Satellite L510 - mouse WLan late when you're connected Dynadock

Similar Questions

• WLAN speed when you are connected to the internet

  I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is.

  I connect to the internet via ADSL.

  Both computers are connected to the router, we have a connection cable, other is connected wireless.

  If I'm not connected to the internet, I can transfer files between them through 1.5MB/s-2MB/s. But, if I'm connected to the internet, the speed drops to 100 KB/s - 200 KB/s. My adsl connection has a bandwidth of 1 Mbps (about 128 KB/s).

  Has anyone faced similar problem? No idea what to do?

  You said that you receive the Internet wireless at 100-200 Kbps (kilobytes per second), but I guess you're saying 100 to 200 Kbps (kilobits per second).  If you actually get 100 to 200 Kbps, so it is faster than your reported 1 Mbps line speed.

  A wireless connection is more important than a wired connection.  If most users, when connected wireless, get only about 50% to 70% of their wire speed.  So I'm expecting a 1 Mbit/s connected to the Internet, you should be able to get 500 to 700 kbps (kilobits per second) = approximately 50 to 70 Kbps (kilobytes per second) when connected wireless.

  When you file transfer from computer to computer on your local network, your speed is limited by 54 Mbps Wireless g your connection speed, which can provide a data rate up to 20 to 25 Mbit/s.  It is clearly much faster that your 1 Mbit/s to the Internet can provide data.  So that explains why the transfer of files on your local network is much faster than your wireless Internet connection.

  So, the only real problem I see is that your speed of your WAN (Internet) port to the wireless local area network computer seems to be slow.  The most common cause of this problem, is the default to reset the router by default after a firmware update.

  If you did not reset to the factory settings since the last update of the firmware, please do it now and see if it solves your problem.  After the reset, you must configure the router again from scratch.  If you have saved a router configuration file, DO NOT use it.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• Satellite M500 - Mouse pointer disappears when you play games online

  I have a brand new, custom configured M500 form Toshiba. It has Windows 7 Professional Enterprise, 64-bit edition. Everything worked great until I spent a lot of money on the game Star Trek Online. When I go in the game, the mouse pointer disappears. I can see on the screen change action items when the mouse hover over them but no pointer. It makes the game difficult. Then I tried another game online, Free Realms, and I have the same problem.

  I use a Logitech V220 Wireless mouse. I uninstalled the Logitech driver to see if that was the issue. I allowed Windows to use the default driver provided with the system. It does not work.

  I called Toshiba and they had me remove the device and selected Windows generic driver for that. It works no more. The guy on the line said it would enter my service call and that she would go to a senior technician and they would call me within 24 hours. It has been two weeks and not a glance.

  Anyone else has this problem or know of any other way I can try to solve it?

  Hello

  To me that sounds like this, there is a problem (incompatibility) between this online game and your external mouse...
  In your case I remove the mouse and uninstall the driver. Run CCleaner to clean the registry. Now try the touchpad online.

  More update the display and DirectX as Al - eX driver already written.

• Satellite Pro L300D started crashing when you are connected to the projector

  Hi all, I have a Satellite Pro L300D, have since January. In March of this year, it developed a problem.
  He began to turn the power on and off screen until I got the blue screen of death and had to reboot the laptop, also BIOS crashed. He was sent to Toshiba and got sorted.

  I use the laptop in the Church for the presentation to the powerpoint, we use a projector that connects to the video output on the laptop, but it has now begun to crash whenever I connect the projector to your laptop.

  Can I use the powerpoint, switch to the view of presenters and show the presentation of 30 minutes, then the screen goes black for about a second, the laptop and the projector off, then when they come again, I get a message saying that the display driver has been restarted, little after that the screen turns off, and then market / stop about six times before that I get the BSOD.

  Also, if I show a clip AVI or video during the presentation, it will crash soon after or even before its done.

  Have updated the drivers for laptop, I always get a message stating all the drivers are up to date and I am quite at a loss to know what to do next.

  To be honest, I'm so fed up with it that I am almost to the point of buying an Apple Mac Pro and away from Windows-based computers all together, my friends have macs and they never have any problem.

  Someone at - it an idea on what could be the problem?

  RGS
  James

  Hello James

  Can you please tell me what mode you are using for the presentation?
  Is that what this duplication mode (the same image on the LCD screen and the external device) or something else?
  Do you have problems if you use the single external device (LCD screen is OFF)?

