Satellite L70-A-118 - problems with WiFi after Windows 8 to 8.1 Win update

Similar Questions

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Problems with Wifi on windows 8

  Dear Microsoft

  I report a serious problem with loss of WiFi connectivity on windows computers 8. Sometimes many different problems occur when trying to restart our system of windows 8, after that we had problems with our applications, we had problems with WiFi connectivity on our computer that shipped with 8 64-bit windows. Please take this issue seriously and solve this problem as soon as possible... Can you please do a few good deeds as the determination of the loss of WiFi connectivity on our computer?

  Thank you for the problems I have with windows 8.

  To avoid confusion and duplication of effort, please post all further follow-up replies to your original-online http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/ie-10-issues/c0ac0ed8-ddc0-4a7c-8f08-7f84f2ddcded thread (March 8, 2013 & ff)

• HP laptop - 15-r150nm: problem with wifi after update realtek adapter

  Hello! I've updated some drivers of HP customer service and then restarted computer. When it is on I couldn't use wifi. When I select the problems, it says: 1) "" Realtek 802.11B/G/N WIFI adapter RTL8723BE has some problems to the program control or hardware. "" (it is Croatian, so I tried to translate it for you)

  (2) "a network cable is not plugged in correctly or may be broken.

  What should I do, I have only this laptop and internet wifi, write this work? Thank you!

  Hi @frane53nja,

  Welcome to the HP Forums!

  This is a wonderful place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that your laptop works OK and after updating drivers on reboot HP customer service, you have lost your wireless network. When you run the Windows troubleshooting tool, you received a message that there was a problem with the NIC due to recent hardware or software changes.

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  Before you perform a restore, as shown in the above troubleshooting steps, you can try this option.

  Go to the nursery of the device

  Click the network tab to expand the list.

  Right-click on the wireless network adapter and select roll back driver.

  Repeat this process for all types of adapters listed.

  While on this screen please check this definition also.

  Right click on the wireless adapter and choose Properties.

  Click the power management tab.  If "allow the computer to turn off this device to save power" is checked, please remove and click OK. Repeat this operation for all types of adapters listed.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Pavilion p256ur: problems with Wifi after waking up (only)

  I have a problem with my new laptop Pavilion p256ur. After he wakes up (only) the wifi (Broadcom BCM 43142) adapter does not. turned on in device management, it can not find any network. WiFi button (in the system settings menu and status bar) don't respond - it seems that the wifi is turned off. I try to:

  1 power off and power on this card in Device Manager

  2. turn off power off (to save energy) option in the settings of the adapter

  3 (default) old uninstal and install the most recent drivers

  4. install the latest driver for chipset

  5 control wlansvc service-, she strives to after wake up

  but his do not solve the problem.

  If I try to reinstall the drivers wifi after last stride upward of his works, but until the next morning to the top.

  In an event list management device devices there is a message:

  Bcmwl64.inf_amd64_0f3430bbd776c163\bcmwl64.inf installation driver for device with ID PCI\VEN_14E4 & DEV_4365 & REV_01\0000E2FFFFCDD85D00 & SUBSYS_2230103C, supplemented by the following condition: 0x0.

  After the system restart wifi works correctly, so if I want to use the wlan I must not sleep notebok. but restart it every time (or reinstall the drivers) is not comfortably. can you help me please?

  Hi @Medvejo,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your 15-p256ur HP Pavilion Notebook and Wifi problems after wake up. I see that if you change the balanced power plan options option in the book will help. Here is a link that will help you. Go to your power options. Select balance, then click on change plan settings. Click on change advanced power settings. Click on choose what the power button. Figure: 13 choose what the power buttons. -Uncheck allow the computer to turn off this device to save power under the management of the power supply of the wireless adapter.

  Please let me know how it goes.

  You can say thanks for trying to help by clicking on the Thumbs Up below! .

  Thank you.

• Problems with WIFI after sleep-wake up.

  -Wifi does not randomly after coming out of sleep.
  -Sometimes it can see the network with at least 2-3 bars, but does not connect and the Troubleshooting Wizard offers no help.
  -wifi only way to recover is to uninstall the wifi adapter driver in Device Manager and then reinstall it, and then it works fine.
  -This problem only occurs when I am a little close to the edge (still a lot within wifi range) of the router. otherwise, IE very close to router, there is no problem at all.
  n ' has not had any problems with windows 7 at first, but wifi problems randomly started upward. uninstalled the 2-3 most recent programs with Revo Uninstaller.

