Satellite L500 - no wireless after installing Win7

After you perform a clean installation of Windows 7 Professional 32 to my laptop Satellite L 500, I realized that I do not see my wireless network.
When I click in "open network and sharing center", I see the message that "the map is not connected.
By clicking under the heading "network adapters" and Device Manager I see "intel WiFi link 5100 AGN. If I decide to uninstall it and reinstall it under another driver, windows always recognizes as wifi link 5100 agn.
What should I do to get my wifi working?

Thank you all for your time

Wireless network card is enabled?
Move the WLAN switch in position ONE and use the FN + F8 key combination.

Tags: Toshiba

Similar Questions

  • Satellite A660 - slow start after installing Win7

    I have an A660. Satellite (model aus)

    I installed the 64 bit version of windows 7 and starting to take more than a minute. I was wonderign if I used a retail drive and used the serial number at the back of the computer laptop would it not be a better facility.
    Then, I would install just the stuff I need.

    Also, so I use a commercial version would drive recovery based HARD stop working? (because the commercial version may overweite some entries written in the section the drive boot HARD-now if I press 0 he goes to setup - if rerail version replaces this function would stop working?)

    Thanks heaps.

    Each Toshiba laptop comes with the Toshiba recovery image. This recovery image contains several specific Toshiba and utility tools that begin with OS and also some additional software.

    What you need now is the right configuration. With other words, you can remove the unnecessary software from the system and stop all applications, you need the startup list t.
    How to do this?
    Press WIN + R > write msconfig and confirm with OK. The system configuration will be open. Go to the Startup tab and clear the check box in front of app you n t need initially to the top.

    Of course, you can install a clean version of the OS, but for product activation, you can use the product key from the sticker. This license is for the version of Windows that you have with your laptop.
    HDD recovery works with the factory only settings. When you install the clean operating system, you will not be able to start. What you need to do is to create recovery DVDs after Toshiba s instruction how to do this.

    If you have any other questions please let us know.

  • Satellite A500 - unknown device after installing Win7

    Hello

    I just installed Windows 7 64 bit in my laptop Toshiba Satellite A500-132 and in Device Manager its saying that there is no unknown device ACPI\ENE0200. Do you know what drivers should I install?

    And the second problem is that when I installed the pack value there is usually a red light that shines through the headphone jack, but when I installed the audio driver of light disappeared and doesn t shine more.

    Y at - it a fix for this?

    Hello

    I agree with the user above. This sounds like the CIR port and you need to download this driver.

    But I a bit confused about the light in the headphone jack of Mr. are you sure that there's a light or you can post a photo for example?

  • Satellite L500 - 13D - from Vista to Win7 - HOW?

    I bought yesterday laptop (Satellite L500 - 13D).
    I installed Vista 64 bit and I want to upgrade to Windows 7, because it is no longer compatible
    with all the other programs on my old PC (I used XP).

    Do I need special drivers for this and where can I get them?
    And applications of Toshiba and software will work correctly?

    Thank you

    Hello

    I recommend the clean install!
    This means that you should boot from the Windows 7 DVD and should install it instead of Vista.
    You can format the entire HARD drive!

    But please create the recovery disk first. This could be useful if you want to roll back to Vista in the future

    Windows 7 drivers should be published on the European driver Toshiba page.
    If you will not find the drivers at this time, then you should take a look in the next few days
    I noticed that Toshiba releases the pilots every day for different models.

  • FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BE)

    FN + b keys do not work after installing Win7 Ultimate (HP Envy 14 BEING) - not able to use the Beats speakers. The software updates that I have to install?

    Hi Jim,.

    Open windows control panel, click the drop-down list box "view by" at the top right of the window and select "large icons" - you see an entry for Beats Audio in the list and if you do, it's actually launched if clicked?

    Kind regards

    DP - K

  • After the installation of my Satellite L500 OS version is installed

    I installed pre my laptop Satellite L500 with Windows Home Premium 64 - bit for the first time and after installation Windows 32-bit!

    Why became 32-bit and how to put it back again to 64-bit?

    Can you please post model mobile exact?
    Did you install OS using recovery delivered DVDs or what?

    Some models of laptops are available with pre-installed 64 bit and additional 32 bit version on DVD.
    Please post the exact model name and model number so that we can check it out.

  • Satellite A500 - sounds/images of default system lost after installing Win7

    Hello

    I bought a Toshiba Satellite A500 with Windows Vista and upgrade to Windows 7. After my installation of Windows 7, I lost all my icons of Toshiba and sounds, as silent image appears so hitting the button mute on the keyboard and the beep on hitting the sound up/down button.

