Satellite L500 - backup operation failed

Similar Questions

• Satellite L500 - error in Windows backup

  Having a Satellite L500 Windows 7 32 bit. Windows backup on the external drive is not (LONGER) work. Message: Last backup failed. Error message 0 x 8007002.

  Can set the restore/recovery point and can back up restore/recovery points, but cannot save actively / data backup on the external units with Windows tools. Council of Toshiba to 'secure your laptop' does not work as well. If possible, do not restore the entire operating system.

  Thanks for your help.

  Hey,.

  To be honest, I doubt that this question has something to do with Toshiba

  Did you already check Google for links?
  http://igtfy.com/?q=Windows+backup+error+0x8007002

  I found an answer that cleaning the registry with CCleaner (or another program) worked him would be worth to try ;)

• Re: Failed to create of the media to restore Satellite L500-1XD

  I have a new Toshiba Satellite L500-1XD. I tried to create the support of recovery twice now and both times he failed on the first two discs with the following error;

  Cannot open the following file.
  E:\Boot\BCD
  (Error Code: F1-02013-00000000)

  I'm using the Toshiba Recovery Media Creator. The operating system is Windows 7 Home Premium 64-bit. I use standard DVD + R 4.7 GB discs.

  Any help would be useful.

  Thank you.

  > I use standard DVD + R 4.7 GB discs.

  I recommend you to use media of high quality like verbatim or Tdk. Voyez_ you, it can cause problems with weak brand, drives.

• Satellite L500 - failed to initialize webcam

  Webcam always worked... all of a sudden, it will not open and I get the message:
  + "failed to initialize the webcam." Please check your device and restart the application or computer. » +

  The device is what is installed on this Satellite L500 laptop.

  No indication on how I can check (diagnose) the camera

  Can someone tell me how I can check the camera, or its driver, or something else to make it work again?

  Your contribution is appreciated.

  PS: there is no indication below all if I'm going to be notified of responses. If moderators can report what it is a small consideration for those of us who are not technically minded.

  Hello

  I think you should first update / reinstall the driver for the webcam / software.
  You will get the webcam software / driver for Win 7 of the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  before you would be stars the webcam driver installation, I recommend you to uninstall the pre-installed software (Control Panel-> programs and features)
  Then restart the laptop and install the new downloaded drivers

• Operation failed. Validation of the backup task execution failed error message on startp

  Title: backup original validation task execution failed

  Receive message at next startup:

  Operation failed. Backup validation task execution failed. Description: Description of the scene see log operation for more details.

  I looked at the log of the operation and there were entries for each occurrence. Unable to determine anything else.

  Hi BobBianconi,

  (1) since when are you facing this problem?

  (2) what backup program do you use?

  It seems that you use non-Microsoft backup software. If this is true, you can check with the provider of software for known problems.

  The following steps can worth a try:

  Method 1: Run the fixit available in the link below for common system maintenance tasks.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  
  Note: Fixit would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of data loss from that particular area.

  
  Method 2: activate the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Satellite L500 - very slow operation

  Hello

  A Satellite L500 running Windows 7. It has suddenly slowed down, almost at a standstill. If I expose the computer for a few hours just on desktop it goes into mode "Eve" as expected.
  The problem is that he comes back to life very slowly, taking minutes for each order to be processed. I usually give up and try to shut down the computer, but which can take forever. I finally hold the power button to turn off. When I reboot, everything is OK.

  Some messages have emerged:
  waiting for CNQMSWCS. EX-close
  AMD:CCC - AEMC prevents windows to stop.

  Any help will be appreciated
  BW

  I assume that you have installed an additional application, which can be a troublemaker.
  Google say that CNQMSWCS.exe is a Menu Image quick view Canon and it is application of Canon.

  Please try to remove this app from the system and having it roll back OS asks to restore a few days using System. I hope that preinstalled OS will run again OK.

• Satellite L500-F19 is started due to failed HARD drive recovery process

  Hello

  I have a Toshiba Satellite L500-F19 and recently started having a bad performance in the GUI, and also began to close on its own.

  To try to solve the problem, I used the sistem of HARD drive recovery by pressing F8 in the boothing process.
  What is happening is that this process is not and and now my laptop does not even start!
  What can I do?

