Satellite L755-167 - screen does not not after upgrade to win 10

Similar Questions

• Satellite Pro C660D - screen does not turn

  I just got my Satellite Pro C660D back from repair (for a faulty fan), but the screen does not light when I start the laptop.

  She lights up on the front (and I can rotate the block number power sp that the keyboard works).
  Any ideas?

  I agree, I mean the laptop should work just fine after it has been fixed by ASP so I think that something was not right here and the technician must check this!

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Satellite A60-122: screen does not work - rest black

  Hello!!

  Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

  I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
  Thank you

  Isabel

  Hello Isabel

  I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

  I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

  Bye and let us know if you have more information about it.

• Satellite C850-1LK - screen does not work

  I got the c850-1lk for about 6 months and it is running Windows 8.1. I started it this afternoon and to navigate on the internet for half an hour when the screen turns off (power and wifi lights still on and could hear the fan running). I turned it and then turn on again, but the screen does not light even if I assume that the laptop itself starts well.

  The laptop was not struck and no physical damage has ever been done for her. The only previous problems were related to windows and the update 8.1 where he managed to remove the bootloader, but I managed to fix it with a bootable Linux disc then a complete reset of the system. Linux isn't there anymore.

  Any help would be greatly appreciated.

  It's really not easy to say what the problem is here. Remove the battery and press the power for 30 seconds. Connect the power supply only and start it again.

  The problem when you do this?

• Satellite U920T - touch screen does not

  The touch screen on my U920T satellite does not work from a few days back.
  I can't find all the settings for touch or any (except the touchpad) touchscreen device in Device Manager.

  I'm not sure exaclty when he started to malfunction.
  I installed the 8.1 Windows a few months ago and had a problem with the card wireless at the beginning, but the problem with the touch screen just appeard this week.

  What driver Toshiba control the touch screen?
  Is it a hardware problem or software?

  Hello

  To be honest there is no special driver to control the touch screen.
  The driver is provided by the Windows System.

  I think you should get the laptop back to factory settings but I fear that this will not solve the problem of Mr. smells like a hardware problem because I found some threads here in this forum about the dysfunction of the touch screen and especially the problem could be solved by service agents.

  By the way: before you run the recovery process try to configure the stylus and touch screen.
  Go to the control panel (Windows key + X-> Control Panel)-> Tablet PC setting.
  The first display tab contains options such as configure screen stylus and touchscreen.
  Here, you should be able to start the installation program and identify the touchscreen.
  The first option must contain 1 internal LCD
  At the bottom, you might find button to calibrate and reset the settings for the internal LCD.

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Satellite A200 - 23Q - screen does not show anything

  I am user and owner of a Satellite A200 - 23Q. The last few days, my laptop appears a certain problem. Its kinda does not. When I press the power button / stop, screens appears nothing, not even loading BIOS or something, even if the hard drive and power satellite (bottom left) turns on. Well, someone could say it is a screen problem, but this thing does not happen always, sometimes its working normally.

  I'm waiting for a response as soon as possible. Thank you

  P.S. This is my 1st post, so please see the patience and apologize for my weak English level

  Hi fotakis,.

  Which is easy enough to say what, exactly, is the problem: just connect an external monitor. :)

  If you see a photo on this subject, it seems to be only a problem of internal monitor. Maybe the FL inverter needs to be replaced
  But I think that in both cases (also when the external monitor shows nothing) you need professional assistance from an authorized service provider.

  The ASP can solve this problem!

• Satellite C850D-107 - screen does not work

  Hi, my first post here and need help please.

  I have the laptop above and last week I had 3 dead crushed inside my screen bugs, so I searched google and found some info on how to clean them.
  I took the screen and then carefully carried the front end, giving me access to the rear led? I cleaned the bugs and as I thought carefully back together, when I started the laptop backlight as does not I had thought broke I bought another exactly the same thing and put in, but its doing the same thing.

  The screen works but no light, so, any help would be great. I know there is no converter in these so what could the problem perhaps, cable the screen? I can't help LOL.