  Notes: thinkpad x 61 Tablet, fresh running windows 7 (not upgraded), card express 11 a/b/g wireless lan mini pci, router is an apple Airport extreme from 40 feet away with WPA2-Personal Security.

  Hey art vandelay.

  Welcome to the Microsoft Answers community.

  I suggest you try the methods one by one and check below.

  Method 1:  Uncheck allow the computer to turn off this device to save power option in Device Manager and check.

  1: click on start, go to control panel. In Control Panel, click small icons to DISPLAY.
  2: find the network and sharing Center and open it.
  3: on the left side, you will see an option that says "change the map settings. Open it
  4: you'll be there, two local and wireless connections. Right-click on WIRELESS one, and then select Properties.
  5: now, click on CONFIGURE.
  6: you will see 5 tabs, click on the last one that says "power management."
  7: now simply UNCHECK the first box that says "allow the computer to turn off this device to save power".

  Method 2: Perform the cycle of power modem/router.

  (1) turn off the power to the modem (unplug). If there is the router turn off the power (unplug).
  (2) unplug the Ethernet cable that connects the modem to the back of the computer or router on the back of the computer. Disconnect at the end of the computer. If there is a router, follow the same steps, disconnect at the end of the computer.
  (3) shuts down the computer (not restart).
  (4) wait at least 4 minutes.
  (5) switch on the modem. If there is a router enable the router as well. Wait for the lights on the modem\router to stabilize.
  (6) connect the Ethernet cable to the computer.
  (7) turn on the computer. Now, try to connect to the internet.

  Method 3: The restore of the system on your computer.

  System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information visit http://support.microsoft.com/kb/936212/

  You can also try methods provided in the article.
  http://support.Microsoft.com/kb/928152

  Hope this information is useful.
  Let me know if it worked.

  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• Satellite P870 - problems with WiFi after Win 8.1 upgrade

  Wireless Internet is hopeless.
  Maybe that 3 to 10 pages will load correctly or not at all, for most not at all.
  Other wireless devices in the House are fine, as is the use of the Ethernet.

  Checked the drivers through the Device Manager, says that they are up to date.
  However using the toshiba service station he lists 12 updates including one for the driver Realtek wireless.

  The date of release permanently after the last version installed.
  Try to update by the service center to complete and then comes up with an error message, something like the process is completed by the user.

  Of course I never finished anything.
  Any ideas/thoughts? Just uninstall 8.1?
  Although I'd rather not.

  Hello

  Did you Win 8.1 installation instructions?

  The Win 8.1 drivers must be installed in the correct order!

  I found this info on the page of the Toshiba UE driver;

  1 wireless Intel display-> uninstall
  2 windows 8.1 update-> Install
  3 TOSHIBA Assist Office-> upgrade
  Driver Intel 4-> upgrade
  Display NVIDIA 5-> upgrade driver
  6 Intel Rapid Storage Technology driver-> upgrade
  Driver HD Audio NVIDIA 7-> upgrade
  Atheros Wireless LAN driver 8-> upgrade
  9 Realtek Wireless LAN Driver-> upgrade
  Driver Realtek 10 package filter Bluetooth-> upgrade
  TOSHIBA 11-> upgrade system driver
  Function key 12 TOSHIBA-> upgrade
  13 TOSHIBA eco Utility v2-> upgrade
  14 TOSHIBA PC Health Monitor-> upgrade
  Fingerprints TOSHIBA 15-> upgrade utility
  16 TFPU WBF remove fingerprint-> upgrade tool
  17 TOSHIBA HDD Protection-> upgrade
  18-> upgrade TOSHIBA VCR
  TOSHIBA 19 Blu - ray disc player-> upgrade
  ArcSoft TV5.0 20-> upgrade
  Plug-in for Windows Media Player-> upgrade TOSHIBA 21 resolution +.
  CyberLink MediaShow 6 for TOSHIBA 22-> upgrade
  23 TOSHIBA Media Player by TrueLink sMedio + -> upgrade
  24 TOSHIBA Service Station-> upgrade

• Problem with WIFI after Migration

  Hello everyone

  I'm new here, I have the small problem after migration of 10.9.5 system.

  I migrad my files to a MacBook Pro start 2014 for a Mac mini mid-2012.

  After the migration is successful on the Mac mini, the WIFI does not work on the Mac mini.

  I think it's a fault of the driver, but how do I install the WLAN driver?

  Thanks for the support

  Best regards

  Demian Klee

  Were the two Macs on 10.9.5? If this is not the case, what were the OSX versions?

• problems with wifi after update? anyone?

