Satellite L755 - audio just stops working after executing any program
Hello
updated drivers two weeks ago. BIOS for the most part, the rest just refuse to be installed, and after a while no matter what software I used, stops just audio after 1 to 4 minutes. I don't know if he has a relationship but the usb port, none of them, will not provide power to my cell phone and which occur along side the audio issue.
I tried to remove the drivers and reinstall them, but it did not help. done the same with the software dealing with the issue as well, but... Nada!
Investigating google for hours and seen tons of this problem.
All solutions?
Have you ever tried to reset the laptop to factory settings using the Toshiba Recovery disk?
If the driver update or reinstallation did not help in the past and you have no idea how fix a particular problem it s advisable to run run system recovery.
However, I think you should also try this workaround:
Firstly uninstall the audio driver.
You can do it in Device Manager. Expand the Audio area, Video, Game Controller and uninstall/remove the driver (Conexant) sound.
Also remove the entry of High Definition Audio Controller (Intel and nVidia)
Then restart the system.
After the reboot, the devices removed / uninstalled should be recognized automatically by the Windows System. After that, you could test its new
Tags: Toshiba
Similar Questions
-
Satellite Pro A200 - Webcam stop working after 10 to 15 minutes
Hello
I need help to solve this problem. I use the Satellite Pro A200 with Windows Vista. When I use my computer online my web cam stop working after and never restart again until my computer restarts.
Please send me some suggentions how to solve this problem.
Thank you [email protected]
Hello
How did you notice this problem? You get an error message or something else?
It's really hard to say why this happens, but first I would try to update the driver for the webcam. You can get the latest version on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversInstall the latest version and try again.
By the way: you run factory settings or you have installed your own version of Windows?
Welcome them
-
Satellite A300 - some keys stopped working after downgrde from Vista to XP
Hello
Excuse me for my bad English. I have a problem with my Satellite A 300 PSAG4E-0450. Operating system went from Vista to XP. Easy keys, keys shortcut and illumination stopped working. All the drivers have been downloaded. I tried to find it in Control Panel-> Toshiba controls. I changed to bright power, but this isn't work. If I try to turn it off, I see a window with "choose order".
What can be wrong?
Thanks for your help.Hello!
As far as I know, the lighting can be disabled and enabled in the BIOS.
Check it!To shortcut keys, you should try to install the Toshiba controls and utilities hotkey.
From Toshiba Web site: http://eu.computers.toshiba-europe.comI hope it's useful for you.
Good bye
-
Windows live mail stops working after closing the program
Although Windows Live Mail sems to work properly, every time I close the program, I get a dialog box indicating that the program has stopped working and windows will notify me when the solution becomes known. After searchign this topic I cam in all of the discussion in
And I started Widnows in a boot minimum - and still encountered the problem. I am running Vista Home Premium SP2 with Live Mail 2011; My Anti Virus is Norton. Thanks for any help.
Please publish on Windows Live Solution Center.
Here is the link to the e-mail discussion forum:
http://windowslivehelp.com/forums.aspx?ProductID=15 -
Satellite L350D-118 Vista stops working after the error to install Windows XP
I have a L350D - 118 (PSLE8E) bought 2 weeks ago and is installed in Dutch.
My plan was to make it dual boot with Windows XP Professional.I resized C: partition using the Vista Disk Manager to make more room for the XP partition.
I then tried to create a new primary partition, but I only could make an extended partition (so I did not).Then I put in my teacher XP + SP2 installation CD in the disc drive to see if I could install XP on a new partition to be created using the installation program itself. But the XP installation program fails before the installation starts with a message that an error has occurred and not further so that he could cause damage (the bottom line: stop: 0x0000007B (0xF78D2524, 0xC0000034, 0x00000000, 0x00000000).)
When I rebooted, Vista has not loaded, but there is only a flashing cursor in the upper left corner of the screen. X (there is that no message as not found operating system, or something like that.
When I press on and/or press and hold F8 while loading the Bios, the same thing.
The laptop is also transformed the immediately after pressing the power on button, instead of having to wait 4 seconds.Then I inserted the DVD of Vista Premium x 32 I have from my PC. This displays a message, press any key to boot from the CD/DVD... If I press a key, there is a bar "loading files" style back and after a loading bar Vista-style. After that, it still displays a flashing cursor in the upper left corner of the screen.
