Problem trying to recover from a Rescue & Recovery DVD.

Similar Questions

• System refuses to boot from HP System Recovery DVD, or any other bootable DVD...

  Dv6915nr HP won't start upward from any bootable DVD, including all of the HP Recovery DVD system. It is not a problem boot from CD however. The trippy part, it does not start out of external optical drives with DVD either, only the CD. Please notify.

  My idea is to copy all the files from my HP System Recovery DVD on an external hard drive and start over. Or I should rethink that?

  Thank you!

  Yes, I just read a thread where you posted a few comments on this machine. Regarding the problems of DVD player, this seems to be common on the same machines that end up needing a new GPU ball so I tend to think that it has something to do with the mother/controller card. Previous DV series with Nvidia problem generally lost WiFi, later models have problems with CD/DVD player.

  I didn't know mention you that your F11 to turn key to start hard drive partition recovery work?

• Trying to recover from windows 8 for windows 7

  I was in windows 7, then I upgraded to windows 8 and now want to recover but I didn't recovory files, so I bought recovery CD the instructions say to put the drive to turn the computer off and then back under the crib of recovery appears and you follow the instructions. But he does nothing and continues to the normal windows startup screen 8.

  Well none of your guys technique really worked, but I thought about it, if anyone has this problem simply write to me

• Trying to recover from a corrupted registry.

  Follow the directions here: http://support.microsoft.com/kb/307545 and now I have a new problem. I did just like the directions say. I deleted the registry files existing and then copied the registry files to restore the system in the C:\Windows\System32\Config folder. I typed "exit" to exit the recovery console.

  At this point, the computer proceeded to reboot... exceeded the screen where Windows XP then care received it!

  lsass.exe system error

  An invalid parameter was passed to a function or service

  So I clicked ok... now he's trying to restart again and again, which gives me this message:

  lsass.exe system error

  When you try to update a password the return status indicates that the value provided as the current password is not correct.

  What now? Any help is appreciated, thanks

  Hello

  You can view these methods:

  Method 1:

  Warning: We recommend not to interrupt the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. Security, you can back up your data before using check disk drive.

  Use the drive control as follows:
  1. click on start.
  2. in the search box type 'cmd' and ENTER. Right click and select "Run as Administrator".
  3. type at the prompt in the command CHKDSK/p and press ENTER to scan the drive.
  4. type CHKDSK C: /F /R and press ENTER to repair corrupt sectors if there is.

  NOTE: The root drive must be C: and drive can schedule a task to start the system, if this is the case, press on is to schedule a task, and then restart the computer to run chkdsk.
  When chkdsk is finished, boot up to the desktop, and then check.

  You can check the link below for more details - mentioned
  http://msdn.Microsoft.com/en-us/library/ms793989.aspx

  Method 2:

  You can perform the upgrade on site that may help you solve the problem...

  How to perform an upgrade on the spot (reinstallation) of Windows XP
  http://support.Microsoft.com/kb/978788
  

• Security update problem - trying to update from McAfee!

  try to install McAfee 2011 3 users Total Protection with installation CD.  After spending the last 4 hours online with them, they claim I have windows update problem - shows up in the history as: for.NETon of a security update windows XP, windows Server 2003, windows vista, windows 7, vista windows 2008... KB2160841.  Finally, they said that the problem of 'failure' to be fixed through windows before my McAfee can be updated? !!! Help!  already four hours online trying to fix! :(

  See Andre.Ziegler response to a previous post, involving the KB:

  Error: WindowsUpdate_00000002 when installing .NET Framework 4 (KB2160841)

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/07e67bc5-1841-4972-Bac4-7a1d81dba8e7

• trying to recover from a bios flash

  need old bios of your laptop to the hp2000 downgrade to windows 7 pro 2c29wm.

  I did update the BIOS (F:34) after installation, computer wouldn't read the installation disc 7 of victory. Looking deep inside, I found articles telling me not to do the BIOS flash on my HP 2000-2c29wm. It read win 8 HDD, I pulled out. The new disk it would show there, he would let me boot from Win 7 cd to install it. The old BIOS was (F:24) tried to roll back to that one, (I called him old BIOS) win + B and the market did not work. Thanks for your help, I have now...

  Trapper714

• Trying to recover from a disaster

  It is difficult to explain... the entire chain of disasters, largely due to bad practices. I'd appreciate a lot of help
  
  We (really, we had...) a server Oracle 10g 10.2.0.1 6 databases running on it. We did backups RMAN bands to each other using Symantec Netbackup. The script was like this:
  
  RUN {}
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  BACKUP %
  FORMAT ' bk_u % u_s % s_p % p_t % you
  DATABASE;
  SQL 'alter system archive log current';
  OUTPUT CHANNEL ch00;
  # Backup all archive logs
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  FILESPERSET 20
  FORMAT ' arch-s % s-p % p'
  REMOVE ALL ARCHIVELOG ENTRY;
  OUTPUT CHANNEL ch00;
  # Backup control files
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  BACKUP
  FORMAT "ctrl_u % u_s s_p p_t %t % %.
  CURRENT CONTROLFILE;
  OUTPUT CHANNEL ch00;
  }
  
  Last week the server crashed down, due to problems of phisycal on hard drives, and we could not get it to the top. Then restore the databases from scratch since the backup tapes that we have.
  We had the RMAN catalog on the same server database... so we lost too much and we can't use ir to restore.
  We cannot use the dbid because we don't know them and we cannot see them on the server.
  In order to obtain the control files of the backup, another way to restore of databases, we reviewed documentation and it says it takes to use the name of the control file. The control file name problem is the same in all databases, so RMAN always return the last database saved file.
  Perhaps the first thing to do is to restore the database with RMAN, but I don't ' know if it is possible in this situation.
  
