Satellite L850-13 q can not write DVD

Similar Questions

• Can not watch DVD after modernization of Windows 8

  I have a HP Pavilion m6-1010tx Entertainment Notebook PC and have upgraded to Windows 8 and can not watch DVD now.  What can I do?

  Hello

  Windows 8 does not have something like Windows Media Player integrated, but at this stage you can get a key for this free, the key will activate "Windows Media Center" for you:

  http://Windows.Microsoft.com/is-is/Windows-8/feature-packs

  Kind regards.

  PS it takes to wait nearly 24 hours

• I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer. How to replace this command?

  Silverlight.config.exe. appears again msg then causes a gel

  I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer.  How to replace this command?

  Hi JaphetMorales.

  (1) did you change on your computer before this problem?

  (2) what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can uninstall and reinstall Silverlight and then check.

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  See also:

  http://support.Microsoft.com/kb/977116

• Movie Maker: can not make dvd, unspecified error

  I made a holidaymovie with Windows Movie Maker 6.0, working with Vista Ultimate SP2 on a laptop Acer Aspire 9420. Got more memory (4 GB RAM). It has 20 GB free and the D-disk 40 GB of free space on my C drive. The original camera film is on an external hard drive. (Do not know if these things are important, but just in case...)
   
  I made a movie (68 minutes), I put the music on it and added some effects. Now I want to burn it to DVD + R (4.7 GB), but it does not work. An error message appears when the encoding (I don't know if it's the right translation in Dutch, it's "coderen") is 13.6%. The error message says: "can not make DVD, unspecified error. '
  The last time when I did a movie, I had the same problem and I solved it by cutting the movie in 2 parts. And I did the first piece gradually larger and at the end I managed to get the movie on a DVD.
  Now, I tried the same thing, but when I tried to burn the first part (34 minutes) on a dvd, the same error message is displayed, but now, at 27% (approximately).
   
  I already cleaned my computer, while I have more memory space. Last time, I changed the virtual memory, but that did not work.
  Who can help me?

  Some people have suggested it might be a problem with the Codecs.

  To see if there is problem with Codecs load MOVIE Maker and go to the tools /.

  Options / tab to check codec compatibility.   Do not delete the AVI file

  Compressor, at least not until you've tried without the other Codecs first.

  Windows Movie Maker and DVD Maker have enough similarities to make these interesting to read.  DVD Maker could actually be more tolerant and not so much, crash if you are able to use as an alternative?

  DVD encode - comes in at 98.9% burned, then fails
  http://www.windowsdvdmaker.com/forums/thread/136.aspx

  Vista - creating Windows DVD fails at 99%
  http://www.Vistax64.com/Vista-music-pictures-video/198083-Windows-DVD-Maker-fails-99-a.html

  When recording to the DVD format, you can get about 120 minutes of video on a DVD and approximately 240 minutes of

  video on a DVD double layer.

  You might need to equivalent or even a little more an amount of free space on your hard drive to serve as a working

  records?

• Why I can not write in the contact form?

  I use the widget simple contact form. Unfortunately, when the site has been uploaded to the server, I can not write in the form.

  Anyone have an idea why?

  Thanks for the reply,

  Angelika

  Your page uses a 3rd party widget that adds some javascript to try to block the right mouse clicks - which interferes with by clicking on the form in firefox. I suggest you remove this widget or by contacting the promoter to see if they have an updated version that works with the forms of the Muse in firefox.

• CS4, can not write a text

  I can not write a text on some jpg images.  Any help is appreciated.

  CS4 64-bit, 32-bit CS4 and elements behaves similarly.  I tried

  Windows 7(64bit) and Windows-XP, but the symptom is the same.

  After you open the jpg image captioned, I click on 'Text tool', then draw

  rectangle structure with the mouse.  The right pane indicates that the layer-1 is

  created.

  At this point, there is no cursor (caret) in the text box. Keystroke

  does not all the letters in it. I set colors and size of letter as

  visible.

  After clicking "move tool", layer1 indicator shows the text I typed.