  Thank you, Wayne.

  > The screen works but no light
  I guess the backlight module does not work. Now quite sure if you get a defective screen or perhaps display isn't compatible/certified for this unit but the fact is that the LED backlight are simply connected with a LED backlight cable and there is no other modules which would impact on the functionality.

  So I think that you should simply try another display unit

• Satellite M40X - material works does not after re-installation

  Hello

  I just reinstalled my Satellite M40X with a WXP Pro. For some reason all the edge
  hardware does not work and it is still impossible to install it manually.
  Does not not to date:
  W - Lan (not shown)
  Controllers USB (although my usb mouse works fine)
  all of the controllers listed in the list of material

  I tried to download the drivers from the hp toshiba but nothing worked
  I could not find the drivers for the controllers in general.

  If you have suggestions please tell me

  Best regards

  Jan

  My first question; why don t you use the recovery CD?
  My second question: WinXP Pro contains SP2?

  Hey dude, or you have installed the fake software, drivers or / and updates are missing.

  First install all updates from Microsoft and secondly if you install divers manually do not forget that you do it in the right order!
  Did you check the Toshiba driver page exactly? You will find installation instructions. Have you followed this guide line?

  I thik you know now what to do.

• Satellite A100-225 screen does not load

  I have a toshiba A100-225 and whenever I start the laptop the screen will not load or show anything. Does anyone know what the problem with him?

  Hi Michael,

  The screen itself may be defective or the FL inverter has failed. Try to connect an external monitor to your laptop and see if you can get a good view. If the external monitor does not work then it is probably a problem with your graphics chip.

  Kind regards

• Satellite L500 - 19 X does not after all liquid spill

  Hello

  Newbie here, pleased to meet you all.
  I got a Toshiba L500 19 X, who has a problem, the keyboard does not work, at all.

  This happened after a spillage, or so I thought.
  I fixed a few laptops which have been submitted to liquids, but this one is different.
  In this case the laptop works brilliantly, is not a problem except for the keyboard does not.

  I have attached an external usb k/b and it works perfectly. I stripped the laptop down to the mobo and there is no sign of a reversal of liquid.
  I use a large magnifying glass to inspect the Board, usually find something blow over, but does not in this case.

  Nevertheless I cleaned the mobo and everything seems fine. But the k/b will not work.
  I am come to the conclusion that the problem COULD be an update of the bios of electronics, or corrupt.

  I have d/load the latest version of the Bios, gaining 2.10, but when I go on install it tells me that the current bios is equal to or newer than the one I have d/load and flash will not take place.

  I come hat in hand, to help if possible, and to see if anyone has had the same problem.
  Maybe point me in the right direction.

  The bad news is that there is a problem with the motherboard.

  Any help or advice would be appreciated.
  Thank you in advance.

  > In this case the laptop doesn't work brilliantly, is not a problem except for the keyboard does not.
  > I have attached an external usb k/b and it works perfectly

  So you have a great chance looks like the motherboard is ok and the keyboard controller also works.
  Why is this a BIOS problem? The laptop worked perfectly in the past
  Therefore, in my opinion you should contact point of service allowed in your country and should replace the keyboard.
  In my opinion the problem of keyboard internal

• Satellite P850 - 057 Webcam does not not after upgrade to win 8.1 pro

  the webcam was working fine until what the windows upgrade to Win 8.1 pro, the webcam is not displayed in Device Manager. BIOS definition OK, I could not find a driver for TOSHIBA WEBCAM HD for windows 8.1 pro, please help

  Hello

  The Windows 8.1 does not require driver external webcam.
  Usually, the webcam driver is part of the Win 8.1 system and so the webcam should be recognized automatically.

  To my knowledge, the webcam is connected to the USB controller. You have a few unknown devices (USB devices) in Device Manager with yellow exclamation?

  By the way: you would update the BIOS to the latest State and system of Toshiba driver to win 8.1 installed?