    Before installing, I took a backup of a file from Toshiba and tried to install apps from Toshiba in the TOSHIBA\TOSAPINS folder there. But still not get the default values of the system.

    Would be very grateful if someone could help me to restore those back.

    See you soon,.
    Vikram.

    Hello

    I assume you mean on the menu that appears with the FN keys

    Usually after installing Win 7, you must reinstall the VAP (value added package) and utility Support Flash Cards in order to get the keys FN working again.
    You can download the two page from Toshiba Europe tools.

    I m not very good if you get the same sound that was available under Vista as Win 7 takes care of the own system alerts/sounds.

    But after the installation of VAP and Flash Cards Support utility, you should see the images that appear with the FN keys.

  • Satellite U300-14Z - no sound after installing WIn7

    Hello!
    I have the problem (series Satellite PSU30E) next: laptop computer was Windows XP, who suddenly "fallen" and again once it has not issued (as explained by problem SATA drivers). I installed Windows 7 64 bit, but after installing it turned out that the * Device Manager has no audio device *. I reinstalled the system, is now a Windows7 Ultimate x 86 license.

    All options work, but the sound did not always appear. Installing the drivers doesn't help - * OS still does not see a sound card *. What could be the tools to solve the problem?

    Hi whooz,.

    Is that what you have already installed the audio driver from Toshiba Web site? As far as I know Satellite U300 supports Windows 7 32 bit then an audio driver should be listed and works because readers are pre-tested by Toshiba.

    But it is also important that you install the chipset driver and should be installed first. So start with installing the audio driver.

    Also, try to load the default settings in the BIOS.

  • Satellite A300 - 9 pm - no reaction after installing Win7 cooling fan

    After Installing Win 7 on this CPU fan stop turning at all.

    Thus, when usage intensive pc shuts off due to the weather.

    I've been try bios update didn't etc no efect.

    Any idea?

    Hello

    It's very strange.
    Have you tried to reinstall Windows 7 again?
    I recommend you to repeat the installation of the OS!

    After installing Windows 7, you must install all the driver Win 7 and tools such as value-added package that is essential for Win 7

    Last but not least go to BIOS (F2) and set it to default settings!
    Save the changes and exit the BIOS

  • Satellite C660 - white screen after instalation image recovery

    Strange problem. My Satellite C660D-1FM was a bunch of updates from Microsoft (did not updates for centuries as it was used by my daughter and not connected to the internet) and after completing it restarted and I got the Toshiba splash screen and nothing. Holding F8 gives the same problem, tried turning the key '0' and that was the same. Connected to an external monitor and it's the same thing. I can't get into the BIOS and everything seems fine.

    Then, thinking that the HDD is maybe defective I mounted another drive hard and fully installed Win7 on a Microsoft DVD (SP1 and all updates) and everything works. Then, I thought I try and restore the laptop to factory settings by default using Toshiba DVD recovery which Id created. Worked well during the installation, all the installed DVD 3 and he's gone through the procedure installation, portable got at the end when he tried to restart it, rebooted and now back to the same error - Toshiba start screen is ok, but then he'll just empty. To convince me that I wasn't going crazy I then reinstalled Win7 my DVD of Microsoft and he moved very well, did all the updates and worked all day today with no problem.

    Someone at - it an idea of what's going on?

    Hmmm... something like that shouldn't happen.
    Do you use the recovery disc for the first time?
    Have you noticed the same result on both hard drives?

    Problem is that there is not much to do about it and there is no way to change it either in recovery installation runs, or later during the installation of windows is underway.

    Try to set the BIOS to default settings and simply try to reinstall the recovery image.

  • Satellite L500 - keyboard idle after the mode 'sleep'

    Satellite L500, Windows 7, keyboard become idle after waking up from his sleep. Restarting solves the problem.

    Help would be welcome please!

    Hey William,

    That s odd, but in my opinion you should try a BIOS update. BIOS version latest for your laptop, you can download from the Toshiba page:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

    But let me give you a little advice: update of the BIOS is always a bit risky so make sure that you are logged on as administrator. In addition, extract all the files from zip archive and close all programs running (also AntiVirus).

    By the way: you use pre-installed Windows 7 in Toshiba or did you do your own installation of Windows?

  • Satellite L500 - 1 7 cannot install the Intel graphics driver

    I can't install drivers for my graphics card on my computer. It's a satellite L500 - 1 7.
    You can see his Setup here:
    Manufacturer: Intel
    model: Mobile Intel GMA 4500 M

    On the site of the intel, they said download the drivers on the toshiba Web site but here does not install the drivers.
    During the installation a message saying:

    «This system does not have the minimum system requirements make the installation of the software.» The installation program will stop. »

    I was able traduct by 'the system has not requiered minimum configuration for the installation of the program. The game program will stop.
    I have download this driver:
    12/02/09
    Chip Set Utility
    Intel Windows 7-64 bits 9.1.1.1019 World Wide

    I'm sure it's good drivers, so what could I do to be able to install this driver I need?

    Sorry for my bad English!

    In General, it is always recommended to use the Toshiba drivers only. Toshiba drivers are tested and adapted to work with graphics placed in the laptop. There are also some overheating protection mechanism and damage graphics card.

    If you check this forum, you will find many users with the same problem. manufacturers of graphics cards write on the pages of own download for portable computers, it is strictly recommended to use the drivers from the laptop manufacturer.

    I think that you think that is good driver, but do you also think that s Toshiba driver is not good or not good enough?

  • Satellite L500 - lost wireless connection

    My Satellite L500 recently lost the wireless connection. I looked towards the top of the Realtek wireless device in Device Manager and it says that the device is functioning properly. I tried to use "ping 192.168.1.1" join the router, and I get "error Transmit - general failure."

    Any ideas?

    Hey Buddy,

    And now Windows recognize some WIFI networks at your fingertips? Your validation lost wireless connection isn't very useful

    You should try a WLAN driver update that you can download from the official page of Toshiba:
    http://APS2.toshiba-tro.de/WLAN/

    If you can't find or connect to WLAN networks deactivate in the Windows of the WLAN power save mode power profiles. You will need to set for maximum performance.

  • WIFI does not work after installing WIN7 to HP Pavilion DV1000

    I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)

    Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...

    Hi, Andreas:

    Here's what you need to do to get this old Intel Pro 2200 card to work with W7...

    Download the zip version of the driver from the link below.  The first file listed.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=15798&lang=eng&OSVersion=Windows%20Vista%2032 * & DownloadType =

    Unzip it into a folder.

    Go to Device Manager and click on the network controller needing drivers.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.

    Make sure that the include subfolders is selected and the driver should install.

  • Features of HDX18t not recognized after installing Win7

    After a clean install of Windows 7 Ultimate, Device Manager reports three devices Base system without driver and two unknown devices (ACPI\ENE0100 * ENE0100) and (USB\VID_138A & PID_0001 & REV_0372 USB\VID_138A & PID_0001).

    As far as I know, all the USB ports work correctly, as does everything that I tested (some ports that I don't use).  I assume that ACPI has something to do with power management, but I can't find any other indications of power problems - well that I had to replace the battery not long before installing Win7 because it was not supported.

    What are these five devices, and how can I find the drivers - especially for the three who seem not to identify?

    I tried to use the tool "automatically find your products and solutions ', but it does not load in the latest version of SeaMonkey, and with IE9, it seems to start but shows no progress after more than an hour.

    Any suggestions?

    Hello:

    This is the base system device.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76497-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    The first unknown device that you posted that needs of pilots is that one.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-66577-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    The second unknown device what you have listed is this one.

    http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-67648-1&CC=US&DLC=en&LC=en&os=4063&Product=3769214&sw_lang=

    Paul

Maybe you are looking for

  • Qosmio G10 - capture using WinDVD Creator

    I'm unable to capture video using the s-video input and WinDVD Creator - I have connected my camcorder to the s-video port, but WinDVD Creator recognizes that nothing is played. Several users have advised by clicking on the icon key after running Win

  • HP Officejet 4630: Printing on one or both faces

    I have a HP printer 4630 all-in-one and I can't seem to find the setting to turn off the double-sided printing so I can print on one side. With it, I use a new Mac laptop with OS of Yosemite and a new version of Microsoft Word.  When I go to print, i

  • setting puts wifi maken

    Naam van mijn our internettoegang staat niet meer between het rijtje put netwerkverbindingen back. F12-Toets (stralings-/ zendmastje) geeft aan: Wi - fi: setting verbroken. Hoe kan ik mijn our price weer recovering?

  • Upgrading or adding SSDS to urge m6 - 1158 ca

    Hello I have a HP Envy m6 - 1158ca I use of the last two years and really happy with that. Is it possible to add SSD on it with the existing 1 TB HDD? If it is possible, then can you please send me the guide to do this? I'm also going to increase the

  • Build in-circuit debugging mode, but build in release mode fails.

    (crosspostes of https://developer.blackberry.com/html5/documentation/v2_2/build_and_sign_your_app.html#comment-17767... suite application to do here) In "%HOMEPATH%\AppData\Local\Research In Motion" I can see:bbidtoken. CSK(downloaded using my ID sta