  But I don't see any text in the text box on the image.

  Versions of CS4 11.0.1 and elements is 6.0 Japanese.

  The jpg file was created by my friend using a scanner. The image

  appears normally on these applications as well as the other image

  editing software.

  FastStoen (an image editor) and other software can write text

  on the photo.  Several photos he made behaves similarly, on the

  However, the photos that I created on my computer have no problem.

  I miss any setting?

  Thanks in advance.

  Tak

  (the file captioned, but extremely vague on copyright is attached.)

  

  Reduce the resolution at 300 PPI with resample uncheckedand try some medium-sized text on it.

• Satellite P30 - DVD-RAM drive will not write DVD

  I have a Satellite P30 - 145 running XP Home Edition with a carpet * a reader of DVD-RAM UJ - 831S. I am able to read and write CDs and read DVDs, but am unable to write DVD. In 'My Computer', the drive is marked as a DVD - RAM drive, but if I insert a DVD r or DVD R, the label changes to CD drive, and I am not able to format the drive, I just inserted.
  Clues as to what is happening and what I can do about it?

  Hello

  Since when is this problem here? Is your unit pre-installed with your own operating system or with the recovery image? DVD - RAM Driver Software V3.1.0.0 is also pre-installed correctly? Burning application you are using?

  Try to remove the drive from Device Manager, reboot the device and check if the drive is recognized correctly again. As far as I know that your device comes with fixed burner DVD Super Multi (Double Layer) and you should be able to create all formats.

  What is DVD format?

• Re: Satellite P500 of USA - can not read the local DVD

  Hello

  Sorry to appear such a luddite acquired but this laptop great USA from eBay.
  User manual appears to indicate that the player is going to adapt to the locality of the drives I want to play.

  Not had any luck with playback at all to this day, the error message 'not compatible' etc., any guy of suggestions?

  See you soon,.
  Michael

  Hi mate

  I think that the portable player s (optical disc) DVD region is set in the United States and therefore you can not read the DVD released for the European market.

  To resolve this problem, you must change the option of DVD region 2 region.

  My computer-> drive CD / DVD-> properties-> Hardware tab-> choose the CD drive / DVD-> properties-> DVD region

  Notes; You can change this settings ONLY 4 times. After that the parameters is no longer editable.

• Satellite Pro M30: How can I write on a CD 900 MB?

  Hello
  How can I write on a CD 900 MB, I use nero 7 and nero on what they told me I have to update my firmware CD writer questioned. I got satalite pro M30 and windows XP SP2.

  Hello

  I found this firmware on the Toshiba driver page:
  http://support.toshiba-tro.de/Tools/updates/DVD-r-RW-firmware/SD-rxxxx/frmwre-na.zip

  But I m not 100% sure if it works.
  You can also try to search the FW on the driver page.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

• Satellite L850 - indicator wireless is not off

  Hello

  I have the Satellite L850
  Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)

  When I switch the lan wireless off (using f12)

  the indicator doesn't turn off wireless!

  I have not found "the indicator wireless settings" on my system!

  any help please

  Thanks in advance

  Some models are delivered with Win8. Can you please send the exact model number? I just want to check the specification.

  Anyway, if you have Win7 when you press F12 can you see at the top of the screen flash cards?
  When you press FN + F12 you see option ON / OFF for the WLAN?

  Somehow, this question is strange to me. When you use the laptop with the settings, it should work properly.

• Satellite L850 - special function key not working not properly

  Hello world

  I had Satellite L850 bite of windows 8 64 (pskg8a-07f001) running for only 2 months.
  Only within this week, the special function key does not work do not, whenever I start the pc, I have to go into toshiba assist office then the function key, and then click ok, it will work.

  But the touchpad has been defined as licence also under keyboard setting was defined as special function mode. But don't know why every time you start the pc must go in the function key box, and then click ok.

  When I bought everything is ok, I can use the special function key to turn, up and down the volume and disable wireless... etc.

  Please notify. Thks a lot!

