Satellite L750 - loss of function key FN

Similar Questions

• Satellite C55-A5310 - special function key does not

  I'm presenting the same report that I sent in support but repost it here in case where I do not get a useful solution.

  Yesterday, I reset my Toshiba Satellite C55 A5310 (Part #PSCF6U-0EF066 Serial #9D362065Q). It was the factory reset, then had 10 Windows reinstalled automatically. After the reboot, my special function keys were set back from the normal function of F1 - 12 and didn't find any way to change. Toshiba parameters have been removed after the reboot (not my fault), so I searched in my BIOS settings, but don't found no available keyboard option, then reinstalled the possible necessary drivers to change their back (Toshiba Service Station and HW Setup). HW installation provided the ability to use any special functions or default settings Fn, but after choosing special keys, apply and ok - nothing has changed. I ran the program as an administrator and still no change.

  Being only 16 years with only a basic understanding of the functions of the computer I please ask no simple solution not requiring any sort of 'hacking' or adjust the permissions (that made me in the first place) or editing the registry. I'm too scared to do it again and ruin all my laptop operating!

  There should be a special function key setting in the BIOS.

  Installation of HW is for Win7. Replaces the Toshiba system parameters, you need Toshiba system driver installed for it to work. It looks like you may have installed Win7/8 drivers/utils in Win10.

• Satellite Pro A120-10W - function keys not working not not from the cloth of hard drive

  Hello

  I have a Satellite Pro A120-10W under Windows XP Pro SP3, and just had my hard drive erased, because of virus. Everything seems to work fine, but I can't use function keys to change the brightness etc. I looked in various forums help however most seem to give answers for Windows 7 or vista. 7
  Can someone please?

  Thanks in advance.

  Hello

  As you can see in other threads, you need special drivers/tools for the keys FN get their work because there is no standard Windows driver for these keys.

  In any case, you must download the common Modules like Akuma wrote. After installing the key should start working again.
  You can download the tools on the official website of Toshiba.

  If you have problems with the installation or it succeeded, just after a few comments. ;)

• Question on Satellite L70-B-119 function key

  Hello
  I have a Satellite L70-B-119 and recently after a trip abroad my function keys have been restored to use standard instead of the function which they have been defined in the. I tried to change it in the Control Panel, but nothing seems to work.

  Any help or suggestions please?

  Thank you

  To be honest I don't know what you're doing, man, but what I know is that you can switch between the standard and special mode.
  I send you a screenshot where you can change it.

  If I misunderstood your question please be nice and explain exactly what you mean.
  

• Satellite Pro A120 - error function keys not working and affected

  I have a Satellite Pro A120 PSAC1E-04Q00VEN.

  A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

  I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

  Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

  David

  Hey Buddy

  Go to the page of European driver of Toshiba.
  Select your laptop model and download and reinstall the tools and the following drivers:
  -Common module
  -Utilities for display devices Hotkey
  -Utilities
  -Wireless keyboard shortcut

  Check it out!

• Satellite A350-13 a - function keys does not work

  I have the Satellite A350-13. I installed Windows 7 for 2 weeks.

  The function keys does not work although I have installed the Toshiba value added package, which is responsible for the activation of the function keys.

  What the solution to this problem?

  > Function keys does not work although I have installed the toshiba value added package, which is responsible for the activation of the function keys

  Next to the VAP (value added package) you need to install the Flash Utility card support!
  Card Flash utility support controls the keys FN and not the VAP! But VAP is also needed.

  Good bye

• Satellite L850-1PD - utility function key will not

  Hi all,
  I have this device: Satellite L850-1PD with Windows 10
  Before, with the function FN + F2 or FN + F3 key Windows 8.1 it was ok, now with Windows 10 I have problems.
  I cannot increment or decrement brightness
  Help me!!!

  Good evening

  I also have a Satellite L850-1PD upgraded to Windows 10, it would seem that even if Microsoft has provided an update to win 10, Toshiba doesn't include not among mobile phones compatible with Windows 10 and does not release from updates. For me it does not work the buffer until it has fully started winning 10, and I do not use the touchpad.
  concerning

  Nickeyon

• Satellite L750 - loss of image on screen laptop and external to minitor

  No apparent reason, I have known a sudden loss of the image while working on my external monitor and a laptop L750 screen. The only solution seems to be to turn the computer off and then again, with the likely loss of recent work. Technical advice from Toshiba is the mode "Eve" in power to "never" options
  Presumably, this removes the possibility of invoking sleep manually via the Start button.

  Others are experiencing this problem?

  On my machine, I have the same settings, but sleep option is always available. Power management settings generally have nothing to do with it.

  You can switch mode keys FN sleep?

  By the way: is everything is OK with screen and display? Can you work with both of them again?

• Satellite Pro M - F5 function key is no longer working

  Hi all

  I had many years of happiness with my Toshiba laptop without problem. The operating system is Vista Home Plus.

  A year ago, my son fell of the machine, which resulted in the cracking of the display. In order to continue to use it, I plugged a keyboard and mouse alternatives and linked to a flat monitor.

  Using Fn + F5, it worked perfectly, as a de facto for ages up to a desktop computer date relatively recently: the cable between the laptop and the monitor went off, causing the monitor goes into mode 'sleep'. When put back in place, the screen has not returned and I had persistent problems since then. Using the key F5 now has no effect.