  I have a windows repair disc, but it was made only a few days ago and this pc is in my possetion for 3 years now.
  Is there a way I can recover my sistem in the original?

  Thank you
  João

  Yes, you can get it back to factory settings. You can only do so in a way: you must use the recovery DVDs. Have you created this disk?

  Please don t mix Windows repair disk and recovery disk. For now you can not repair anything. What you need to do is clean installation of image recovery.

• Satellite L500 - BSOD Identification of the Vista operating system

  Hello

  I have the Satellite L500 (PSLJ0A-01F013 (experiencing a BSOD (Stop: 0X000C1F5) what googling has identified as being a file corrupted on HARD drive.)) Unfortunately, the difficulty MS must be applied before the corruption. I tried many options, I can not force a recovery by using the 0 key to the power upward and virtually abandoned. I intend to install a new HARD drive and load it Vista again. My main question is, how to identify if the licensing system is 64-bit or 32-bit? The certificate of authenticity only identifies it as Home Premium OEMAct.

  If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?

  Thanks in advance

  > If I reinstall Vista, is there a way to create a Toshiba Recovery disk as soon as I got the laptop works to my satisfaction, that is to say with all the drivers and additional software loaded?
  If you install the clean version of Vista, you will not be able to create the Toshiba recovery disc.

  Only when the Toshiba recovery image is installed on your laptop, you can create this disk.

  What you can do now is to install Vista clean with all the necessary drivers, tools and utilities and some third party application to create the recovery image. Many people here have reported that the right application for the creation of recovery image is Acronis.

  You can also try to restore disc original order of Toshiba.

• Unable to run the operating system on Toshiba Satellite L500

  Hello
  I can't get my Toshiba Satellite L500 13D PSLJ3E to work. Here is the chronology:

  1. I brought with Win Vista, it worked great for about 6 months, but began to slow and I decided to change to Windows 7

  2. I installed Windows 7 using custom install (create new folder 'windows', not upgrading to Vista). Once more, it worked fine for about a month, but once more, he ran into trouble - indicating the version of Windows 7 the screen blue of death for 0.5 seconds, followed by a reboot.

  3. I've been searching the net and they said that the best way to get rid of the problem is to re - install. I did (after trying it several windows repairs), but yes, that's right, he's dead - before you start windows, it showed problems with Realtek Wireless.

  4. I had hope that this third time - will work her charm and re-re-installed W7 (each time using new installation).
  Once more time - does not work, but this time I can't even install - windows installer stops at about 60 percent of expansion records and wrote: difficulties with the media device. And after restart I can not find the Hard Drive(the BIOS shows only FDD and CD/DVD)

  Now I'm stuck here, the only way to start the windows is in Mode safe on my Wondows installed on point 3, but not all the time.
  Unfortunately, the first of my recovery DVDs cannot start and on top of that I can't get into the recovery partition by pressing 0 at first upward, but I see the recovery Partition when I go to the WIndows Installer.

  PS: I have problems with the high temperature of the laptop.
  Is it possible that HD goes out to safe the data thereon for overheating?

  Thanks in advance.

  > 4. I had hope that this third time - will work her charm and re-re-installed W7 (each time using new installation). Once more time - does not work, but this time I can't even install - windows installer stops at about 60 percent of expansion records and wrote: difficulties with the media device. And after restart I can not find the Hard Drive(the BIOS shows only FDD and CD/DVD)

  Do you mean that the HARD drive is not recognized by the BIOS?
  This would mean that the HARD disk is dead.
  This would explain the Windows installation problems
  I don't very well why the HARD drive died after a short period of use, but it turns out that HARD drive might die always head m accidents are not unusual and sooner or later would die each HARD drive

  However, I don't see a real solution that you need to replace the HARD drive
  If the laptop is under warranty, then you might ask a technician ASP replacement that should be done for free

  Good luck

• Satellite L500 - 19 X: install Win7 - stuck on syswow64 loop won't work?

  I tried to reinstall Windows 7 on Satellite L500-19 x, but he will not - do whenever I have start computer laptop a white screen pops up saying "preparation for installation... may take a few minutes" but it never goes away... can exit from this screen by starting the Task Manager and hit escape a few times.

  When get as far as office things seem to be in order with the exception of the running Syswow64/sysprep/...access command prompt is denied on the continuous loop, there is also a window saying 'TUPIT 2' which seems to have failed because there isn't "requested registry access is not allowed" in front of it.