  Movie files can be problematic if you run on laptops LCD and try to switch to the external display while the movie is running.

• I get "an error occurred, please try again later" when you try to view videos youtube on Firefox, but no problems on Chrome

  I get the error: "year error has occurred, please try again later" when you try to view videos youtube on Firefox.
  I tried to use Google Chrome and everything's good about it.

  Things I've tried:

  • Clearing cookies, history etc.
  • Removal of cookies.sqlite
  • Re-installed a new Firefox
  • Re-installed Flash Player 14
  • Get rid of Flash Player 14 and returned to Flash Player 11

  None of this has worked.

  I get the error for all videos to youtube every time, it is not a random phenomenon.

  I'm really frustrated by it because Firefox is my favorite browser and now I am forced to switch to Chrome.

  If you live in India then see:

  • http://www.medianama.com/2014/07/223-World-Cup-2014-472-websites-including-Google-Docs-blocked-in-India-following-Sony-complaint/
  • http://www.nextbigwhat.com/Delhi-High-Court-orders-block-Google-Docs-several-websites-297/
  • http://delhihighcourt.NIC.in/dhcqrydisp_o.asp?PN=119642 & YR = 2014

• I get a message saying try again later when you try to upload a picture from my pc to icloud.

  I get a message saying "try again later" when you try to upload a picture from my pc to icloud. It starts then stops just before the end. try again then the message.  I was also hard to get the pictures to download sometimes. Someone knows what's the problem? Thank you!

  Hi Redsoxgal5,

  Thank you for using communities Support from Apple! I'm sorry to hear you are having these problems with iCloud. If you are having problems with iCloud Photos on your Windows PC, you can find information and troubleshooting procedures described in the following article useful:

  Get help using iCloud Photos on your Windows PC - Apple Support

  Concerning

• Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes February 29, 2016

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.  During the process I started to have some warning of our AT & T account that I approach the limit of our data plan, then in quick succession, only warnings, said I've reached the limit and then passed in the data, limit charges.  At the time it was done, I had accumulated more than 2 gigabytes of additional data charges.

  Until that point, I was very pleased with the device and confident in the ability to use Wifi and data.  Due to this incident, I became very suspicious of the camera and the huge potential for data overcharges. It is extremely disconcerting as it happened while it is directly connected to the internet using my computer at home.

  Please note that, in the episode my ISP and the computer is remained connected to the WEB with no sign of connectivity issues.

  Someone at - he had a similar experience and understand what went wrong?

  Thanks for your support,

  Jerry

  JerrolK wrote:

  Why the last OS update cost me gigabytes of data when you are connected directly to my computer and ISP via Itunes.  29 February 2016

  While it is connected to ITunes via my Dell system, I was informed of the latest OS update for my IPhone 6.  I decided that the direct connection to the internet would be the fastest way to download and install the software.

  You have chosen the option of direct download, you have received a message of warning from AT & T about it yet.

  He did what you asked it to do.

• Internet goes when you are connected to wifi

  Bought an iMac on eBay this week, works fine apart from a problem I encounter with internet stall, which really starts to get boring!

  It's an iMac, mid-2011, with OS X el Capitan 10.11.3 installed and put to update to the most recent update.

  The question...

  When you are connected to our home network (Sky Broadband) I get internet access for 5 minutes for an hour then stop him internet but the wifi is connected. At this point if I check all other computers/phones/tablets on the network that they are all still connected to the internet with absolutely no problem.

  The temporary solution...

  If I disable the wifi on my iMac and then back on again once it reconnects immediately and internet works fine still a time - until it stops!

  What I tried...

  Restart the mac repeatedly

  Restarted the router again

  In network settings, advanced on the mac, I renewed the DHCP lease (loads of times - note it always seems to come back with exactly the same ip address - I guess it's good?), updated the DNS (last post I read said to use 2.4.4.2 so am currently on that), tried to manually set the MTU to 1453, I deleted all the other networks stored outside my home network Too much.

  Does anyone have any suggestions please for all messages that have worked for them, or things that I could try?

  Thanks a lot for your help

  Joe

  Did you erase the internal drive and install OS X yourself? Did you run the hardware test? If this isn't the case, please do both.

• the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I am disconnected and then reconnected___

  the pop up Windows Defender when you are connected to the internet by dial-up readings; change of system in known application, type of change; running applications, cwindowssystem32mswsockdll, I disconnected and then reconnected.