  I use A953, just updated to build mils2_u6_4.1 - 22, the system version is: 64.1.22.S953. Retail.en.DE

  So far, I like the update, looks cool, like the animation of the screen-go-to-sleep

  But, my WiFi is not working properly, there are just a couple of the available networks and mine is excluded...

  Has anyone of another expirience of something similar?

  Help!

  Thanks in advance,

  Luka

  What I read somewhere else (may be exceeded), is some wifi router to use an automatic selection of chanel. By some users when the chanel 13 is used there is a problem. When they choose the beach (..-12) the problem disappeared. This problem seems to occur with some AVM fritzbox

• problems with wifi after 8.1 window netgear96

  After upgrade to 8.1, the wifi connection is unreliable, inside and out.

  Hi billbanta,

  We will try to remove your Wi - Fi card and let Windows to install it again. This will reset any options or configuration errors that may have been applied.

  Press and hold the Windows key and press W.
  In the search bar, type "Device Manager" (without the quotes) and press ENTER.

  Once inside the Device Manager, please find and unfold the group named "network adapters."
  From there, to identify your wireless card (it will very probably include the word "wireless" or "802.11".

  Now, right click on the wireless network device and click "Uninstall".
  If you're facing a check box asking if you want to remove the driver as well, please let it be empty.

  After the device has been uninstalled, restart your device and try to connect to the wireless again.

  If this does not resolve the problem, please let me know your product number (if you don't know how to find it, click here)

  I would like to know how that works for you.

• Re: Problem with WIFI after letting my girlfriend type

  Hello!

  Yesterday, my girlfriend has taken control of my Satellite A200 and obviously knocked out features WLAN by linking some strange key combinations.
  The WLAN atheros is no longer available in the overview of the system, but the external light in front of the laptop is turned on (and also switch, of course).

  LAN internet connection is still active through the cable, but I don't know what to do now to reactivate the WLAN. I am not able to set up a WLAN connection more. Does anyone have an idea?

  Thanks a lot and best regards
  Joerg *.

  System: WIN XP SP2

  Hello

  ConfigFree you can find in the folder TOSHIBA (start > programs > TOSHIBA).
  Check it!

  You see yellow exclamation points in Device Manager or an unknown device?
  What happens if you try to install the WIRELESS driver for your laptop? You can download it on the Toshiba site.

• Problems with printer after windows update on Vista

  I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.

  My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."

  I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.

  Help, please!

  Hello

  What updates caused the problem to occur?

  Look for updates in the update history.

  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

  (b) in the left pane, click view update history.

  c. to display more information about an update, double-click it.

  I suggest that you realize the following methods and check if they help to solve the problem.

  Method 1:

  (a) click Start, go to control panel

  (b) select system and Maintenance

  (c) select administrative tools

  (d) double click on Services

  (e) in the services list, scroll down until you find one called "print spooler".

  (f) make a right clic on "Print spooler" and "restart".

  (g) "suppression" of work will be lost and all work queued in your queue will print.

  Method 2:

  I would completely uninstall and reinstall Epson SX215 printer driver package.
   
  a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

  b. right-click on the printer you want to remove, click on remove the device and then click Yes.

  If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.

  Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. now, reinstall the printer . Note: Valid link also for Windows Vista.

  Method 3:

  If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• B570e problem with wifi on Windows 10

  Hello

  I've updated to windows 10 and everything is fine but not the wifi connection. I can connect using ethernet, but the computer does not find the wifi option to connect to the Internet. I read on the Internet and I think that the problem is the drivers. You know a way to fix this? Do you know if Lenovo will update all the drivers?

  Right now, I hate windows 10

  Thanks to collateral.

  Hi again,

  I think I found a solution in the windows forum. I uses this information to make it work:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_devices/wireless-network-ADAP...

  If you have a better option, please, share it. For the moment, this option works for me. WiFi connection is ok

  Thank you very much.

  Best regards.

• Problems with printer after windows updates 14th Dec2011

  December 14, 2011, downloaded the windows updates now, I don't see my network printer. I have a mac, a computer laptop xp pro and a win7 pro, mac workstation still sees the printer and it works. Computer laptop xp can't find any, work stations can be found, but it will not print correctly. The printer is a laserjet 1022n, it has the latest firmware and two windows machines have drivers elatest th. Help!

  Hello

  ·         Your computer is on a domain network?

  Follow the form as follows article and check if that helps.

   

  How to use Windows XP to share a printer with other people on your network

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  See also:

  Cannot print to a network in Microsoft Windows shared printer

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02030510&tmp_task=solveCategory&cc=us&DLC=en&JumpID=reg_R1002_USEN&LC=en&product=439323

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true