Satellite L750/755 - no connection after Windows updates

Similar Questions

• Satellite C55-B5101 - black screen after Windows update

  Mobile received Christmas day (all new) Satellite C55-B5101, saves Windows update (formerly 8.1) by getting only now black screen... Not very in computers so if you know what please he dumb down for me! Thank you

  Hello.
  I'll post a similar problem with mine. Here is something I've read elsewhere that can solve yours.

  Unplug the cable from the main charger.
  Remove the battery if possible.
  Press and hold the power button for 1 minute.
  Leave battery and connect the cable.
  Turn on.

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• VDI Client cannot connect after windows updates 7

  Hello

  I did the updates on my windows workstations 7. After the updates when installed, I can not connect with my client of vdi for the connection to the server.

  Anyone have an idea? It works without these updates.

  BR

  Andreas

  It is a well known problem.

  A version of patch from view4.5 (353760) is available for this problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1034262

• Satellite P300-1EI - hangs upward after Windows Update

  After update to Windows Installer the last update (27/12/08), Windows Vista always hangs up on the screen "Please wait" after the reboot.

  After the call to Toshiba support, I was told that it was advisable to do a full restore from the HARD drive and disable Windows Update.

  Y at - it a patch/update driver/firmware to fix this problem and be able to activate Windows Update?

  Hello!

  It s unclear not for me it's such a program or patch available for this program.

  What you can do is to start in safe mode and remove the update.
  If you have no success, I agree with the support from Toshiba. You must perform a HARD drive recovery. Press F8 at startup, choose 'Repair your computer' and follow the instructions in the menu

  Good bye

• Satellite L750 - card problem Flash after Windows 8.1 update

  I looked at other threads in the forum, but each of them suggests to try drivers (function key) for other laptops, the only way to make it work now is to uninstall the driver function key; but the problem is the wifi and Bluetooth is still on after laptop start on stop or put into hibernation.

  and please don't say that the laptop is not in the models supported for update,
  I am really disappointed with Toshiba why they supported update of windows 8 and 8.1 not

  8.1 is free upgrade all laptops with windows 8 should have drivers.
  It was better to leave a total of windows 7 if they were not going to support the heart.

  and another completely unrelated problem is that the DVD drive scans for disc every 10-15 minutes, even if its empty this problem was there from the first day on windows 7, after I installed windows 8 he stopped, but after upgrading to 8.1 that he came once again.

  is there a solution to this problem?
  currently I just disable the DVD drive from Device Manager and activate it when I need it. Sorry for the long post, but I hope you will reply thank you.

  >... but the problem is the wifi and Bluetooth is still on after starting laptop of closing down or put into hibernation
  The same thing happen on my mobile Win8.1 supported so I m wondering there is problem for you. If you don't need WLAN just activate airplane mode.

  Unfortunately on DVD scanning, I can't say much. I have two laptops with OS Win7 (factory settings) and none of them don't these scans. Did you install additional software that might be responsible for this? Do you use original Antivirus that you got with your laptop?

• Cannot connect after Windows Update

  I have the same problem but on Windows 7. After installing the updates I can no longer connect. I get an error that the login or password is incorrect. I don't think that hurt, I type the password. Any help would be greatly appreciated.

  hpuszyns,
  If you are able to boot mode safe mode with command prompt, then you can use the DISM tool to remove the most recent updates.  Then you can see if you are able to connect.

  DISM to remove the updates.

  Start under System Recovery Options , and select command prompt

  At the prompt, run the following command:

  DISM/Online/Get-Packages

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226

  Status: installed

  Output type: Feature Pack

  Install time: 25/09/2009 12:02 AM

  Find the most recent and then make a note of the name of the package.

  Then run: dism/Online/Remove - Package PackageName:WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226(name of update from previous step)

  Then restart your PC.

  You want to start with the most recent and remove them one at a time to find the update problem.

  For more information about the DISM command, visit this link.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Speakers not connected after Windows update

  Windows 7 update will be "unplugging" are then 'reconnect' after I did the updates.  I looked through the other questions on this and have not found a solution.  It is linked to updates and doesn't happen then.  Last updated "unplugged" and has not overturned it.  (in June). Question is "how to their return to the top" and "10 Windows will fix it"?  I used connections front and rear.

  I have a 810 years of HP-145qe;  Intel i7 - 4770K; PROCESSOR 350GHZ; 8 GB RAM; 64-bit computer.

  I have not checked - enabled, no registry errors, his current...  Also - I am a retired user, non-technical, so here's something easy to follow.

  Thanks for your time, Mary

  Hello Mary,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a problem with no sound in the system.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  In order to understand the issue more clearly, I would ask that kindly provide me with the following information.

  1. Have you tried plugging in external speakers or any other helmet and checked if you are able to hear the audio?
  2. Do you receive an error message? If Yes, what is the exact error message?
  3. Since how long you are having this problem?

  This issue would have intervened if the sound card has went wrong in the computer or audio drivers have been corrupted.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  Open the hardware and devices troubleshooter.

  Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If the problem persists, follow method 2

  Method 2:

  I suggest to try the Fixit in the article below and check if that helps.

  Note: This article will help you to fix his computer problems when your computer cannot play audio or when the sound is muted in Windows.

  Diagnose and solve the problems of Windows audio playback automatically

  https://support.Microsoft.com/en-us/mats/audioplayback

  If the problem persists, follow method 3

  Method 3:

  I suggest you to refer to the procedure described in the article below and check if it helps.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The above article will help you identify and solve its current problems in Windows, including no sound from your speakers or headphones.