  To will be appreciated. Thank you very much

  Hello
  Now, I understand your question. It seems that the format for the controlfile doesn't generate the same name.

  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 jul 10 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 9175040 Jun 09 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 8650752 Jun 09 12 ctrl_us_pt:------.
  -rw - SYSTEM SYSTEM 7340032 Jun 09 12 ctrl_us_pt:------.

  You can try to restore the controlfiles from backup items.
  as:

  RUN {}
  ALLOCATE CHANNEL ch00 TYPE 'SBT_TAPE ';
  RESTORE CONTROLFILE to ' / tmp/test_1.ctl ' to 'bk_uh9mh1p66_s553_p1_t756081862 ';
  OUTPUT CHANNEL ch00;
  }

  Only songs that contain the system01.dbf will have a backup controlfile so (if controlfile autobackup is off) so try several pieces.
  Here some results a test of a bunch of restoration by using the above script.

  If the piece has no controlfile:
  - - - -
  From restoration to 19 - AUG - 2011:15:51:40

  channel tc1: restoring controlfile
  output channel: tc1
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command to 2011-08-19 15:53:28
  ORA-19615: some files not found in the backup set
  ORA-19613: datafile 0 not found in the backup set

  - - - -
  If the room contains a controlfile:

  From restoration to 19 - AUG - 2011:15:55:03

  channel tc1: restoring controlfile
  channel tc1: full restoration
  Finished restoring to 19 - AUG - 2011:15:55:18
  - - - -

  Kind regards
  Tycho

  Edited by: tychos August 19, 2011 15:57

• Cannot start windows and recover from one key recovery button.

  
  

  Thanks for your suggestion.

  I followed these steps and my windows starts successfully.

  http://answers.Microsoft.com/en-us/Windows/Forum/windowsrt8_1-system/unable-to-boot-Windows-and-Reco...

• Satellite A100: Recovery DVDs would not work

  I'm trying to recover from the State factory, and when I boot on the dvd, it give me and error.
  is there anyway I could get this to work?

  Hello

  May I ask what is the error message appeared?
  This would allow to know what s wrong or why it s not possible to run the install from the recovery CD.

  Have you tried to format the HARD drive?
  Did you use the right recovery CD?

  Please post more information!

• l9n40ea: recovery dvd

  I start boot device error not found difficult disk (3FO) .soln of the problem

  I'm not buying the recovery DVDs. For the computer laptop hp-r205nx. pls order the recovery DVDs.

• recover from the recovery partition

  I found several entries by searching in the forum, but nobody seems to be similar to my problem:

  I want to recover my windows vista system partition using the partition recovery on my T61p.

  It worked very well for me last time. But in the meantime I installed Ubuntu which was installing the grub loader, I think that what causes the problem all to rewrite the mbr.

  By pressing the Thinvantage key while booting does not show me the usable entries. If I boot from the Thinkpad - Recovery Boot disk iexpect only after pressing 'next' linux partitions and data will be deleted also.

  But especially as I could finally recovery... "Select the partition you want to use as the system partition" or another message like this.

  I remember, I was delighted when I saw this message. Because at the time, I was doing this I was expecting something like that. But today, that would be great, I don't have to reinstall Linux.

  Can you please tell me how I'm going to continue?

  Thank you

  For 3 or 4 days I'm looking a solution for my problem.

  I tried many things and spent a lot of time reading about similar issues.

  Windows Vista Ultimate on my T61p is not able to upgrade to SP1. I did it via ThinkVantage System Update, Windows Update function function and I downloaded the SP1 of Microsoft.com.

  Meanwhile my games installed do not work, I reinstalled them and then got an error message like: ereg.exe does not work.

  Installation completed then and I got the same error as before, at the start of the game.

  I had a serious accident before 4 months and I spent all the time in hospitals. My only satisfaction now is my new T61p and I don't get to work.

  PROBLEM:

  Maybe I did something wrong before update so I tried to use the recovery feature to set windows to the same status as when I got the laptop.

  I tried using the CD Boot Vista added, disk 1-c and the last c. I also tried using the recovery partition which I did not have to work when I started this thread.

  During this time I installed the rescue and recovery 4.2 and now he got the correct menu entry. When I select this function (F11) starting the computer was 'normal' and I had the selection of GRUB menu...

  I also found a scandiskpatch.exe which should correct some problems of RnR using Vista and 4.2 RnR. But when I doubleclick on it, I get a message that my computer do not have good condition for the correction of program (or something else, I use the German language pack.