When I retried with pressing F8 and select last known good configuration, it blocks the same way.
When I retried with safe mode, the screen freezes after Loaded: \windows\system32\drivers\disk.sysI also tried the Windows XP edition family, and Windows XP Edition - family + SP2, but all abandoned and gave the same error message.
I tried to start with the prompt with a CD of Windows 98 SE. It works, but it can not find the drivers for the DVD-disc drive and since W98 doesn't support NTFS I don't see what is on the C: partition. :-(
I did a recovery DVD because it is already on the D: partition and I do not plan on using Vista.
There was also a non dos partition of 1.5 GB at the beginning of your hard drive. This is mentioned in the guide of the 3-8 regarding the system recovery options.Is there another way to take a look at the C:-partiton or get HARD drive recovery tool work?
If you say that the [http://backupmedia.toshiba.eu] Toshiba Recovery DVD, how did you it will work. ?:|
Thanks for any advice.
Hello
I must say that your ad is very interesting and dual boot is a topic where people can write about experiences.
Last month, I did my own experiences and want to share with you.
At first, I must say that your ad is a little confusing. Let's start with General things.Dual boot (installation of two BONES) is without any doubt, and I see no problem here.
It is just important to have two partitions on the HARD disk. If you have preinstalled in C that you want to use in the future or create one with disk manager or just start the installation of the OS and the Windows installation to create the second partition.If your laptop has two hard disks, you can also install the second partition on the first partition, which belongs to the second HARD drive.
With short words, all options are open and it's just important to know what you want to do exactly. If I understand you right, you cannot boot OS preinstalled.
The problem is that after having playing with partitions, you will not be able to use the saved on the HARD drive recovery image. This score from GB 1.5 has nothing to do with the recovery image, and it is characteristic of Vista. If everything is OK, you can enter if you F * to start and choose the first option called fix my computer.
You can see this option after using F8 at startup?
I really don't understand why you have this error message when you start installation of WXP. What you can do is to set the default BIOS settings and try again.
If you order the Toshiba Recovery DVD, you will be able to reinstall the OS and have once again the factory settings. Maybe you should buy it. OK, it costs about 40 Euros, but this isn't a bad idea to have the original recovery DVD. Perhaps one day you want to use Vista or you want to sell your laptop. It's good if you can also offer original recovery with her media.
Sorry if I forgot to comment on something in your ad. If you have any questions please let me know.
Good luck!
-
Satellite L500-19th - Microphone stops working after a few words
Hello
About 2 weeks I have a new 19th L500 with Windows 7 and it worked fine. But since a few days I have trouble with my microphone, no matter if I use the internal or an external headset/mic. The question is it seems to work for a few seconds only, for example try a call via Skype, teamspeak etc. but people don't hear my Hello and a few more words, then they only hear me very well. The parameters of all them seem to be good and I already downloaded/installed the latest drivers realtek, but nothing is.
Anyone have an idea what can be the problem and how to fix it?
Thank you
stammannHello
Really strange, stammann. Have you also tried to update the driver for the webcam? I ask this question because the microphone is a part of the webcam, then you also need to update this driver. Just check the Toshiba page for an update:
http://EU.computers.Toshiba-Europe.com > support & downloads > download driversYou also enabled amp Microphone? You can check it in the audio settings of Windows.
-
Satellite P200 - Microphone has stopped working after installing Windows 7
My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
Any ideas anyone?I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.
Hey Buddy,
Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...
I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
http://EU.computers.Toshiba-Europe.comI put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.
-
The external speakers with bluetooth audio playback stops working after 20 minutes
I have a weird problem with bluetooth audio on my Acer Aspire 7600U. I have a bar of his JBL SB200 with support bluetooth and when I'm playing audio to it from my laptop (Sony Vaio) or my phone (Nokia Lumia) it works fine. But during audio playback of the IOA, the soundbar goes off after about 20 minutes in the middle of a song with such as Spotify. I suspect it's something different with the Aspire AIO bluetooth adapter which does not sound bar to stay on. No idea why? Does anyone else have this problem?