  Additional information:

  We may also refer to the article below and check if that helps.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=Windows-7

  I hope this information is useful.

  If the problem persists, you can write to us and we will be happy to help you further.

  Thank you.

• Good question after Windows update on Satellite P100 PSPA3E

  I encountered a problem with my sound card after a Windows Update. It became an old analog tuner with problems of dust on his volume knob. (this is a reference "sounds like" for those old enough to remember) I updated the driver to the most recent DriverGuide.com, no joy.

  I even did a complete system restore "with the"product restore disk."" Which fixed the problem until Windows updated the right files for trash again. I don't know what files do the dirty on my card since most of the windows system updates are performed while I "continue to work! Anyone with ideas?

  Thank you

  JD

  Hello

  What operating system do you use? XP or Vista?

  Satellite P100 PSPA3E must use a sound chip Intel high definition audio Conexant CX20551-22.

  I recommend to remove the sound card in Device Manager after installing Windows updates.
  Then restart the computer and install the latest audio drivers available that support the sound chip HD Conexant CX20551-22.

  First of all, you should try to use the driver for the Toshiba page. If this does not work, check the Intel page!
  Please don t forget to restart the laptop after windows update finished.

  Best regrads

• Satellite L500 - system hung on the splash screen after Windows update

  Hello

  I hope that someone can help you. My Satellite L500 is suspended on the blue startup screen after it restarted after a windows update, the mouse arrow moves and it seems to be a hard disk with a twinkle activity in the system lights. Except that nothing? Any ideas?

  Thank you
  Denise

  Hello

  > hung on the blue startup screen after it has restarted after a windows update
  This means that you get a blue screen after Windows update and more, you can start Windows t?

  You can start Windows in safe mode?

• "limited connectivity" on after windows update wireless router.

  Original title: "limited connectivity" on after windows update wireless router. happens all the time after soundcards implemented to date. I then 'restore' on the eve of going online. Why?

  I have... 'limited connectivity' icon wireless router in the toolbar after windows updates. happens all the time after windows updates. I then 'restore' on the eve of going online. Why?

  Hello
   
  What operating system do you use?
   
   
  Method 1:
  Check the update has been installed and make a note of this update.
  To check, follow these steps:
  a. Click Start, in the search box, type in update
  b. click on windows Update
  c. click view update history
  Note: If this isn't a significant update, you can hide the update.
  To hide an update, follow these steps:
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  b. do one of the following:
  o click the link that tells you important updates are available if you have some updates to hide.
  o click the link that tells you optional updates are available if you have optional updates to hide.
  c. Select hide any update you want to hide, right-click and then click on update. Do this for each update you want to hide.
  d. click OK.
  
  If it an important update then you can try the following method 2:
  
  Method 2:
  Download the update of the article mentioned below (enter the number of the update in the search), put the computer to boot and then install the update and check if that helps:
  Download here: http://www.microsoft.com/download/en/default.aspx
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Cannot connect to internet after Windows Update

  I was not able to connect to the internet after windows updates 7 of 14 October 2010, unless I have to restore the system to October 13.

  Hi jlm00926,

  ·        Update that you installed before the problem?

  ·        Are you able to connect to the internet properly now?

  You can set up your computer in a clean boot state. Subsequently, download & install the update manually from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Clean boot will start Windows 7 by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• IE (8) cannot connect to Windows Update

  I can connect is more to the Windows Update web page.  IE (8) connects very well to everything else.  I tried all the fixes I have found in the knowedge base to try to solve this problem.  I ran the malware removal of MS SW tool.  There are a few problems and withdrawn.  I ran Malware Bytes, AVG and the window update utility "fixit".  It also won't work if I go directly to the Windows Update Web page.  It fails after the initial check to see if I have the good SW to run it.  Currently, I can't even view the history of installed updates.   I'm looking for any suggestions to fix this problem.   Thank you.

  Update: the problem has been fixed.  Last night, with the help of technology Microsoft Windows Update try several things to solve the problem, we finally have downloaded and run the application Kaspersky TDSSKILLER what found and hardened rootkit infection: Alureon.

  After re-booting, I connected to Windows Update and downloaded updates of August successfully.  Then, I removed my AVG antivirus (which found nothing previously reported) and installed Avast.  A quick scan found that this same virus again in two places with another and successfully removed them.   Analysis again with all watch all clean now.   It's a nasty infection considering how tools couldn't find and the problems that he was originally.

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• No Internet after windows updated August 18.

  No Internet after windows updated on August 18, to return from vacation.

  System Restore to 8 August which worked yesterday and restored internet, but when you sign in today update windows automatically installed and once again no internet no access. Computer won't let me restore of the system now well I tried different dates - said the system restore could not replace the file (c: Windows) with the original copy of the restore point - an unspecified error has occurred in 0x80071a90.  Still no internet access.  Any ideas please?

  The KB2705219 update could be the cause and uninstall that solved the problem for some users.

  But...

  In another thread [my computer today installed windows 7 updates, but my internet has been lost.] But the network is visible. [what caused this?] a user has identified this notice - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you might want to consider the McAfee fix, as appropriate. At least two users also reported having removed then reinstalled McAfee and their systems were back up & working properly afterwards.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems.  However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually.  So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated.  Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].  My home network has survived without any new replacement set - firewall Windows just took the right settings without any complaint.

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat