3065dx dv7 - Win7 - BIOS update fail with cannot check the platform ID

Similar Questions

• Satellite L750 - BIOS update failed with error check

  Hello

  Update the BIOS to the L750 failled with an ERROR "CHECK". I downloaded the update to the BIOS again and got the same error.

  I wanted to submit a support ticket to do support technical namely that the BIOS update does not work, but low and behold, the creator of support ticket does not accept my model number/number combination.

  Thus, apart from picking up the phone, how can I get a message to Toshiba?

  See you soon

  Hey Buddy,

  May I ask why you are trying to update the BIOS? Do you have questions?

  As you probably know updated BIOS is always somewhat risky because it rewrites the ROM module and if anything goes not the ROM module can be destroyed and you are not able to start the computer. So this update should be made only if you have problems with the computer, otherwise forget it please.

  Remember: never touch a running system! ;)

• Inspiron 5749: BIOS update fails with the error 'Dell id does not match ".

  Hello

  I'm trying to update the BIOS of the Laptop Inspiron 5749. I downloaded the update file 3443A 07. EXE from Dell support website, where the update is supposed to be compatible with my system:

  -Dell Inspiron 3443/3543/5749 system BIOS;

  -Version A07.

  -Pull out the date 18 November 2015.

  I tried to install the update by using the utility to update the BIOS available in the start menu (after pressing F12). The update failed with the error message "Dell id does not match" or similar.

  Running the update of the session Windows don't seem to have any effect either.

  It seems that the update is only compatible with Inspiron 3443.

  Where can I get the update of the correct BIOS for my laptop? Any help is appreciated.

  The problem has been resolved by a motherboard replacement. Thank you.

• BIOS update failed with the Satellite A210-17Z

  I was asked by Tempro to update the BIOS of my laptop Satellite A210-17Z.
  I agreed but the laptop turns off before completing the update of the BIOS. As a result, I can no longer boot my computer.

  Looking for a solution on the internet, I have read that there is a possibility of creating a crisis recovery disk. I tried to do with the Phoenix crisis package, creating a crisis with a disk recovery disk and so on.

  When you try to Flash the BIOS and the start-up of the machine, I was pretty convinced to succeed as the system did start reading the disk for about 2 minutes... but nothing happened.

  I would like to know if anyone has experience and advice to help me recover my laptop.
  I was told that I should try with the original version of the BIOS (the one I got when I bought the computer) but I do not know how to find it because I don't know what version I had at the beginning.

  Hello

  To be honest, I think Tempro is the worst app Toshiba :-(that prompts users to update the Bios and after failure of the Bios. In this forum, you can find numerous threads about the failure of the Bios. He recommended to contact the ASP (SAV) to reflash it. You can read and ask other users how to recover the Bios Phoenix:

  http://www.theeldergeek.com/forum/index.php?showtopic=21209

  Good luck!

• Install Internet Explore fails with "cannot verify the integrity of the update.inf."

  The rest of the message was verify that the cryptographic service is running. It is not the case. I tried to remove password points that automatically in the connection tab, and then start the service, but this attempt fails. When I try to start the service, I get the error message that the account specified for this service is not the same as the account specified for other services running in the same process.

  I don't know how it happened or what to do about it.

  I was not able to start the service, as described above. However, I was able to solve the problem by checking the box system account log in space in the tab. This allowed me to start the service.

• Satellite C660 - BIOS Update Failed, need help restore the BIOS. BAK file

  Everything by updating the system BIOS froze in step 7 to replace the code of the BIOS, needless to say that the laptop does not start because the BIOS is now corrupted.

  I have the BIOS. BAK but need advice on how to restore the BIOS. I copied the BIOS. BAK on a key usb and it connected to the laptop computer and then powered on the system (now I tried the F, F2 key together). I can see the usb key will Flash initially but is not, clearly, progressing with the restoration.

  I hope someone might be able to advise the use of the BIOS. BAK file to restore the BIOS.

  Unfortunately I cannot help you with this but check it please this interesting thread - http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• BlackBerry software update failed Smartphone, cannot use the phone, but can attach to the computer access to the Internet.

  How to fix the phone. Software of office says "cannot communicate with the device.

  Hi and welcome to the Forums!

  Good job on the recovery! But all is not lost for your data. If you did the update via your PC, then in the early stages of the process should have been a backup of your data (assuming you do not defeat this feature). If you're on a PC, then look for in your entire hard drive to a file with the extension of the IPD (*.) IPD)... check the date and time of the results... created more recently is your best candidate and if all goes well, it was created at the time you did the update. Use this procedure to restore this file:

  • KB10339 How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file

  If you use a MAC, I don't know how he does things, but maybe this KB is useful:

  • KB18776 Back up and restore BlackBerry smartphone data on a Mac using BlackBerry Desktop Software 2.0

  If you performed the update OTA or otherwise circumvented the backup data, then you are indeed no chance.

  Good luck!

• I have thunderbird 24.5.0; I try to install lightning 2.6.5. Fails with "cannot edit the necessary file. OS is win 8.1

  Information about the supported spoke on the decompression of the xpi files. All I want to do is to install an add-on. I tried "extra everything" and it failed. I need the very explicit instructions on installing this add-on, please. This shit should not be difficult...

  This sounds like a permissions Windows 8.1 user problem. I have installed Lightning in TB on Windows XP, 7 and various flavors of Linux with no problems at all. I do not use Windows 8.

  Has he asked permission to make changes to the computer? Have you tried to do this install with administrator privileges? When I fall on installation issues, and it is any program, not just TB, it's because I try it on the computer at work where the IT Department controls what simple end users are allowed to do.

