Satellite L655 - popup Message 0xC200

Similar Questions

• Re: Problem of recovery on Satellite L655

  Hello

  I have a problem with my Toshiba Satellite L655 - 19 c his departure in the system recovery option
  After diagnosis, I get a message "windows cannot repair this computer automatically.
  After that, it restarts

  Please help I cant access my pc, repair or restoration

  more photo for the problem
  https://www.dropbox.com/sh/d46nmkw7x1k0iki/AADWRSwwkaEoGeUN0Yhq_o_aa

  *@Fadi_1*

  the link posted by Ilay works. Check again.
  It describes how to perform a HARD drive recovery. I guess this is necessary since the system cannot be repaired using the automatic repair procedure

• Satellite L655-1HE «Problem of HARD drive recovery»

  Hello

  I have the Satellite L655-1HE. I created a "HARD drive recovery" through "create recovery media. On the contrary, CD/DVD, I put it in a USB Flash drive. But when I used it, a mistake was "copy of splitpart or the Canadian Red Cross has failed!" After that, I can't boot my laptop more. There is a message "BOOTMNGR missing." I think I already deleted the operating system in the player. Please help me. How can I fix?

  Hello

  If you can, please try to boot again from the USB and run the recovery.

  Whatever the problem, if the recovery is unsuccessful, I recommend the following steps:

  -buy a set of recovery-store to the wire to https://backupmedia.toshiba.eu
  -If you did, and even this game fails to install, take care to check your HARD disk for problems.

  Hope this helps

  Tom BR

• Satellite L655 - plugged, but not charging

  Hello

  I have an a computer Satellite L655 laptop and it worked very well to the top until there's a week, where all of a sudden it shows the message: 'PLUGGED in NO CHARGE.

  After a bit of troubleshooting, I tried many things including the battery removal and runs directly to the a/c power. Everything seemed normal from a mechanical point of view.

  However, after having also updated the driver software of all 3 components of the battery (found by Device Manager), the only thing that works every time, but is quickly reversed, is actually uninstall 'compatible Microsoft ACPI control method battery'.

  First of all, I don't know what this is... but I can't have to do each day in order to get my laptop to load. I can't always have a power when I need to use my laptop... can someone please help me know what on Earth has happened to my laptop and what I can do to fix it permanently?

  Thank you very much

  Anelia

  Hmm, you could try to remove this compatible Microsoft ACPI control method battery and could change the automatic installation of the driver for the device.
  1. Click Start, right-click computer and then click Properties.
  2. in the list of tasks, click Advanced system settings.
  3. in the System Properties dialog box, click the Hardware tab, and then click Windows Update driver settings.
  4. Select never check for drivers automatically when I connect a device.
  5. click OK twice, and then close the system dialog box.

  Now the driver for control method battery Microsoft ACPI-complaint should not automatically install.

  But I guess this isn't a better solution for you, but probably only system restore would help solve this problem.

  Otherwise, it could be a battery problem and this means that the battery must be replaced.

• Satellite L655-16F - Factory reset using Recovery Media discs

  OK so I'll try to reset my Toshiba Satellite L655-16th back to factory settings, then he started giving me the out of memory error message, but I don't have that drives it asked me to do when I got the laptop, so when I do the F8 all start up and go to the screen with the Toshiba HDD recovery resetting thing and click on it It gives me this error message:

  * HDDRecoGUI *.
  Operating system recovery is impossible!
  Not found the HDD Recovery folder on the second disc of the first hard drive.
  There is no valid disk HARD recovery environment on this computer.

  I tried various different things; Press 0 - which gave me a screen asking you what operating system, I wanted to use (there is only Windows 7) then just continued to load as usual. Put the first disc in and restart my laptop (which I have pretty well every time anyway) - which did nothing. etc.
  So yes, is there a way to create the file from HARD drive of mystery I need the disks, or maybe another way to use the disks that I have not already tried?

  > Not found HDD Recovery folder on the second disc of the first hard drive.
  > There is no valid disk HARD recovery environment on this computer.
  This message appears if you have deleted the recovery image or changed the structure of the partitions on the HARD disk.

  If you have created disk or recovery disk that you can install the recovery using the recovery DVD image.

  Start your laptop and meadows F12 repeatedly to enter the boot menu.
  Place the recovery disc into the optical disc drive.
  In the menu choose the CD/DVD drive.
  Press ENTER.
  Follow the menu on the screen.

• Satellite L655 - 14 X beeps at startup

  Hello

  When I start my Toshiba Satellite L655 - 14 X (Version 2.40 Version 1.80 THIS system bios InsydeH20 bios) at each start of the 'Starting Windows' screen it beeps without stopping.

  I wanted to just reinstall Windows7 format is the same.

  Could you please help me quickly?

  Thank you.

