Satellite L500-1DT: cannot start webcam - 'initialization failed '.

Whenever I try to open my webcam it comes up with the message "initialization failed" and no other information.
Does anyone know how to fix this?

I'm not completely computer so simple instructions please!

[Thanks:]

Hello

First remove the software from the webcam installed in the system.
Then, visit the page of European driver of Toshiba and download software webcam for your laptop model.
Unzip the package, and then reinstall the webcam software.

Then restart the laptop and try again!

Tags: Toshiba

Similar Questions

  • Satellite C850-B991 cannot start - check Media [Fail]

    Hello

    I have a problem with my laptop C850-B991 Satellite, I can't start Windows and get the message "Check Media [Fail]" on a black screen, I can not also start for the installation of windows media, or install a new version of windows.

    How can I fix this please? I do not have the recovery media (DVD)

    For some reason your HARD drive is not accessible.
    You can enter the BIOS settings?

    If Yes, set it please to the default settings and try again.
    Check please if the HARD drive is recognized correctly in the BIOS settings.

  • Satellite L500-F19 is started due to failed HARD drive recovery process

    Hello

    I have a Toshiba Satellite L500-F19 and recently started having a bad performance in the GUI, and also began to close on its own.

    To try to solve the problem, I used the sistem of HARD drive recovery by pressing F8 in the boothing process.
    What is happening is that this process is not and and now my laptop does not even start!
    What can I do?

    I have a windows repair disc, but it was made only a few days ago and this pc is in my possetion for 3 years now.
    Is there a way I can recover my sistem in the original?

    Thank you
    João

    Yes, you can get it back to factory settings. You can only do so in a way: you must use the recovery DVDs. Have you created this disk?

    Please don t mix Windows repair disk and recovery disk. For now you can not repair anything. What you need to do is clean installation of image recovery.

  • Function key on Satellite L500-1dt - cannot activate WLan

    This problem started earlier today and I can't seem to find a way to solve it.

    When I use the FN key on the laptop to the feature menu will no longer appear so I cannot turn my wireless back on which is the only thing I use the menu functions for...

    Are there solutions to this problem or just a way to turn on my wireless without using the function menu?

    See you soon

    You need to update/reinstall utility package of added value and the Flash card support, then:

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    It will be better if you remove the previous installed Vap and utility of flashcard to your laptop support

  • Satellite L500-1ZC - cannot start HARD drive recovery menu

    I need to access the option "Get back to the default software factory with the data of the user", but I have problems at this stage.

    I tried power + 0 with no luck, even with the power + f12.
    When the boot menu appears, HDD Recovery is not there as an option to select.

    I need the exact option above but I have no idea how to get it. I have the option to select "Toshiba HDD Recovery" to the Startup Repair, but it will have this option if I go further in it?

    So far I have got up to the screen which warns of an unpacking of the partition system image but don't want to go any further in case this option is not there.

    Can anyone help? :/

    I have the option to select "Toshiba HDD Recovery" to the Startup Repair, but it will have this option if I go further in it?

    Toshiba HDD recovery redefines the laptop to factory settings! This means that your system partition will be deleted and you will get the same State HARD disc as on the first day of purchase.

    Therefore, you must save the date before you run the recovery process.

  • Webcam does not work on Satellite L500-1DT

    Recently got a Satellite L500-1DT for my mother who is learning to use a computer for the first time and everything works apart from the webcam integrated, that was a big part of the decision to purchase.

    The blue light comes on and it records sound but no pictures. Also, it does not take the photo or tour and in both cases just shows the image of cloudy sunset which seems to be a default turned on the program. I tried troubleshooting for her, but there is nothing in the help guide that tells you how to solve this problem, if it doesn't work.
    The software is already preloaded when it was purchased (we got it online) and I don't want to uninstall it because I don't think that we have a record.

    Can anyone help?

    Hey Buddy!

