Speakers not connected after Windows update

Similar Questions

• U410 - cannot connect after Windows Update after restore factory when the time zone is not UTC-8.

  Steps to reproduce the error:

  1 use OneKey recovery to restore the initial factory settings.

  2. on the initial setup of Windows screen, select a time zone to UTC - 8, UTC (London)

  3. connect to Windows, open the Windows Update control panel and click on "Install updates"

  4 restart the computer to complete the update.

  5. on the login screen, try to connect or shutdown the computer.

  Result:

  Computer is blocked with the only desktop wallpaper and mouse pointer visible. Does not meet all the keys. By pressing the power button sleep machine. Press again on he wakes the machine in the blocked State.

  I have reproduced this problem 3 times for initial help restore every time.

  Wordaround:

  Before starting the factory restore processes, set the clock of system by 24 hours. After the end of the restoration of the factory, set the system clock to the correct time.

  Otherwise, wait 24 hours between a factory reset and try to install the Windows updates.

  Analysis:

  This problem is caused because of the way that Windows stores time. It assumes that the system clock is set to local time rather than UTC. When you use the OneKey recovery system he doesn't know what time zone of the system clock is set on, and so it assumes that it is set to UTC - 8. If it is in fact the UTC value, OneKey Recovery creates files with a time stamp of 8 hours in the future. This causes the Windows Update to fail.

  One step that I forgot to mention, that may be important:

  After the installation of the plant, during the initial configuration screens, I updated the time zone GMT London.

  Since the OneKey recovery uses GMT - 8, this can cause some files to have a timestamp of 8 hours in the future. Maybe if I waited 8 hours before the update of this problem would not occur. I'll test this by setting the clock system for 1 week in the past, make reset factory and then it retroactively to the correct date before the update.

  EDIT: Test successfully. This workaround works.

• Toshiba L 39 4353 TV is not certified after Windows update 8.1 Windows

  The TV worked fine on my computer with windows 8, but after I updated for Windows 8.1 it is said that the TV is not certified windows. Anyone have any ideas? The TV is equipped with the latest updates and fact the computer.

  I think it's a bad place for this question, because this issue has nothing to do with the Toshiba TV.

  I have no idea how the Windows 8.1 update works for other computers, but if upgrading 8.1 to Windows on computers laptops Toshiba, all tools and drivers must be updated to version 8.1 of Windows also.

  I put t know how you plugged the calculation of this TV but it s recommended to repeat the connection procedure after the update of any system.

• NB550D - does not start after Windows Update

  NetBook may have turned off during the update of Windows like now it will not go beyond the Green loading bar with 'Microsoft Corporation' below. It gives an option to start windows normally or to load files to repair, but the two find themselves stuck on the Green loading bar. SafeMode (all options) earn as much as classpnp.sys and then freezes.

  Using a different laptop I did a windows repair disc and then copied the files on the USB key (netbook has no CD drive) according to the guides online. When the USB key is loading files of repair, there is a flashing cursor, and then he's new to the Green loading bar. SafeMode (all options) gets stuck on disk.sys with inserted USB.

  Found a few threads with similar symptoms with most being caused by a questionable HD (verified, nothing obviously disconnected) connection or the SATA mode in the BIOS the wrong (seems to make no difference between ACHI or Compatible). Next plan is to start a live version of linux and try to replace the classpnp.sys file with on another copy of Windows 7.

  If anyone has experienced this before or can give indications that they would be much appreciated,
  Thank you.

  Hello

  To be honest, never had any problems after a windows update.
  But it looks like an anomaly in the system.
  My first idea was the use of the repair option and you try to start the operating system using the option: use the last known good configuration.

  But if it would not help, then you can try to replace the files to aid and booting from the Live CD. Not sure if this would solve the problem, but I think that it of certainly worth trying otherwise you will have to reinstall the OS using the HARD drive recovery (if still available)

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Satellite L750/755 - no connection after Windows updates

  HI, I have a brand new L750/755. network card is atheros.

  There is no way to connect to the internet after you install updates to windows (85Mo, framework 3.5.1 security updates).

  Computer laptop will always find any accesspoints, but connect only with limited connectivity or no internet access.

  I had to restore the laptop before the updates installed to solve this problem.

  How can I work around this problem, or if not how can I get these updates to stop installing on close?

  Thanks in advance

  PS I had already tried installin the latest NIC drivers, change the power settings and connections to all other routers. nothing has worked.

  > I had to restore the laptop before the updates installed to solve this problem.
  Do this and after having done this only automatic disabling Windows update. When you manually do Windows update, install important updates only. Before you begin to update the optional check listed and disable updates updates of pilot.

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP does not start after Windows updates

  Original title: recent Windows update for xp

  As a result a my computer Windows xp, last Tuesday, my computer is now inoperative.  He was fine before this, but cannot get it to turn on.

  When I tried again today, a message came up saying Microsoft to apologize for the inconvenience, but Windows did not start successfully.  A recent hardware or software change might have caused this.
  What should I do now?

  Grandmother,

  If the options above do not, I suggest you use the Recovery Console to try to fix your Windows XP

  Here's HOW - there images, so it is easier to follow. Read the section on how to use it.

  Once you are connected to the Recovery Console, type the following command and press ENTER:

  CHKDSK/p

  There is a space between 'k' and ' / '.

  This may take a few minutes and the command can fix registry issues possible that occurred. This is based on the experience that I have used this on an old XP machine and it showed a message after the recovery that looks like this

  See you soon ~!