  Message was edited: assignment has been translated

  Disconnect all external devices. Then switch on and press F2 to enter the BIOS.
  Then set the default BIOS and save the changes.

  If you want to reinstall Win 7 system, I recommend you to use the Toshiba recovery disc. The drive would set the notebook back to factory settings.

• Connection network satellite L655-121 always shows 'disconnected '.

  Model: Toshiba Satellite L655-121
  OS: Windows 7 Home Premium
  NETWORK card: Atheros 8152 - 1.0.0.36 driver version (also tried 1.0.0.26)

  connection network always shows 'disconnected '.

  I tried the following:
  -straight cable connection from the laptop to the router - no link
  -crossover PC-to-phone cable connection = no connection
  -used work cable from the printer to the router and the laptop to router - no link
  -changed (tested) cable and router port - no link

  also a linux distribution installed with shows the installed NIC but his are not all RX or TX packets
  diagnosis with toshiba used cable connected - message was "cable can be damaged or not connected.

  all other tests I should try/run before going to the Service Center Toshiba for repairs, and how long they can hold my laptop for repairs - the whole motherboard must be replaced?

  Are you using 64 bit OS originally that you got with your laptop?
  Have you noticed this problem from the beginning?

  Card LAN listed and activated correctly in Device Manager?

  When you connect the LAN cable is green LED on?

• My Satellite L655-1DT has sometimes BSOD

  Hi, can someone help me with this problem
  My Satellite L655-1DT sometimes hangs at startup of windows 7, BSOD lasts for one second and then restarts.
  After reboot it running repair of the start-up and after that, it starts and does not crash.
  Windows displays the following message:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFD00C0000E00
  BCP2: 0000000000000000
  BCP3: FFFFF960001791D3
  BCP4: 0000000000000007
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\010611-18829-01.dmp
  C:\Users\Ljilja\AppData\Local\Temp\WER-32651-0.SysData.XML

  Thanks for any help.

  Hey,.

  To be honest it's not easy to say a few words on the blue screen, and I think that additional information like BCCode are useful for Microsoft.
  Here he user to user s only forum

  Have you changed something on the configuration of hardware or updated driver?

  If it s a recovery software problem or driver installation would help you to get rid of it. You should try ;)

• Can not connect to my laptop Satellite L655 - 14 c to the TV via HDMI

  I was working with HDMI port to connect my laptop Satellite L655 - 14 c to TV. Everything worked fine for a year. But it has stopped working recently. Laptop detects the TV when connected but TV shows error message "no video signal". I've tried it on two different TVs - does not work. Someone has an idea what is the problem? Thnx!

  Hello

  Have you tried the Fn + F5 key combination to switch between the internal and external video output?
  Try this!

  Usually, you must press this combination several times in order to get on TV

  What display driver update? Try it too!

• Device Intel WLan 6230 USB not recognized in Satellite L655 running Win8

  I installed the Intel Centrino card 6230 WLAN for laptop Toshiba Satellite L655 of my wife (introduced to my HP laptop, but due to their allow list, it does not start... but it's another story).

  Wifi works a treat, and I'm pulling in a little more speed of 100 mb/s (http://www.speedtest.net/result/2328501761.png) to connect to my router dual band 5 GHz.

  I understand this card features also the Bluetooth capabilities and I think that is where my problem comes from.

  I get a warning balloon will appear in the system tray saying "Device not recognized USB" (http://imageshack.us/f/208/intel62301.jpg/).

  I followed various supposed fixes, including the removal of the drivers, as you can see from the photo I've already done. As I'm under Windows 8 Pro 64 bit as soon as I restart the WLAN driver is automatically re-established.

  I tried to install the drivers several times, but I always get the error message as below: -.

  http://ImageShack.us/f/41/intel62302.jpg/
  http://ImageShack.us/f/822/intel62303.jpg/

  I'm looking for one of the 2 solutions.

  1. get the device working properly - Bluetooth & Wifi - there Toshiba never do drivers for the 6230?
  2 disable the ToolTip of the USB, I can do this as a stop, but as soon as I reboot it is back bothers me!

  Any help is appreciated with gratitude.

  Hello

  I m bit confused.
  Your problem is the message: saying 'USB device not recognized '.
  Right?

  Why do you as his associates to the new wireless network card?
  I checked the screenshot you posted above and card WLan (Intel Centrino Advanced N 6230) appears in Device Manager then its recognized by Win 8, thus

  On BT taken in charge by the Intel card.
  I found this software Intel® PROSet/Wireless Bluetooth for Windows 7
  TM http://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21713&Keyword=Bluet & lang = fra
  Normally it should work with Win 8 too.
  Maybe what you are looking for.

• Satellite L655-198 - activation of Windows 7 Home Premium

  Dear Experts,
  I bought my Satellite L655 in January and I have given due to some problems for maintenance (Toshiba). They found that my hard drive was not good and changed the hard drive. After that it worked fine for about 1 month. But since yesterday was from, windows is the message that ' * {color: #FF0000} this copy of windows is not geniune'{color} *. How to solve this problem?

  Kind regards
  Bala

  Hey Buddy,

  Who installed the latest version of Windows 7?

  If you install Windows 7 in Toshiba Recovery disk it s already active and you don t need a product key.

• Satellite L655 - no boot device

  Earlier today, I bought a brand new Satellite L655 - 1 DM. It is not a BONE, so I tried to install a Windows 7. However, as I start the laptop after the initial Toshiba screen I get the following:

  Check the connection of the cable!
  PXE - MOF: Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key.

  Certainly, I am a complete newbie laptop because it is the first laptop I have ever bought, but I'm doing something wrong? I put the Windows 7 DVD in, start the laptop and I get this message. Is there anything else I should do, or a sort of setting I should change so that it works? I did a search on google for a solution but could not find one. Can someone help me?

  Hey,.

  It is generally only related to an incorrect boot order.

  If you start your laptop go in the BIOS boot menu. So press the F12 key. Then place the Windows 7 disc, then select CD/DVD drive as a boot device. Now, the computer will begin with installing Windows, then follow the instructions on the screen.

  Check this box!

• Satellite L655-1HC - how to disable Bluetooth using Win 10

  Hello

  I am using TOSHIBA SATELLITE L655-1HC, recently upgraded to 10 of Windows, but my Bluetooth is not be disabled.

  I tried everything, but no result at all. I think maybe it's like the driver support for Windows 7.

  How can I for me? or is there another solution to make of (the necessary key is missing, by the way).

  1. go to "Device Manager".
  2. in Device Manager, expand Bluetooth.
  3. right click generic Bluetooth adapter and update the driver.
  4. re-start.
  5. now you should be able to turn off/turn on the BT

• Ubuntu on Satellite L655-1 KQ

  Hello!

  I have a Toshiba Satellite L655 1KQ and I don't know if any type of linux or ubuntu works on it and I don't know where can I find the drivers for ubuntu for this laptop.

  Can someone help me?

  Of way General Toshiba doesn't support Linux so you yourself with this.
  I recommend you ask for help on some Linux forum directly. Here, you have more chance of finding little help and good advice.

• Satellite L655 - cannot download drivers

  I am trying to reinstall a Satellite L655 and getting snookered in all directions.

  1. I created recovery disks for installation on the old, due to lack of hard drive. When I install them (after watching paint dry for about an hour), it restarts and then fails on the first round - "installation of windows could not configure windows to run on a hardware on this computer." Suggestions Forum about this error did not help.

  2. the support of partners in South Africa have no copies of the factory recovery disks. They tell me they upload ad hoc drivers from the support site.

  3. I tried to clone the old disk (Windows runs on it, after all) but CloneZilla barfed on bad sectors.

  4. I installed Windows from a Microsoft OEM installation disk image. It runs, but obviously requires some hardware drivers. So I downloaded most of the people I need, like the map LAN, Intel Chipset and soundcard. But the WIFI drivers and screen just download: these are the largest files (60MO & 123 MB respectively) and downloads fail before the end. WELL before the end. I tried several times, using a significant amount of my allocation of bandwidth for the month (we have capped access here in black Africa!)

  I tried the download from another site, I have remote access, perhaps thinking that there is something wrong with my broadband - and got exactly the same problem. The remote site has the speed of the Internet about 6 MB/s - surely enough for a 120 MB file transfer? Apparently not.

  I tried these downloads from before the time of breakfast, through the afternoon and night, and it's now after midnight, all with the same results (I'm on a time zone that is in the middle of the Euro zones).

  From Toshiba Web site does not support download resuming, and there is no mirror sites. What happens in the blue flames is a person supposed to do?

  * UPDATE *.
  Download of driver WLAN 60MO on remote site succeeded on the second try. 120Mo adapter driver has not yet earlier on the second attempt to display. I don't see much point in trying once again, have you?

  * UPDATED MORE *.

  'Config' free download that I thought was the WLAN driver, turned out be just the crapware "config utility" and does not include the pilot. (Apparently), there is no driver for the wireless card. So I am always without WiFi and the screen is stretched wide.

  Oh and I tried to look elsewhere compatible drivers - the hardware ID displayed in the Device Manager tell me that the wireless card is a _Broadcom Dell 1501/1503/1701 a half Mini Card_ and graphic adapter is an ATI Mobility Radeon HD5650M_ _AMD. So I googled those chains, found things almost identical or very similar (on the Dell site!) that I downloaded - don't. Not good, "hardware not present on your computer.

  Anyone know where I'm going now?

  Model is Satellite L655 (PSK1JE) - WIndows 7 64 bit