    I m not very good but in my opinion you should try to reinstall the driver for the webcam. Just check the Toshiba page for an update:
    http://EU.computers.Toshiba-Europe.com

    But before installing the latest version, first remove the old and reboot the laptop.

    Regarding the disc you want to say, as far as I know Toshiba laptop will not be delivered with the recovery disk. This means that you must create yourself using Toshiba Recovery Disk Creator. This disc contains an image on the factory settings. It is the same version that you have started the laptop, the first time.

    By the way: normally after the first boot, you should get a message of this type. Can you confirm this?

    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Satellite L500-1DT does not start

    Hello

    My laptop Satellite L500-1DT start it is placed in the Startup Repair process automatically look at a diagnostic and repair details that it says it cannot determine what the problem is.
    If I select advanced options, I am asked to choose a key board but then I get a message that says that you must login to access repair features and everything I can do then is to restart.

    If I press F8 and try safe mode I just get the same functionality of repair. I don't know what to do to proceed as the options take me to the same place. Any help would be appreciated
    Thank you

    When you press F8 at startup until you see the option to fix my computer?

    You created the recovery DVDs?

  • Satellite C650-1CR - webcam initialization failed

    Hi all

    I can't have the built-in webcam to start.
    I downloaded and installed the latest version of bios and drivers webcam on toshiba website which invited cam to start to initialize.

    Now I have an error that says 'webcam initialization failed, please check your device... ". »

    The problem is that there is no registration for the webcam on the screen of the Device Manager.
    I am at a loss how do I get the webcam to work, any suggestions?

    Billy

    > The problem is that there is no registration for the webcam on the screen of the Device Manager.
    Usually the webcam must be listed in the device under imaging devices Manager
    In my case it USB video peripheral s it is the Chicony usb webcam.

    You have marked unknown devices with yellow exclamation?
    If Yes, then this is probably the cam

    As a last option, you can try to recover the laptop using the Toshiba Recovery disk that you have created... If all goes well...

  • Satellite L500-1DT: HDD Recovery of Win 7 is stuck in an endless loop

    It's a so detailed bug report please bear with me.
    If you can help, or can confirm that you have had the same thing happen to you, I will be grateful.

    I've owned several Toshiba laptops before and I've even worked for Toshiba so worry, I like the machine. But I have a problem with his recovery software. I just bought a laptop Satellite L500-1DT with Windows 7 64 bit, on behalf of a non-techie who lives elsewhere. Since I know from experience that I have to sometimes panic calls from field in the sense of "it became too slow", "How do I get rid of the accumulated junk", "maybe he had a virus" and so on, the first thing I checked was ASR, which is how to bring the HD to "like new" condition.

    So I started out in the machine, replied to the questions until I got in the appropriate operating system, then led the program "make a recovery DVD. Double layer DVD checked ok. With the freshly made DVDs, I swapped the HD for a spare part, I had (much less: only 40 GB instead of 320) and started the rescue DVD hoping it would fix my own system to the blank disc.

    He did repartition the drive according to its schema, with more or less half the space for Windows and the other half for the data, including the recovery files. He did install the system in the Windows partition. It was then restarted in Windows 7 installed in order to complete the installation. There, the trouble began: an endless loop of reboots for hours until what I stopped it.

    Loop:
    * reset
    * black screen with bright logo 4 color windows «windows startup»
    * black screen with slight blade and "Setup prepares your computer for first use.
    * blue white screen "Welcome" with "please wait" and the crossbar with green blob, saying "the installation may take several minutes. Please do not interrupt or shut down the computer! »
    * blue screen saying it stops

    Repeat the above forever.

    I saw him restart way more than 10 times over several hours. And whenever he's faking, that this is the first time she did it. Of course, this is not normal!

    I tried to stop with ctrl-alt-del and the Task Manager, but the white screen would go even the Task Manager, making it difficult to kill any process or even inspect what they were on top. I stopped it by holding down the power button until it shuts. Then when it restarts it said that if I wanted safe mode. I tried. He went into the routine above and at one point he says that he could not proceed with the installation, if it was in safe mode. So he restarted in normal mode and then...! It is finally out of the endless loop!

