  If the driver update or reinstallation did not help in the past and you have no idea how fix a particular problem it s advisable to run run system recovery.

  However, I think you should also try this workaround:
  Firstly uninstall the audio driver.
  You can do it in Device Manager. Expand the Audio area, Video, Game Controller and uninstall/remove the driver (Conexant) sound.
  Also remove the entry of High Definition Audio Controller (Intel and nVidia)
  Then restart the system.

  After the reboot, the devices removed / uninstalled should be recognized automatically by the Windows System. After that, you could test its new