I have now solved. It's another computer, I had who took control of bluetooth speakers every now and then...
-
Satellite L350-262 - WLAN stopped working after Windows update
Hi - help please!
Everything was fine until an automatic update on windows 7 applied about 14/15 December 2010. After that I turned off the wireless LAN to save battery while off line, then the wire will not pass on, I am currently connected via a cable connection 10/100.
I tried a restore when this problem first occurred, and it worked. However, the updates have applied new themselevs and I cannot now restore the update that seems to have caused the problem before the date on which took place.
I updated the driver that the adapter is realtek adapter and I have applied this update - realtek_wlan_win7_20100702, it did not work.
I ran the diagnostics which indicates the following:-Please note the wireless switch on the before the computer is on, and shows on the page of diagnostic, Diagnostics tool recognizes also when the switch is off, so it doesn't seem to be a physical problem with the wireless LAN switch, but something software related that has disabled the wireless LAN
Network card diagnostics information:
Network adapter wireless network connection driver information:
Description...: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Reference of the manufacturer.... : Realtek Semiconductor Corp.
Provider of...: Microsoft
Version...: 6.1159.323.2009
INF file name... . : C:\Windows\INF\net8187bv32.inf
Date of the INF.... July 13, 2009 20:46:35
Name of the section.... : RTL8187B.ndi
Hardware... ID: usb\vid_0bda & pid_8198 & rev_0200
Instance... state flags: 0x180200a
Status code of Device Manager. . : 0
IfType...: 71
Type of physical support...: 9Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:Information for a diagnosis of connection
The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Interface type: Native WiFiConnection incident diagnosed
List of visible access points: 0 item (s) total, 0 article (s) poster
History of connection
Information for Auto Configuration ID 1
List of visible networks: 0 item (s) total, 0 article (s) poster
List of favorite networks: 0 item (s)
Diagnostic information (wireless connectivity)
Details on the diagnosis of wireless connectivity:For all the info on this session, see the event information of wireless connectivity.
Helper class: Auto-Configuration
Initialize status: successInformation for a diagnosis of connection
The GUID of the interface: 9b8b426b-4319-455b-86c5-f6b856e40456
Interface name: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
Interface type: Native WiFiResult of diagnosis: problem found
Root cause:
WiFi is disabledDetailed root cause:
Radio is off (SW switch)Repair option:
Turn on wireless capabilityNetwork Diagnostics log
File name: 3E316BFA-A7C3-496A-8FF9-810B3E247842. Diagnose.0.ETLCollection information
Computer name:
Windows Version: 6.1
Architecture: x 86
Time: Wednesday, December 29, 2010 08:56:08Anyone has any ideas I would be very grateful, thank you
Hello
as I remember, there was the user with the same question in this forum. I don't know if he could solve it... I recommend:
1 remove all WiFi drivers installed on your system and restart the round, then. Afterwards, go to the driver page and download wlan driver http://aps2.toshiba-tro.de/wlan/?page=downloads
2. If it still does not, restore to previous operating system -
Dell Vostro 1510 Audio has stopped working after the update of Windows Vista.
Nice day!
My computer (vostro 1510) began to revolt recently and I wonder if you could help me with this.
Basically, last week I was talking to my friend on Skype when suddenly my computer restarted due to the update of Windows (I have Windows Vista Business 32-bit). After he turned his back, I realized that there is no audio from the speakers. I tried using headphones but still - no sound.
Immediately, I went to the 'Sounds' menu and checked if my speakers were still 'active '. They have been.
Next thing I decided to do was to reinstall the Realtek audio driver, however, did not help or the other. Since then, I tried to reinstall several times but, unfortunately, everything remained the same.Then, I thought that maybe something was wrong with my hardware, however, audio spent ALL Dell diagnostics audio tests (so my hardware is very good, yes?). I also tried "System Restore" option and returned to the point before the update... Nothing has changed!
In addition, as far as I know, all the audio settings in Windows (checked in Registry Editor) are OK.
What should I do now? My last hope is to completely reinstall the system, however, I decided to contact you first.
Thanks in advance!
Solved the problem by reinstalling the operating system.
Thank you!