    Then he asked me all the usual language, record etc., questions as he did the first time I had turned on him. This seemed good. Finally, I walked into a newly installed operating system and everything seemed fine, except that I found out later that some programs that were there before were not installed.
    With bravery bordering stupidity (*) I even Redid the procedure hard disk provided instead of my rescue: first I have nuked the windows partition, then I save the HD (with F8), not with the DVD that I had done. Result: similar rigmarole, with endless reboot.

    After that I stopped it, it kind-of-worked, as above, but now some programs were lacking, such as the Toshiba DVD drive.

    (*) motivated by: better try now with the computer here and all my tools and other computers ready at hand, that when the computer died at home of its owner, and that's the only thing left to try with me at the other end of a line call. Been there before.

    Now, that specific (DVD player), that I could download it from the support page and it installed fine. But what else might be missing or not working not that I have not noticed? The restore process is clearly not working as it should.

    I'm the first or only to whom it happens? I'm doing something wrong? Is there anything else I should try?

    I need to make sure that the restore procedure works perfectly while I still have the computer in my hands. If not, there is no chance that I'll be able to do a remote reinstall for my non-techie, once I asks me to clean the laptop by phone a few months from now.

    Thanks in advance

    [Update: just looking for the right place where I could post what I found that other people report the same problem.] This is definitely a bug in the software distributed for W7 - 64 overlay, not a problem isolated to my machine. See for example
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49421&TSTART=0 where the user kwarc described the same symptoms with a Satellite L505.

    Hello

    First of all, I must say that I could recover my trouble free unit.
    The installation of Win 7 went well and everything has been installed correctly.

    Back to you:
    To me it looks like something wrong with installation maybe some HARD drive partitions were confues perhaps, HARD drive should again formatted, and then run the recovery procedure.
    You should test

    Regarding the DVD player:
    As much as I know there is no DVD player for Win 7 64 bit. There are only available for Win 64 bit updated. If you need to install the DVD player for Win 7 32 bit version and then update using the patch released for Win7 64 bit.

  • Satellite L500 - 1DT Win7: Impossible to connect my mobile G600

    Hello

    I bought my ' Satellite L500-1DT "last week and am ready to throw it out the window.

    I swam to connect my samsung G600 mobile phone, I installed the software (samsung NEW pc studio) supplied with the phone.
    That, by then, installed, but when I tried to connect the phone, he said "an unregistered design has been connected, the communication cannot go forward, move looking for new device."

    I then downloaded a driver from the samsung website, but still no joy. I now have the "Samsung PC studio 3 installed, after uninstalling other software.
    Now the phone connected by USB is even not found, even if it is reloading. I also had problems to install my wireless printer and the software, but it is another matter!

    Aaaargh!

    And what Samsung say on it.
    I mean that Toshiba has nothing to with the device and Samsung support software.

    Are you sure s Toshiba USB port works correctly?

  • Satellite L500-1DT - HDD the smart predict service failures

    Hello

    I have a Satellite L500-1DT and the last days he started to say "your HARD drive has the smart predict function failures"-is that what I did for her or is it a problem to manufacturers? I only got two months.

    Anyone know if I can fix it myself?
    I have just in Spain and I'm here for the next two months.

    I'm useless with technology...

    Any help would be good.

    Thank you!!

    Kate

    Please don't fix anything alone. New notebook has warranty valid so if something goes wrong the affected parts must be replaced and warranty will cover all costs.

    Visit THIS page and read what means SMART.
    In other words, your HARD disk goes wrong so please back up all your important data and contact the nearest Toshiba service provider and ask for help.

    I don't know where you live in Spain, but to find the nearest Toshiba authorized maintainer visit the Toshiba support page under
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP contact them as soon as possible.

    Good luck!