  I want to restore my computer, and then try to update and if this doesn't work I still will have to find a solution for this.

  Please help me with this very annoying problem.

• p6210f crash, unable to recover from a previous date or access system recovery

  Hello, I have a HP with Windows 7 Home Edition 32 bit p6210f. We have done only recommended updates, added a modem, the router and the printer (all in buying there are almost 3 years).

  Our computer had been freezing so I ran Norton and it said we had a Trojan horse (I don't remember the details for the moment) the virus which, according to the web, have appeared around August 2012. Once I discovered this, I went online to find a solution like Norton said it took a manual removal. It's freezing, close and gives me the blue screen crash dump to avoid additional damage when the computer starts. I tried to find the computer from an earlier date (started with the oldest date and working current) and it gives me an error that the system recovery did not complete and it is usually followed by a crash. I tried to access the recovery files to put them on a USB key or make the recovery disks, but then he tells me that they are not available, even though I know they are there. Once again, this message is usually follow up with a message from blue screen crash dump.

  I know that the computer is on the older side, but we use to surf the web and now my son needs to do her homework, so I need to get back to work. Other viruses and errors, the computer runs generally very quickly and don't usually get us any errors or have questions so I think it is worth recovering it.

  Here are the specifications of your desktop HP Pavilion p6210f. According to the specifications, the computer has been put on sale about 3 years ago and came from the factory with Microsoft Windows 7 Home Premium (64-bit). Please read this HP document titled ""looking for recovery discs?' for more information on 'Recover your computer without recovery disks', 'Creating recovery disc (or USB storage device solution)' and 'Order of the recovery disks from HP in the United States and the Canada'. " Since you say that your computer is infected by a virus, Windows recovery and/or create discs of recovery may leave the intact virus or reproduce it. Try to turn on the computer and immediately tapping the "F11" key and about once a second later until the computer starts in the recovery partition. If it fail to boot into recovery, your best bet is to order a 'clean' set of discs of recovery HP or third-party provider ComputerSurgeons.com

• have two different computers and have problems recoving from hybernation. Locking the system

  Original title: recovery of hybernation

  I have two different computers MS 7 and have all two issues recoving from hybernation. They lock just straight up (do not accept an entry mouse or keyboard) and requir3e hard re boot. Goes 8 to 10 times a week.

  Hello

  (1) did you of recent changes to the computer before the show?

  (2) is the specific question at the opening of specific applications or programs?

  (3) you get an error message?

  You can perform the following methods and check if it helps.

  Method 1: Windows 7 hangs or freezes

  http://support.Microsoft.com/kb/2681286

  2 the resolution of the problems of method Performance

  Run the troubleshooter of performance, then check if it helps.

  Check out the link: http://windows.microsoft.com/en-US/windows7/Open-the-Performance-troubleshooter

  Method3:How to troubleshoot performance problems with sleep, hibernation and resume:

  http://support.Microsoft.com/kb/950686

  Note: The article remains valid for Windows 7 also if it is for Vista.

  For more information, connect to:

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Method 4: update video drivers card

  Check if the video card drivers are up to date. Install the latest video card drivers for Windows 7 on the manufacturer's Web site.

  Tips for solving common driver problems:

   http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  It will be useful.

• Please help, CD´s Rescue & Recovery recovery creating problem

  Hello.

  I always get the following message when I use rescue & recovery to create general recovery for my HARD drive.

  Until 4/2008 rescue & recovery has worked. The accepted page 44 doesn´t works not at all.

  "Resources required by this application are already in use.  Please try again when the other application is completed. »

  I Don t want to save the factory settings, but my HARD drive as it is right now.

  R61 Type 8918-5WG professional XP

  Thank you

  Fixed a problem. Just remove the old version of rescue & recovery completely from your HARD drive, before you install a new.

  Don t try to update with the new!

• Windows has recovered from an unexpected shutdown. Windows can check online for a solution to the problem. Problem event name: bluescreen

  Have had problems since 31/12/09.  Tech replaced Dell hard drive 14/01/10 because all software solutions did not resolve various problems, including the screen black and white letters indicating the mode without failure, or count down the regular opening.  System Restore has used several times, all software removed and replaced.  New Quickbooks reinstalled two times 10, it usually starts up quickly.  I was told not to turn it off, just let it run.  It automatically goes into sleep mode, it still does not start correctly.  Last message is that Windows has recovered from an unexpected shutdown;  Windows can check online for a solution to the problem.  Problem event name: bluescreen

  Windows has recovered from an unexpected shutdown.  Windows can check online for a solution to the problem.  Problem event name: bluescreen.

  Hi slopchop

  In the last few days have installed new programs? Or Anti Virus?

  Try the steps in this link and check:

  http://support.Microsoft.com/kb/958233

  http://support.Microsoft.com/kb/925810

  Also refer to:

  http://social.technet.Microsoft.com/forums/en-us/itprovistasetup/thread/0a28ca4a-82a2-465D-92ef-b471ae86c887

  http://social.technet.Microsoft.com/forums/en/itprovistaapps/thread/2e6991f4-7489-4D6F-A0B5-74de3d694d74

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.