Similar Questions

• Satellite A60-122: screen does not work - rest black

  Hello!!

  Can someone help me please on a screen problem? I have a Toshiba Satellite A60-122 and when I turn it on the screen does not work. It remains black as if the power of the laptop was turned off. I tried to connect the laptop to an external monitor, but it still does not work. I have no more ideas of what can do to make it work.

  I already told to format the pc with the cd of restoration but without an image, it is impossible to do anything...
  Thank you

  Isabel

  Hello Isabel

  I'm not an expert, but if there is no image on LCD internal display and the external monitor, I assume that there is a problem with the graphics card. I think you should contact the customer Service of your country partner and let check the device.

  I also hope that the warranty is still valid and if something needs to be replaced they will do it for free.

  Bye and let us know if you have more information about it.

• Satellite C850-1LK - screen does not work

  I got the c850-1lk for about 6 months and it is running Windows 8.1. I started it this afternoon and to navigate on the internet for half an hour when the screen turns off (power and wifi lights still on and could hear the fan running). I turned it and then turn on again, but the screen does not light even if I assume that the laptop itself starts well.

  The laptop was not struck and no physical damage has ever been done for her. The only previous problems were related to windows and the update 8.1 where he managed to remove the bootloader, but I managed to fix it with a bootable Linux disc then a complete reset of the system. Linux isn't there anymore.

  Any help would be greatly appreciated.

  It's really not easy to say what the problem is here. Remove the battery and press the power for 30 seconds. Connect the power supply only and start it again.

  The problem when you do this?

• Satellite U920T touch screen does not work with Windows 10

  Hello everyone
  I've updated to win 10 on my laptop & since I've lost the ability to touch my screen, it now works like a normal monitor.
  I searched for several weeks on the net for a solution, but I realized that Toshiba does not care to solve the problem so any who found a solution? It seems to be a driver or software related issue to win 8.1 & 10.

  Hello.

  Even as Dr. Joe... I also upgraded Windows 10 lost touch screen and camera. I returned to Windows 8.1 and I still haven't get touch screen. I seem to have lost my drivers HID Touch Screen as well.

  Anyone have any ideas on how to restore touch screen drivers? I can't find them in the download section of driver Toshiba after hours of research.

• Satellite P100-386 - screen does not work after replacing

  Hello

  my laptop fell and the screen was broken.
  So I bought a new screen from ebay.
  The new screen happened and when I changed it was on mode 'sleep' and that it worked fine, but when I restarted it, the screen didn't show anything and blacklit light worked...

  Anyone know why?
  Is this a bios problem?
  What should I do?

  My laptop is a p100-386
  My old screen was LP171WX2 A4K7
  My new one is LP171WP4 TLB5

  > The new screen arrived and when I changed it was on mode 'sleep' and that it has worked well.

  Does that mean exactly? Did you replaced the screen while the laptop was in Standby Mode?

  If only the internal screen would be affected so you should be able to see something (home Toshiba BIOS screen) on the external monitor
  Can you connect the external monitor (2nd) to the laptop in order to check this?

• Satellite u920t - touch screen does not work

  Since I installed MS office 2013 the touch screen feature is not available any more in the system settings.
  Who can help me?

  Best regards Jürgen

  Hi Jürgen

  Which machine do you have?
  Have you tried to remove Office and test the functionality again?

• Satellite T110-107 - Reboot does not work properly

  When the power button is pushed to the power and wireless lights, fan whirs a minute then nothing more happens. If I remove the battery and leave it for 30 minutes then it starts fine when you push the power button. Currently abroad, but have access to the internet.

  Running Windows 7.

  Suggestions welcome!

  Hey Buddy,

  Since when did you notice this problem and have changed something on the hardware configuration?

  It is difficult to say why it happens but it must be a hardware problem, you still have it installed the newer version of the BIOS for Satellite T110? You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  But before you start the update, close all running programs (also AntiVirus and firewall).

• Satellite L300 - 1-5 - the screen does not work

  Recently, I encountered a problem with my laptop, the screen does not work.
  I tested my inverter of the screen and my backlight lamp to see that if that was the problem, but they both worked perfectly, I then tried the entire screen with the parts and that worked too. (I tried in my friends Toshiba Satellite L300 - 217)

  Then I looked around online and got told to try to connect my laptop to an external monitor, so I did and the screen didn't work there either. So now I'm stuck, I have tried everything even made sure all connections aren't loose etc but it still does not.

  Anyone know what the problem with my laptop?

  Thank you, Tom

  Hey Buddy,

  > connect my laptop to an external monitor, so I did and the screen didn't work there either.
  This means that the internal monitor is ok and the reason must be the graphics card or card mother herself.

  I guess for now, you get only a screen empty and nothing happens on your laptop?

  In this case, you should contact the closest service provider authorized in your country. Just get in touch with the guys and ask for help. They can check the cell phone and fix it! ;)

• Screen does not work on my Satellite L500

  My Satellite L500 screen does not work. I can connect the laptop to a monitor and use ok but the screen of the laptop remains blank.

  I did something to cause this?

  I don t think so.
  If you cannot switch back to the display of s for laptop using FN + F5 I m afraid there is a hardware problem.

  The problem with the display cable or show itself. Is the laptop must be disassembled and all this needs to be checked.
  You can contact Toshiba service nearest and ask for help.

• Screen does not work on Satellite L775-10F

  I turn on the computer and the screen does not work. Everything seems fine but the screen is all black.

  Nothings happening. I tried turning market and its still does not.
  I also tried to connect to my TV with an hdmi cable.

  What should I do?

  Connect it to the TV and wait until Windows 7 is fully loaded (you will hear sound Win) than trying to use FN + F5 several times. It may happen on the TV Office. Be sure you use the right settings on the TV (HDMI port must be enabled on the right).

  F nothing helps I presume the display can be defective then contact the closest service Toshiba and let them check your laptop.

• After upgrading RAM, the screen does not work on Satellite L30 - 105

  Dial up on laptop and screen does not work. Have updated the memory to 2 GB.
  This can be the reason of the screen works not? Have tried rebooting the system, but it helps t n.

  Hello

  Can you please tell us which laptop model you have? Have you noticed the same problem until you do RAM upgrade?
  What's on the new RAM? Did you buy a compatible?

• Satellite L50DT-A009 touchscreen does not work

  Hello!

  Tech total noob here, but I bought this model today.
  He had an upgrade of RAM 8 GB, made by the retailer.
  Other than that, standard bog.

  However, the touch screen does not work.
  We have had a look but impossible even to find all the tools for the screen.

  A massive Windows Update, had a quick look on the drivers, nothing.
  I was led to believe it is touchscreen, the demo model has been the touchscreen.
  Anyone has an idea why this does not work?

  Thank you very much.

  ETA: Sorry for posting the same question twice - ad on the old cranky computer since the new one is not playing ball right now!

  Post edited by: Lydia

  > I was led to believe that it is the touchscreen, the demo model was the touch screen.

  I found the page on record of this on the Australian page of Toshiba laptop model:
  http://www.MyToshiba.com.au/products/computers/satellite/l50dt/pskm2a-009005/specifications

  Indeed, the unit seems to support the capacitive touchscreen.

  Please check if the touch screen has been calibrated.
  Go to the control panel (win key + x Control Panel)-> Tablet PC settings

  You will find the first tab called display
  Click the Setup button to launch the Setup where you could point to the touch screen
  In the substantive area called display display options you could calibrate the touch.

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• my iphone 5 s screen does not work.

  my iphone 5 s screen does not work. Touch is responsive but display sows a lines vertical coloring...

  TNX for help

  Hello

  I suggest you contact Apple Support (mail service may be available) or make a Genius Bar reservation to have your iPhone verified and, if recommended by Apple, served (either under warranty or through paid repairs):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status:

  • https://checkcoverage.Apple.com/

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]