  Would really appreciate if someone could tell me how to solve this problem, because it is extremely frustrating and seems to be so close yet so far to be successful!

  Hello

  This message is very strange. Read on the internet about similar problems, but the questions were always related to registry problems.
  In most cases, the error message appeared trying to repair the Windows operating system.

  Have you tried to do a clean install?
  I think you need to format the HDD first before you try to install Windows 7.
  I hope that everything would be erased from the HARD disk before starting the installation of configuration

• Satellite L500-22R - memory problem

  I tried to upgrade my Toshiba L500-22R memory up to 8 GB. I bought 2 x 4 GB Kingston SODIMM 12800 PC3L, the operating system does not start, I did a check of memory and it fails too. I tried with a Samsung 4 GB 12800 and it fails too.

  The original memory works well.

  Any ideas?

  TXT of CPU - Z report:
  CPU - Z version 1.72.0.x64

  Information for processors
  -
  Processor 1 ID = 0
  Number of cores 2 (max 8)
  Number of threads 4 (max. 16)
  Name Intel Core i5 430M
  Code-named Arrandale
  Specification Intel (r) Core i5 CPU M 430 2.27 GHz
  Package (platform ID) Socket 989 rPGA (0x4)
  CPUID 6.5.2
  CPUID long 6.25
  Core Stepping C2
  The 32nm process technology
  TDP limit 25.0 Watts
  Basic speed 1187,2 MHz
  Multiplier x Bus 9.0 x 131.9 MHz speed
  2374,3 MHz rated Bus speed
  Stock frequency 2266 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T
  Data L1 cache 2 x 32 KB, size 8-way line set associative, 64 bytes
  L1 instruction cache 2 x 32 KB, size 4-way set associative line, 64 bytes
  L2 cache 2 x 256 KB, size 8-way line set associative, 64 bytes
  Cache 3 MB L3, size 12 channels line set associative, 64 bytes
  FID/VID control Yes

  Chipset
  -
  Northbridge Intel Havendale/Clarkdale Host Bridge Rev 02
  Southbridge Intel HM55 Rev. 05
  Graphics interface PCI-Express
  Width link PCI-E x 16
  PCI-E Max Link width x 16
  Type of DDR3 memory
  Memory size 4 GB
  Double channels (symmetrical)
  Memory frequency 527,6 MHz (04:16)
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Time to Row Refresh Cycle (tRFC) 60
  Control rate (CR) 1 t
  Base address e/s MCHBAR 0x0FED10000
  E/s MCHBAR size 4096

  Memory SPD
  -
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B6F
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  DIMM # 2
  SMBus address 0 x 52
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE000000000000000000)
  Size 2048 MB
  Bandwidth Max PC3-8500F (533 MHz)
  M471B5673FH0-CF8 part number
  Serial number 62B15B87
  Date 12/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  AMP no

  Model of card mother NSWAA (0x0000017A - 0 x 00035690)

  DMI
  -

  DMI BIOS
  seller TOSHIBA
  version 2.10
  day 05/17/11
  ROM size 2048 KB

  System DMI information
  Manufacturer TOSHIBA
  product Satellite L500
  version PSLS9E-02Q01TCE
  series 3A747581K
  UUID {9ED22C15-2032-DF11-B751-705AB6880D1F}

  DMI Baseboard
  seller TOSHIBA
  model NSWAA
  Revision 1.00
  series 123456789AB

  Of course, you bought not compatible modules.
  PC3 12800 1600 Mhz isn't listed as a module support.

  Satellite L500 can scale up to 8 GB of RAM and you can use two modules MHz (PC3-8500) 4 GB DDR3 SO-DIMM 1066.

• How to install Windows XP Home on my Satellite L500-1ZP?

  I formatted my Satellite L500-1ZP (PSLS9E) and thought DLI install win xp instead of win7 (do not have the disk/partition backup)
  now, when I start it with the cd of windows XP blue screen 'windows setup' inside start but when its finished loading, it gives me an error code:
  ' * STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000).

  I read somewhere that I need to download SATA drivers for my laptop and do a disc to install windows xp with the SATA drivers on it?

  I tried to get these drivers, but I don't know that I have need and how to do the installation disc
  I copy my original windows XP Home cd and put the drivers in a folder somewhere on the disk?

  I hope someone can resolve my problem because the laptop is just over a year, and I don't really want to buy a new...

  I just hope that you created the recovery DVDs until you started to install own OS. After clean operating system installation you not longer have access to data recovery.

  You are right. For the installation of Windows XP Home edition, you need SATA driver. How to install Windows XP Home edition on the new laptop models that you can read on http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

  In the end, I must say that your last sentence is pretty confusing to me. You bought the laptop designed for Win7 and you want to use the old WXP on this. Do you really think you need to buy the new laptop if you want to install Windows XP Home edition?

• Satellite L500-13D: all programs & settings are gone after upgrade to Windows 7

  Hello.

  My laptop is Satellite L500-13D

  I've upgraded to WINT in VISTA using official TSB upgrade disk.
  It seems that something was wrong. Win7 installed properly, but unfortunately all installed programs and settings are gone.
  I see also that when the upgrade $directories on C: and E partitions have been created; programs and older files are there.

  A few questions:

  1. is there a way to return return programs?
  2. how to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  3. download TOSHIBA RECOVERY CREATOR?

  Hi mate

  Have you read the manual that came with the laptop and Windows 7 upgrade disc?

  After an upgrade to Windows 7 you need additional disk with the upgrade tools that came with the Windows 7 upgrade disk.

  > 2. How to create the recovery disks now under WIN7, because there is no CREATOR of TOSHIBA RECOVERY more?
  This is not possible because the recovery disk must be created at first running the operating system preinstalled by Toshiba.

  > 3. Download TOSHIBA RECOVERY CREATOR?
  If I know that cannot be downloaded.

• Satellite L500 - battery won't charge

  Hello

  I had a problem last week - my laptop (Satellite L500) works well on alternating current, but the icon shows "plugged in, not load ' and the battery charge is at 0%. So if I remove the outgoing cable it runs immediately. Lighting load LED on the front of the battery is not more.

  Laptop is a little more than two years, but works well, everything original Toshiba (battery and charger). I had noticed recently that the battery life was not what it was when lappy was new, but it lasted at least 45 minutes or more, so I knew the battery was endangered, but it is hard to believe it's just failed when two weeks ago could load and run OK?

  Any ideas?

  See you soon,.
  Rebecca

  > so I knew the battery was on the exit door but find it's hard to think he's just failed when two weeks ago could load and run OK?

  I think that nothing is impossible, that it means that the battery could be defective.
  Of course, it is my personal opinion, but I see only two possibilities: either its battery problem or motherboard problem.

  So if I was you, I would check if the problem persists with a new battery tested.

  By the way: you can also view this short work around:
  -disconenct the battery and ac adptor
  -Press the button power (30-40 seconds long)
  -connect the battery and AC adapter and turn on the device
  -to check if the battery can be charged.

• Update BIOS bricked Satellite L500 - 19 X

  Hello

  I was reorganize laptop for my nephew (Satellite L500-19 X PSLS0E-00F01DEN part number), store files etc, exceptional application updates etc and foolishly accepted utility offers the Toshiba to upgrade the BIOS that froze completely part thru (in step 11 of 37 IIRC).

  I now nothing more than a black screen.

  I have a few it skills, I have looked around and would go down to the WINCRIS. Road EXE create a bootable USB key to recover in this way.

  However, the last BIOS for this laptop seems to be a .exe file, not a zip file where I could extract the boot rom.

  Guess who I still have the ability to take the reader from the laptop to try to recover the bios backup file update utility says it recorded on another machine you use to try to decrease that way, but I'd be grateful any advice - or even a bootable image - anyone could offer.

  Guess I'm hoping for too many feel Toshiba could provide such an image...

  Thank you

  > However, the last BIOS for this laptop seems to be a .exe file, not a zip file where I could extract the boot rom.

  The exe file isn t real exe file but it s a package.
  You can extract this exe by right-clicking and choosing extract here

  I use WinRAR to extract the package. Also, WinZip or 7Zip should work.

  But to be honest I m not very good if you want to be able to solve this problem.
  To my knowledge a crisis of the BIOS disk would need to reflash the EPROM module and generally, this can be done by maintainer authorized Toshiba

  However, please keep us updated.