• Angular 2 http.get () fails with "cannot resolve the host name.

  I am trying to get 2 angular (well, ionic 2 actually, but the call failure is part of the kinetic moment) to shoot some json from the web. My code works fine on iOS or Android (via Cordova), but fails on any call http.get () on 10 of BlackBerry. Initially, I had problems because I did not in the whitelist the URL I was trying to download, but after whitelisting now runs the get call, but always fails. The error message "cannot resolve the host name.

  Does anyone have an idea why angular is unable to resolve an external host name when running on BlackBerry 10?

  Never mind... my bad. I encounter this problem when running my Ionic/angular application on a simulator. For me to get always consistent on many simulators BB10 different IP addresses I've run, rather than to allow VMware Player feeding the DHCP server (because it does no reservations of IP), I run a TinyCore Linux server on the same virtual network as simulators, just so that I can use DHCP on the instance of TinyCore instead Allowing no reserves. Unfortunately, I did not complete the configuration of TinyCore properly so nothing on the virtual network becomes a valid gateway or the DNS server list to access the outside world.

  When I run my application on my Z10 physics, it works fine.

• My pavilion g7-1070us ran hp assistant but bios update failed, I can do the update manually?

  I ran the updates of the hp Wizard recommended this morning, but the failure of the update of the bios.

  the update can be done manually?

  Hello

  Please find the following steps might help you solve the problem.

  Use the following steps to manually locate the drivers updated HP software and hardware.

  1. Go to the web page software downloads & HP driver for your model.

• Photoshop CC updates fail with DF045

  My Photoshop CC updates fail with U44M1P7. The error log shows a number of files corrupt with DF045, which suggests that the application should be reinstalled. What is the method correct to do with CC without losing the settings or causing problems of account?

  I will suggest to uninstall the Photoshop CC and completely clean the CC in Photoshop using creative cloud cleaning tool.

  You can download the CC cleaning tool from: http://www.adobe.com/support/contact/cscleanertool.html

  and clean reinsall phothshop CC with the help of Creative cloud and then try to update the application.

  Please let us know incase if you are still experiencing a problem

• Satellite L40 PSL48E - BIOS update fails on VISTA 32 bit SP1

  The 2.0 with latest downloads BIOS update failed.

  After adjustment of the rights of the user and Disabling UAC is remaining the following command line error:

  C:\TEMP\BIOS>winflash.exe P20B200. BIN
  Cannot copy the BIOS image. (File name error?)
  C:\TEMP\BIOS >

  No idea how solved it, file name is correct?

  You unzip the package to update the BIOS first?
  It is very important that the BIOS package will be unpacked first.

  Then, you can update the BIOS the winflash.exe execution.

• Windows Update fails with error [error number: 0x800A0007]-which is not listed

  Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system

  The other post:

  Thank you for your reply - but the problem persists - this is mopre complete info.
  The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
  Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
  As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
  Also your "Mr Fixit" was performed several times, but nothing changes.
  Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
  This is what is happening in the process of updating before it fails:
  Keep your computer up-to-date
  Check to see if you need updates for Windows, your programs, your hardware or your devices.

  Get updates of high priority (recommended)
  Select among the priority and optional updates for Windows and other programs

  ... and it does not matter if I say "express" or "custom" - headed then:

  Checking for updates for your computer...

  but fails after a few seconds with the same message as follows:

  [Error number: 0x800A0007]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  -However, it is the State of the system for more complete information for you:
   
  Name of the operating system Microsoft Windows XP Home Edition
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  MISCHU06BLUE system name
  System manufacturer Compaq Presario 061
  ED865AA - ABA SR1610NX NA540 system model
  System Type X 86-based PC
  Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  MISCHU06BLUE\Compaq_Owner user name
  Time zone Pacific Daylight Time
  Total physical memory 1 024,00 MB
  Available physical memory 468,50 MB
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 1.51 GB
  Paging file C:\pagefile.sys

  Please get us some help to solve this problem.
  What else can I provide?

  I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?

  [This applies to your recent 'me, too' answer to another thread.]

• BIOS update failed - Dell Precision M4600

  I just got a used M4600 and the currently installed bios is A08. When I try to update to A16, it restarts, said it is updating the firmware, but fails at 0%. It gives no reason and no code error I can say. Thanks in advance for any help you guys can provide.

  Is NOT the issue! There is nothing wrong with motherboards M4600 se.

  Everyone tried to find why when you attempt an upgrade of the BIOS, the system fails immediately with a "BIOS Update Failed" basis and any specific error code or more explanations. The answer is in the PDF below--that is the message displayed when the BIOS authentication will fail!

  Just look for the Firmware Signature Dell's "feature" that was introduced in a number of laptop including the M4600.  Doc PDF to download. It is a feature introduced by the NIST requirements.

  In a Word, they changed the way BIOS authenticates a BIOS file before he will use it to update the firmware BIOS & CBS. The M4600 is in the list of "Legacy Systems", where it was introduced. Basically, these systems do NOT have the Firmware of Signature When produced.

  Version A04 introduced this feature. After you have that installed, you will have an option to activate the requirement of Signature of the Firmware (default is). Once activated, it cannot be disabled!

  The problem starts in worm BIOS A08. Something in the code is wrong. Because on some M4600s, it updates the BIOS AND activates the requirement of Signature of the Firmware. After that, the system will authenticate ALL the other versions of the BIOS, so you will NOT be able to upgrade past version 8!

  I got many, many systems for a company. I'm currently sitting on 33 (Yes, that many) M4600 with this exact same situation!

  An exchange of motherboard does not correct the problem. It is to give you a new BIOS chip to tinker with.