  I just ran windows update on a large number of files all successful before this happened, it happens when I am connected to the internet, I use dial-up access

  added on 25/11/09 still have the problem mentioned above, even explore two windows are runnibg on the system, or two IE browsers running?

  Added 27/11/09 I ave followed all instructions up to and including thefix tool kb/93623, stiil I have this report of windows Defender quickly appearing twice in a row, then I'm disconnected from the internet. any more ideas thanks sam

  Visit this link:
  http://support.Microsoft.com/kb/936213

• The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

  The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

  A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

• Copy-hard drive when you are connected to vCenter

  Y at - it a command to copy a virtual disk when you are connected to the server vCenter instead of being directly connected to each ESX Server?

  Thank you

  KeV

  You can use the cmdlet Copy-DatastoreItem but there are a few known issues with this cmdlet when the current generation.

  Or you can use the underlying CopyDatastoreFile_Task method.

  Note that you need to copy all the files (header & flat file) that make up a vDisk yourself!

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Satellite L25-S1192: WLan disconnect when moving from router

  I looked in the nets, and I can't find an answer to my exact problem.

  I have a laptop Satellite L25-S1192 and XP running.
  My problem is the Wi - Fi works very well until I'm 10-15 feet away from the router.

  Once I get beyond that point, I lose the connection even if when I display the network connections it shows that I'm still have an excellent signal and always connected. Other laptops work in the House and I did several other tests to rule out the router.
  I updated the driver but nothing seems to help.

  Given that the connection is working near the top which tells me the settings are correct.

  What Miss me?
  Any help is appreciated.

  Hello

  In my view there is nothing wrong.
  The WiFi signal seems to be too low and therefore the WiFi disconnects.

  I think that this happens when you run Notepad with battery operation. Right?

  Well, you can go to Device Manager-> properties-> Advanced tab Wlan card
  There you can check if the WiFi network is set to mode harder

• Satellite A300 starts sometimes like when you turn it on

  Hey people,

  So my sisters laptop (satellite A300) was more than heating for basically since we bought it, but now I think that has caused a serious problem.
  Now it does not start at times like when you turn the backlight only market not even turn on.

  Hard drive does nothing basically nothing just the power light comes on it is all.
  But when I remove the charger and close the lid and open it again, wait like 2 minutes it magicly towers, so it's the startup problem.

  This may have something to do with it, but when you plug the cable that the tactile area (above the keyboard) lights up if laptops or disable but don't market not turn on if not plugged Chargers... also touch dosen't work area.

  So many things hope you understand all this, thank you!

  Hello

  I think that this is related to the problem of equipment; Maybe this problem of motherboard or power suply electronics problem.
  But that's just a guess and no one here will be able to say what's going wrong with your laptop until it has been checked by a technician.

  That's why I put t think you could solve this problem, install the new OS or new BIOS.
  I therefore recommend to request a laptop technician help and equipment to check.

• Re: Satellite L300 - Keep recovery partition when you use DBAN

  Hello

  I usually use DBAN to wipe my drives, however, I am interested in doing this on a laptop without destroying the recovery partition.

  Essentially on a satellite L300 I want to erase the HDD using DBAN (Darik Boot and Nuke) (while maintaining the recovery partition), and then perform a clean installation of Windows 7. Is this possible or should I look at another alternative?

  Thank you

  I don t use DBAN and may not give you the right answer, but one thing I must say: create a recovery DVD using the Toshiba recovery disc creator pre-installed and after doing this, you can do whatever you want.

  If a problem occurs, you can install OS using these disks.
  Please note: when you install using Win7 clean recovery of recorded disc image non-Toshiba makes no sense more because you will not be able to start the recovery of HARD drive more. For factory again, you must use Toshiba recovery DVD.

• Satellite A100 has sometimes unresponsive when you turn it on

  I have a computer laptop Satellite A100, Centrino Duo. Sometimes I have problem when you turn on the laptop. The computer stops responding while it is turned on and when I reboot without disk scan is started which is usual when windows does not start successfully.

  Sometimes the computer starts and I log in the system but then the screen turns white and even when no disk scan is started when I restart the system.

  Pls advise.

  Hello

  In my office, I have the Satellite A100-504 and so far, everything is OK. I didn t notice something similar to described issue. Have you noticed this problem since the first day?

  Can you please tell me what A100 you have exactly? Is - this WXP or Vista preinstalled laptop?