  Points to note

  -as long as the machine starts, the external monitor displays usual text, but when the Windows logo appears, it restores the standby mode and continues to the portable computer to boot correctly.

  -When I boot in safe mode the key F5 perfectly functions

  -J' cured the problem previously by starting in safe mode and restore to a checkpoint taken a few days before. This is a temporary solution, because whenever the computer is turned off, it happens again. What is interesting, however, is that he always seems to have been a recent automatic Windows Update downloaded when I look at the list of recent system check points and what triggered their!

  Get completely tired of it now. Any help much appreciated.

  CB

  Hello

  It's really not easy to say what the reason is for this problem, but it would be interesting to know which laptop, you have exactly.
  You can add this information, please?

  Anyway, for now I would recommend to update the display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before you start the update BIOS close all background running, also your antivirus and firewall programs. You must be logged in as an administrator.
  In addition, I would recommend removing the old display driver before installing a more recent. After removing, restart the laptop and clean using CCleaner. Restart and install the latest version.

  I hope this can solve your problem and by the way: you have installed SP for Vista?

• Satellite L550-207 certain function keys not working not

  Hello

  I read a lot about this problem, but don't got no solution for mine: all keys except F8 funtion (wireless) and F9 (toggle touchpad) work very well.

  Already insalled VAP - reboot - and memory card Support utility Flash, doesn't seem to help.

  I use Win7-64 bit (with latest updates), most new bios, firmware, and any new version of all toshiba products pre-installed.

  Any idea help?

  Hey,.

  FN + F8 to disable or activates the wireless network card and FN + F9 control touchpad functionality. So, if all other keys work, looks like you forgot to install the driver WLAN and touchpad. Have you installed them?

  All the drivers and tools you will find on this page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite L650 - Power Touchpad function key

  Hey, I recently had a Satellite L650 and had no problems until yesterday. I'm unable to toggle the touchpad with the button on/off button located above the button of the mouse in the L650. I tried to turn the touchpad by using the F9 key and it works fine. But I can't with the power button.

  Can someone please help me on this? Thank you!

  Hey Buddy,

  If you haven't noticed this problem until yesterday, I would advise you to restore the system to a previous point. Maybe you have installed or uninstalled several main structural factors or tools and so he doesn t more.

  If that doesn t work, try to reinstall the package of added value and the touchpad. The two you can download on the Toshiba site.

• Function keys do not work on satellite Pro R50 - B

  Hello

  I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

  If anyone has had this problem and how can I fixed that

  Thank you

  Dave

  Posted by david radish
  

  Hello

  I've owned only my laptop a few months now and have not been able to find why my "key service" do not work

  If anyone has had this problem and how can I fixed that

  Thank you

  Dave

  I have a satellite Pro R50 - B preloaded with Win 7 Pro.
  On the bottom row of the keyboard the second key to the left is a FN key.
  Press and hold the FN button active the function keys on the top row.
  I think that's how its supposed to work.
  If you cannot use the function keys, it could be linked to the FN key.
  Regs
  Nev

• Satellite A350-13 function keys a Windows 7 64 bit does not

  Hello
  I upgraded my new laptop Vista Win7 64 bit, however the function keys do not work and the function keys that display at the top when you press FN doesn't show any more. I installed the utility and value added package but without success. Any help is apperciated.

  Note to the Toshiba team:
  Why don't you pack all the necessary drivers and software in one package after their test, based on the model of the computer in my case Satellite A350-13, for example you could make a package for another Win7x64 to Win7x32, etc., instead of letting spend US days to understand what to install and where to find them and if it will work or not. Waiting for your comments.

  Concerning
  SAHM

  Hello

  You must install the Flash Cards in addition to the VAP support utility!
  The utility Flash card support are in the area of Satellite L500 driver for example.
  After installation if Flash card support the utility unit is restarted once more and then check the functionality.

  Welcome them

• S50-B-15N issues satellite keyboard/Trackpad / function key - win 10 improvement

  I bought a Satellite S50-B-15N a few months ago, who came with Windows 8.1 and decided to do the upgrade of Windows 10 about two months ago. Initially, the laptop worked well but in recent weeks, he had various issues with the keyboard, trackpad, and function keys.

  Keyboard: Sometimes the laptop starts up and the keyboard detects no input. A few reboots solves the problem. If I hold the BACKSPACE key to delete several characters as a single character is deleted on one-click Rollback, I can't keep him down quickly delete several words.

  Trackpad: The same for the keyboard sometimes at startup it works everything simply. I have to use the keyboard to access devices Manager where I must get back the driver trackpad for her to start working again at the next reboot.

  Function keys: All the keys of the row from the top on the laptop (brightness, volume, stock selection, etc.) do not work. I am able to hold the "FN" key and select an F key, like F5, but other keys are completely insensitive.

  I tried reading the forums for solutions and I went to the page of the driver of Toshiba and installed all the drivers for Windows 10 for my laptop, so far, nothing has worked. Is that what I can do to make the laptop works properly with Windows 10?

  I have a similar problem. I had the same Toshiba model and bought in August. Not sure when the new driver will be released. If anyone has an idea how to solve this problem?

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...