• Acer E1-510 card reader does not not after upgrade to win 10

  Hello

  Afer upgrade to win10, card reader does not work. I tried to install the drivers: CardReader_Realtek_10.0.10125.31214_W10x64_A and CardReader_Broadcom_16.0.2.8_W81x64_A, but without success. I installed an and restart and no results. Same with the second. I use the wrong version or what?

  When I go into Device Manager, I can't identify what is the card reader in the list, even before and after installing these drivers.

  

  Yes, Realtek site seems now.

  It was my first choice... we'll wait.

• Update of Pluging Manager works does not after upgrade

  I think I'm having the same problem as everyone else and I'm pulling my hair out trying to understand what is happening.  Let me first start of by saying that I am in no way a SQL DB, so I'm just Dodge my way through so far with no luck.  So far, that's what I did.  I was running ESX 3.5 U4 and vCenter 2.5 U4 with a server remote phyiscal SQL 2005 for VCDB & UMDB.  I upgraded to 4.0 vCenter and everything was fine.  Then I tried to update Update Manager.  He's been through, I managed to install the plugin Update Manager, but it is disabled and whenever I load the vSphere Client I get and error, "there was a connection to VMware vCenter Update Manager error - vcenterserver:8084.»  Unavailable temporarliy database or network problems.

  At the moment I have:

  VMware VirtualCenter Server Service set to automatic and log in under the same account AD as with the previous version.

  VMware Update Manager Service is set to automatic and log in as a Local System.  Update Manager service will not start if you use this account or any account AD.

  System DSN defined for the Update Manager and VirtualCenter with SQL Native Client driver.  Remote server entered correctly and I use Windows authentication integrated with the default correct database selected and everything else is default.  When I do a Test connection, I get a successful connection with the two system DSN.

  However, Manager of continuous update not working which VirtualCenter Server works fine and both of the DB is on the same remote server.  Just for fun, I tried to install SQL Express on the vCenter Server Server for the Update Manager and it worked.  However, I would use the same DB Update Manager that I used on the remote server.  I checked the log file, and that's what I'm after launching the vSphere client.

  Product = VMware Update Manager, Version 4.0.0 Build = 162871 =

  Managed implementation information configuration process

  Unable to get the module name to process 4. Error: 299. Ignoring the process

  Starting managed the java.exe process

  Starting managed process rdevServer.exe

  Monitoring process started

  Internal Manager of the tasks established demand...

  Handler created email alerts...

  Configuration manager created...

  Locking of entity manager created...

  vaCrypto initializing...

  Key responsible VALM C:\Program Files\VMware\Infrastructure\Update Manager\ssl\valm.key

  Health services manager created...

  Collector of statistics created task...

  Trace for all: false

  Record of integrity. BaselineComplianceStatusCollector: true

  Integrity.ComplianceStatusManager trace: true

  Record of integrity. DVSManager: true

  Record of integrity. ScheduledTaskManager: true

  Record of integrity. SessionManager: true

  Record of integrity. UpdateComplianceStatusCollector: true

  Record of integrity. UpdateManager.remediate: true

  Record of integrity. UpdateManager.scan: true

  Record of integrity. UpdateManager.stage: true

  Record of integrity. VcIntegrity.setConfig: true

  Record of integrity. VcIntegrity.setNewUpdateConfig: true

  Trace loaded objects.

  VcIntegrityPlugin Init

  Add reminder to Ufa Shutdown manager.

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  VcIntegrityPlugin Start

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  ODBC error: (28000) - [SQL Native Client] [SQL Server] Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON '.

  vim.fault.DatabaseError

  No. began

  Leave validate. Failed

  I don't know what that means or how to fix.  Any help would be grateful.

  Hello

  As far as I understand, you are using integrated Windows authentication. Can you please try to use SQL Server authentication instead of Windows authentication? Update Manager does not support Windows authentication when the database is on a remote computer. The database and the DSN system must use SQL Server authentication.

  You can also take a look at the following thread: http://communities.vmware.com/thread/212853?tstart=0.

  Hope this helps,

  Margarita