• Biometric fingerprint logon is not available after Windows update

  Hello

  I have a HP ProBook 4540 S with Windows 8 (not Pro) preinstalled. I activated the fingerprint reader to log in to the biometric applet when I got it, and it worked very well.

  Recently, after a scheduled Windows Update, he stopped to offer the option of connecting biometric fingerprints. I opened the HP security settings and the settings of fingerprints are still all there. Sliding my finger on the scanner brings up the settings as well. So the device works and the OS recogizes it. However, all the instructions I read that indicate how to enable fingerprint scanning for connection say go to the control panel and find the applet biometric parameters. There is no applet in my control panel which has the word 'Biometrics' in there.

  So I'm at a loss on how to reactivate the connection of fingerprint scan. Can anyone help?

  Thank you

  Mark

  OK, I reinstalled these items, but the function does not appear. However, I found another clue published somewhere in the forum suggesting to go to HP ProtectTools > Administration > administration Console > increase the security of the system. From there, I checked "Windows logon security" and which brought the fingerprint logon.

• Computer does not start after Windows update

  I built my computer in December last year, which makes it less than a year. It has worked fine until this last week when I decided to give a few necessary windows updates a lot. I decided to download and install all night, and now it does not start. I get nothing on the screen. I don't get the safe mode options. I didn't get last known good configuration options. I don't not even a splash screen. After a full minute, it turns off again, regardless of how many times I turn it back on. It happened for a few days. Are no external hard drives not connected; only an intern. The only devices I plugged are my keyboard and mouse. Can anyone offer a solution? Whatever happened to you?

  I am running Windows 7 Ultimate Edition.

  The first time I tried to start after downloading the updates, he went to the boot screen windows 7 usual, that clear blue that says it configures windows and not turn off the computer during the process. Before we were told: "Welcome to Windows," he said "Shutting Down", but not before the configuration of progress has reached 100%. At this time, everything seemed normal. After the computer turns.

  Hello

  To fix your problem, you can follow the steps on this link. You can perform troubleshooting listed on this site by clicking here. The listed on these links troubleshooting steps are applicable to Windows 7 and more.

  Let us know how it goes.

  Best regards

• Lightning will not rise after Windows update 10

  My computer came installed with Windows 7 Professional 64 bit. The computer has a Thunderbolt 2 interface. I loaded the software and the drivers were mounted and worked a lot their use in Garland.

  External drives are USB 3.0 and LaCie thunderbolt. The computer was shipped with the HP security software. I did the upgrade to Windows 10; in the Windows dialog box update, said could not be updated without removing the HP security. I said yes, and since that time, readers not only mount.  After the update, and readers would not mount. I then used system restored and returned the computer to Windows 7.

  When I tried to reload the drivers for LaCie drivers, I get cannot lack of file sysInfo.dll. I download this file, place it in the system 32 folder. After a reboot, I tried and the pilot program installed. However, readers will not rise. I contacted HP and they remote connected to my computer, BIOS update installed, chip set drivers and still drives don't mount not via the port of Thuderbolt2.

  They run a lot when it is connected to the USB 3.0 port. My logic is readers are very much like the mount and run fine with USB 3.0, but is no longer the mount with the crush. I am a photographer and work with large files often 1 GB or more. Thus, the impact of lightning speed is desired.

  I have the drive Professional OEM Windows 7 SP1, however I have a large amount of the image installed and that you hope to find a way to solve this problem without the operating system reinstallation and all the photo editing programs. A pre thank you for everything that helps her.

  Hello

  Thanks for posting your query on the Microsoft Community.

  Method 1: Run System Maintenance troubleshooting

  I suggest that you click on the link below and run the hardware and peripheral troubleshooting tool by following the steps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update storage controller drivers

  Follow the steps below.

  1. press the Windows key + X , and then click Device Manager.

  2. expand storage controller.

  3. right-click on the driver and select Update driver software.

  4 reboot your system.

  I hope this helps. Please respond if you have related research.

  Kind regards

  Jesinta Rozario

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• VDI Client cannot connect after windows updates 7

  Hello

  I did the updates on my windows workstations 7. After the updates when installed, I can not connect with my client of vdi for the connection to the server.

  Anyone have an idea? It works without these updates.

  BR

  Andreas

  It is a well known problem.

  A version of patch from view4.5 (353760) is available for this problem.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1034262

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• Laptop HP - 15-r213ns: hotkeys (keys of wifi sound, brightness), does not work after windows update

  Hello

  I have a HP laptop - 15-r213ns (ENERGY STAR) with windows 8.1

  Last night, after an update of windows, the shortcut of the brightness (F2 and F3) volume (F7 and F8), wifi (F12) and keys all others have stopped working.  I can always change the brightness and volume using windows, but I can't do more using the keys.

  The function keys are working, as refresh F5 or F3 Browse. I noticed that before I had to press the FN key for this and now she does without the FN + Fx, so I guess that the update of windows must have changed something here.

  They used to work fine before the update. I reinstalled the display drivers (NVIDIA G-FORCE 820 - M) and looked for new drivers or update drivers using HP Support Assistant, but everything is up-to-date.

  I was looking for hot key factors in the page of HP drivers for my product but could not find any keyboard, drivers or software related shortcut keys.

  any suggestions?

  Thanks in advance,

  Marco

  Hi, Marco:

  The system of the event utility is supposed to get the Fn keys to work.

  Details:

  This package contains the HP System Event utility for the laptop models running a supported operating system. HP System Event Utility allows the special programming function keys.

  File name: sp70439.exe

  You can find this file in the Software - Solutions section of the driver for your model page.