Satellite L500 - I can't see integrated Intel HD Graphics in Core i3 - 330 M

Similar Questions

• Satellite L500-1UU - can not see the FN on Windows 7 64 bit cards

  Hello

  Although the FN buttons work, when I bought this computer firstly I was to see a Panel and watch of the operations of the forces NOUVELLES. However, now I don't see this Panel when I push the FN key. I put t know what happen and how can I solve this problem. I uninstalled vap and installed again.

  Can someone help me?

  Hello

  try to install the utility of technical support of Flashcard [drivers Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] you can also try to restart flashcard support in the utility folder of Toshiba (go start-Toshiba utility)

  Post edited by: Jeka-HE

• Satellite L500 - 1 7 cannot install the Intel graphics driver

  I can't install drivers for my graphics card on my computer. It's a satellite L500 - 1 7.
  You can see his Setup here:
  Manufacturer: Intel
  model: Mobile Intel GMA 4500 M

  On the site of the intel, they said download the drivers on the toshiba Web site but here does not install the drivers.
  During the installation a message saying:

  «This system does not have the minimum system requirements make the installation of the software.» The installation program will stop. »

  I was able traduct by 'the system has not requiered minimum configuration for the installation of the program. The game program will stop.
  I have download this driver:
  12/02/09
  Chip Set Utility
  Intel Windows 7-64 bits 9.1.1.1019 World Wide

  I'm sure it's good drivers, so what could I do to be able to install this driver I need?

  Sorry for my bad English!

  In General, it is always recommended to use the Toshiba drivers only. Toshiba drivers are tested and adapted to work with graphics placed in the laptop. There are also some overheating protection mechanism and damage graphics card.

  If you check this forum, you will find many users with the same problem. manufacturers of graphics cards write on the pages of own download for portable computers, it is strictly recommended to use the drivers from the laptop manufacturer.

  I think that you think that is good driver, but do you also think that s Toshiba driver is not good or not good enough?

• Satellite L500-1GK - can I change the graphics card?

  HEY! I need help

  I'm a graphic designer and use Satellite L500-1GK. I found that the VGA is not good enough. The resolution is not really good enough for a designer

  Manufacturer of the graphics card: Intel®
  type: Mobile Intel® GMA 4500 M
  memory: available total graphics memory can be up to 1 340 MB with 3 GB of memory and 32-bit operating system system or 1 759 MB with a 64 - bit OS system memory and 4 GB
  memory type: shared

  Is that what I can do to get the best resolution? Whatever he rib that I am able to change the VGA? is there a solution with that can you help me?

  Hello

  Unfortunately it is not possible to change the graphics card. It s fixed/soldered on the motherboard and can't be exchanged. Sorry, but it is not possible to s.

  But if you only need a better resolution of the screen, you can connect an external monitor. Here, you can work with a higher resolution if your monitor supports it.

• Satellite L500-1DT: can't play Grand Theft Auto because of the graphics card driver

  I use my laptop for a number of games.
  I just downloaded GTA4 but can't play.
  I get a understood to "re - install DirectX and/or insert the latest video card driver.
  I reinstalled DirectX, but I'm not sure of the video card.

  Any ideas what driver I need?

  Hi mate

  This unit supports the Mobile Intel GL40 graphics card.
  The latest graphics card driver can be downloaded from the Intel page.
  See the Intel Web site.

  The installation of the graphics card must be made in the Device Manager.
  Here, you use the Advanced installation procedure which allows to point to the driver files downloaded from the Intel page.

• Satellite A200 - I can't see battery time remaining single percentage

  Hello

  I had a Satellite A200 on Vista and XP, and I'm NOT able to see the remaining estimated battery time. I see only the percentage left.

  For example, I use my laptop unplugged for over an hour (my comments) and I can only see the percentage left (45%), but I can't see the time remaining.

  I have a problem with Vista or XP.

  Is - this natural? What can I do to see the time remaining?

  Thank you

  Diego Alvares
  Brazil

  Sorry, but I would like to know why you think that this is a problem. Where you found information that it must be demonstrated to remaining battery time?

• Satellite L20-101: can't see my WLan access point

  Hello world

  I have a L20-101. It worked well until we change our AP with 802n Apple AP again. I can see any other network, but I can't see mine.
  Any idea?

  Thank you

  Hello

  Yes, I have an idea ;) How about you change the WLan card?
  Seems that the new access point is not compatible with the wireless network for laptop card.
  Maybe the minPCI wireless network card does not support the standard wireless access point.

  What do you think?

• I can go back to Intel HD graphics after removing the graphic card Nvidea GT 620?

  Hello

  Lets say, I have installed the GT620 Nvidea graphics card for my PC, PC graphic is now set by default for this card. If I don't like it and I take my PC card, PC automaticaaly will increase from the original Intel HD graphics? What I have to do a reset or re install drivers Intel?

  Thank you

  Low

  Hello

  You unplug the external graphics card from the computer, the default computer starts using the integrated graphics card. There is no need to install the video drivers. However if you encounter a problem, you can reset BIOS to factory default so that you can update the video drivers from the Web site.

  www.support.Dell.com

  In case you need assistance please do not hesitate to respond with the number of system model and operating system.

  I'm happy to be your assistance.

  Thank you & best regards
  Kaushal P
  #iworkfordell

• Can't see much text or graphics

  I am running Windows XP and in Office 2003, I can't see the colors and that part of the screen is visible.  When I go online on a Web site, the button send is not visible but it is there, a lot of the text and graphics are not displayed.  What is going on?

  You can follow the instructions below to update a video driver or any driver in Device Manager.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you

  Marilyn

• Can't see integrating ERP in the workspace

  Hello
  
  I installed and apparently correctly configured integrator of ERP on 11.1.1.3, Windows 2003 R2. Now when I goto workspace-> Browse-> administer I see not the ERP Integrator. Remember I don't have ODI, installed (for various reasons) on this machine. What is the cause of the problem? I am aware that until I configured ODI I can't really use ERPi, but I just wanted to check.
  
  Also when I goto the following link: http://machiney:6550/aif/faces/setup/Main.jsp, I get a message saying that I am not allowed to access this page. I am logged in as administrator.
  
  Moreover, I restart the services and I also tried to restart the server. Did not work.
  
  Any guidance will be appreciated.
  
  Published by: EssbaseApprentice on December 31, 2010 19:01

  Hello EssbaseApprentice,

  Any product that is either installed/configured/deployed through EMP Configurator AFTER the workspace has been deployed will not appear within the workspace. It is body configuration of the workspace stores static content in a. The Application layer XML file and is not dynamically pushed. You will need to redeply workspace for all changes reflected and demonstrated.

  Also you can't go directly to most products from v11.1.1.3.00 they will charge the SharedServices SSO token to process because most of the products will not have a direct login page in the future. Workspace will be a requirement.

  Thank you

• Re: My Satellite L500-1XC can't find wireless networks

  My computer can not find wireless networks more and that's because drivers. I downloaded one I thought was mine from this page https://aps.toshiba-tro.de/wlan/?page=downloads, but the download link is no longer active :(

  I am able to select Wireless as a connection, but he does not see anything and my wifi works entirely 100% so any help would be great guys :) Thank you

  I agree with Timox: you need WLan 802.11bgn Realtek RTL8191SE Wlan card driver.
  Download driver Toshiba WLan portal should functions since I managed to download the driver of the page package.

  Alternatively, you can download the driver directly from the Realtek page: [RTL8191SE-VA2 | http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

• Satellite P500 - 14L - can not see the mouse when you play the game

  I use P500 - 14L, the graphics card is NVIDIA GeForce GT 330 M with CUDA technology. Unfortunately, when I play C & C 4 game, I do not yet see my mouse cursor.

  Did anyone had this problem before? How can I sort?

  Hi vincentcky,

  This only happens on C & C4 game or with other games too?

  You should look for a patch for this game. You can find it on the site of the factory.
  Additionally, make sure that the latest version of DirectX is installed.

  Last but not least, it would be interesting to know what operating system you have.

• Satellite P200-14O: can't see my own WLAN

  Hi all

  Today, I had a problem with my WiFi Atheros card. I have toshiba Satelite P200-14O. The problem is very stupid and extremely boring.

  I can see all the net wireless around me, but my net oun I don't see. I can connect to all other networks, but I can't connect to my own.

  I ask a friend to come to my hom with her laptop and it was no problem to see my SSID and connect. Very stupid, but I'm extremely nervous. I check all the settings to my access point and everything seems ok. If I use my cell phone I can see and can connect to the network.

  I don't really know what to do

  Help, please!
  Ivan

  May I ask what Wlan standard using your router?

  Just for example.
  If your laptop uses only 802.11 G standard and the router would receive only Wlan 802.11 B signals should not be able to see your SSID then you should not be able to connect to the WLan router

• Satellite L500 - where can I get the clip of restraint for the keyboard?

  Hello!

  A few weeks back, I bought a L500/00U, brilliant.

  Only problem so far, last night one of the clips of restraint on the broken keyboard. It was the SHIFT key that originally broke out, but because I use a lot the SHIFT key, I swapped retiner clips with the key on the keyboard.

  Anyway, my question is, how do I acquire a new retainer clip, I really like to avoid to return the laptop to the store, only just got all my software after a clean install of Windows 7 Ultimate RTM x 64.

  Thanks in advance.

  If the keyboard or else be replaced, why you think you lose something of the HARD drive?
  If technicians share the keyboard it has nothing to do with the OS preloaded with.
  Only the features will be tested and that s it.

  OS should not be installed again.
  Contact the nearest Toshiba authorized service in your country, explain the situation and they will help you in this regard.

• Satellite L500-19F: can I use driver AMD Radeon Catalyst 13.1?

  On site Web AMD support for this Information on the AMD Catalyst 13.1 software suite:

  The following books are not compatible with this version:
  Toshiba laptops (please contact the laptop OEM for support of the drivers for these laptops)

  Nevertheless can use the Version?

  When the update Toshiba come from?

  Thanks for any answer!
  Chris

  > Can nevertheless use the Version?
  You can install it, but the use is at your own risk.
  To my knowledge the Toshiba drivers are changed and designed for mobile use.

  > When the update Toshiba comes?
  I noticed that Toshiba release new models of laptops very often and drivers that will come out of this new series. So in the case of the new laptop model uses the same series of ATI graphics, you can use the same driver.