-
Satellite L750 - internal speaker stopped working after a few minutes of use
Hello
Sorry, but I had to use pastebin because when I want to post, the site send me '403 response Code '...
This is my problem:
https://pastebin.com/aaLdCxju
Does anyone have an idea on how to fix this?Any help would be appreciated
Satellite L750 - 1 H 3
Have you tried to ask for help on the forums of Linux?
-
Satellite L550 - Flash cards stopped working after Windows 7 64 bit repair
I tried to install/reinstall/uninstall and then install again, utility support Toshiba Value added Package and flash cards. No luck...
Utility of flash cards is installed: [https://dl.dropbox.com/u/3002908/Capture.PNG]
What now? :)Laptop model: L550-15F (PSLN4E)
In addition, nobody knows why the search for drivers for my model pack battery bluetooth but my model does not appear to have bluetooth? :)
Hello
Wait a minute, please! Order in which you have installed/reinstalled the Flash Cards Support utility and value added package? It would be interesting to know what you did exactly.
I used the following to this problem repair order:
I uninstalled the Flash Cards Support utility and then added value package. I did a restart and cleaned the system using CCleaner. A restart more and I installed the package value first and Flash then cards support utility. Now, I've done the last restart and the FN keys started working!It is important to install the new versions for Windows 7!
This means that cards Flash Utility version 1.63.0.4 and 1.2.34_64 version VAP Support. I founded both on the Web from Toshiba site :) -
Audio stopped working after update
I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM. The audio has stopped working after a few updates. Don't know which because he has many people who installed at the same time.
I tried to uninstall the audio driver then reinstall. I tried the shooters to boredom.
In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10). When I start the computer, I get a message that does not start the Realtek audio.
Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again. Thank you.
Hello
Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.
You can also check:
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
Why dell webcam is not a feature of troubleshooting? Is is just a piece of garbage that is thrown in to make believe that you get something of value? the audio has stopped working shortly after I bought it and there is nothing that I found to try to recover
Hi Susan,.
1. are you able to hear the system sounds?
2 are you facing any problem with Dell webcam?
3. What is the number of the model of the computer?
Method 1:
Run the hardware and devices Troubleshooter and check if that helps:
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
To resolve the problem with the sound, I suggest to refer to article and follow these steps:
If the problem is not resolved, please respond with more details.
-
Driver Realtek audio has stopped working on my Satellite A100
The Realtek audio driver I downloaded from this site for WinXp (V R 1.54) stopped working after an intervention apparently of another driver. The failure of any attempt to uninstall. This is a very stubborn driver and can t be eliminated completely from the computer. WinXp pro doesn't have a sound for this computer (Sat 100-787) driver and I can't reinstall the same driver. Yellow (i) continues to show in the Device Manager.
What can we do about this and is there a better driver for my computer?
As already mentioned in your thread at the beginning, you need to install the Microsoft service pack 2!
http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=102308#102308After installing SP2, you must upgrade the XP to the last State! Use the MS Update site! Very important are the fixes KB888111 and KB835221!
After the updated operating system you must install the latest audio driver from the Web to Realtek site, or from the Toshiba site!
Please note that you must also update the BIOS to the XP version if you use XP on this laptop Vista.A note: the A100-787 belongs to the series PSAANE; Choose the right drivers!
Maybe you are looking for
-
I forgot the restriction code, how to recover
I have pad, ios9.3.2. I forgot the restriction code. How to recover password restriction?
-
Incoming emails pop up with the raw code (mime)
Whenever a new email downloads, it appears in a new window, above all the existing windows, format mime. After 5 to 15 seconds, she disappears and everything is normal. Win 7, Thunderbird 24.4. Started about 2 weeks ago. Update: the problem seems to
-
The opening of the new tabs feature seems to be stuck. Please let me know how I can bring him back!
-
All of a sudden my Palm Desktop lost all it's data with the exception of the media (photos). There is no error message. In addition, it sync properly. Once again, there is no error messages. I tried to synchronize several times using my Palm TX a
-
Sansa Fuze is not recognized by my computer.
All of a sudden my computer does not recognize my Sansa Fuze. I tried automatic switching to other formats on the "rocket". What can I do else?