  • Where buy/case plastic for broken Satellite L500-1dt

    Hi all

    I need to buy a new plastics/box for my broken Toshiba Satellite l500 - 1dt. An accident I broke it, the two - cover and plastic box where is the motherboard. Any idea whereI can buy new from? I'm living in London in the United Kingdom.

    You can see all the photos here: [http://img820.imageshack.us/i/ss851251.jpg/] [http://img413.imageshack.us/i/ss851250.jpg/] [http://img59.imageshack.us/i/ss851249.jpg/] [http://img686.imageshack.us/i/ss851248.jpg/]

    Hello

    The best place where you can buy a new plastic box is the service centre in your country:

    http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

    or on ebay if someone sells

  • Satellite L500-1DT - where to find the audio driver?

    Just reformat the laptop, went from windows 7 64 bit for windows 7 32 bit. Reformatted the disk that came with the laptop. I have no sound at all, the sound worked perfectly before and it keeps saying that I have no sound card. I tried to install the audio drivers but I can't find the right on the site with my model.

    I have a satellite L500-1DT with model PSLSOE.

    Tried to install the drivers available and I just get an application error after installation

    no idea how to fix it or where to find the correct drivers?

    Thank you

    Hey Buddy,

    To be honest I n don't know what problems you have with the driver audio but that's in the right place for all drivers:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
    Laptop > Satellite > Satellite L Series > Satellite L500 > PSLS0E

    But before installing the latest version, remove the current version first and clean the registry with CCleaner

    Check this box!

  • Satellite L500-1dt request product key

    Hello

    just got my new laptop Satellite L500 - 1dt T3000 4 GB
    However his now ask me the product key...

    Where can I find it please... as you can guess I'm new to all this tech stuff...

    Hello

    What?
    I put t understand why the windows serial key request
    I mean that the preinstalled operating system is already activated.

    Are you using the OS preinstalled Toshiba?

    Try to retrieve it using the HARD drive recovery procedure.
    You have to press F8, and then choose fix my computer, then select Toshiba HDD recovery.
    Then follow the instructions on the screen.

  • Re: Satellite L500 - 19 X - start the Webcam with Windows application

    I lost my webcam on the Desktop Application.

    Can I bring back by accessing the Web camera Application / Program (86) / Toshiba / Web camera Application and clicking on the Web Camera Application .exe. But it do not reappear when I boot. I have the Auto Run has ticked.

    My laptop is the Satellite L500 - 19 X, Windows 7
    Thanks for any help.

    Hey William,

    Normally in the webcam software you choose whether the application should be started with Windows or not.
    Did you check that?

    In addition, you should check it in msconfig (start > run > msconfig). There you can find a list of all the programs that start up with Windows. Make sure that the software of the webcam is not disabled.

    In the worst cases, you need to reinstall the software, but it only takes a few minutes. ;)

Maybe you are looking for

  • Sam P870/Win8 - not all the features of Gesture Touchpad Synaptic work

    Click n drag does not work for me... how about yourself?Simple finger don't scroll also no go... . How about you? Initially, it did not work with the synaptic driver from Toshiba... so I tried the last generic of Synaptics.He gave me more options but

  • Windows Defender will stop whenever I cut off the computer?

    I've had this problem for quite some time now, how implementation of windows Defender it won't give me the ability to save my settings, so whenever I turn on my computer on my Defender turns off also. When I turn on my computer it tells me that windo

  • All the PC Ports USB does not

    Before going away for the weekend, I turned off my PC and everything seemed fine. But after coming back, all the USB ports fail to read the devices. I ended up having to use chrome remote desktop and some luck to have access without a keyboard, but n

  • How can we save the value of next run

    Hi all I had the time of my project on JDE exccution. I want to disply this time, when I will carry this new as a 'last lead time. " Where can I store execution times, so here the blackberry databases? How can I do that please help me. Thanks in adva

  • How would you add sunglasses to a character from character animator

    I have a character and I would add sunglasses. It would be preferable to follow the sunglasses after with tracking of markers or can you add them to the elements of character in your psd file