  Have a look here:
  Function key change to Satellite and Qosmio 800 series
  http://APS2.toshiba-tro.de/KB0/TSB2903E00000R01.htm

  You can use the traditional keys FN + F mode or just a F key mode.
  This can be enabled and disabled in the BIOS or the HWSetup

  In BIOS go to Advanced-> system-> the function mode button configuration
  This mode can be changed
  Also remember that the function button is activated too

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• Satellite L850-150: Webcam does not work

  Hello world!

  First of all, sorry for my English not good enough. I'm from the Spain and I bought a laptop Satellite L850-150 less last year.

  The problem is that I have not tried the webcam so far, and when I did, it does not work!
  When I used the webcam application, it is said: "it is impossible to start the webcam. Check the camera and restart the application or computer.

  I reinstalled the driver for the webcam, but it does not work still... you have any idea or solution? Thank you

  Hello

  What is the status of the webcam in Device Manager?
  Webcam is properly recognized?

  The webcam can be enabled and disabled in the BIOS.
  That's why I recommend you to check the BIOS settings.
  BIOS-> Advanced-> Configuration-> webcam system

  If his permit and if the webcam is properly recognized in Device Manager, I think that you must uninstall webcam once more.
  Then you must clean the registry using some tools like e.g. CCLeaner. It is a freeware software. By using this software you can remove some temporal files and can repair and clean the system registry.

  After this short cleaning procedure, restart the computer again, download the latest webcam software of the Toshiba page and install again. Reboot once more and then try to stars of the webcam.

• Satellite P10: The drive will not burn DVD

  Hope someone can help me,

  I have a Toshiba Satellite P10 and have just received some photos software, burning
  But my drive will not burn DVD, I try with discs DVD - RW which must work my laptop.
  What is happening is when it comes of the burn on the part of the disk of the process he starts, but it fails.

  I tried to burn it with Nero, but even if I burn OK on any CD discs with this software it will not work on DVD discs. It's really annoying because when the burning process it fails so that it makes the DVD - RW disc seem curupt and then my drive has problems mounting the disc to try a deletion once more.

  I have the Nero log file failed
  Done if it's any help to anyone.

  A big thank you Michael.

  Hello

  What about different DVD media? Have you tested the media DVD-R or DVD + R common?
  Have you tried different brands of DVD?
  I can't give you a properly answer why the drive can't burn your DVD - RW, but to my knowledge not every media is supported by the player.
  So I think you should check different DVDs.

• Satellite L850 - HD Webcam does not work

  Hi, I tried to get my webcam to work, but apparently not, I had a glance online but does not, so you are my last chance before you give up and buy an external one to send back to you. I'll try to give you as much information as possible.

  I've had this laptop since 21 August, I bought from PC World. It's a L850 Satellite with Windows 7 64-bit

  Initially, the webcam has functioned well, everything was great and I thought it was great.

  Then all of a sudden a few weeks, he just stopped. I had a small notification in the bottom left of my screen that says "USB device not recognized", Uh oh. Whenever I try to use my laptop says that it has one. For a few weeks, the camera would be ok, and then not ok, that would change. Sometimes I could use it, other times I just couldn't.

  I had a look in Device Manager, and there was no mention of "Imaging devices" as it was before. But there is an 'unknown device' in the 'Bus USB controllers' falling down, with a yellow sign above it.

  Here's what I've tried so far:

  Drivers - I have followed the advice of a forum and downloaded the latest apparent Webcam driver for Windows 7 64 bit. Excerpt on my desktop and ran the .exe. After pressing the Start button, it loads and asks if I am sure I want the program to make changes to my computer. I press Yes, but then nothing apparent happens. I expected a "drivers installed correctly" or something, but nothing happened, and the problem does not go far. I don't know if it was supposed to be anything, but eh. I downloaded a program called DevManView which allowed me to see all the features that were already on the laptop. My "Toshiba Web Camera - HD" was among them, so I took a peek at the properties. He said "disabled: no, connected: No. I came to the conclusion that it is connected, but for some reason my laptop any works just simply can not what it is.." Is there something I can do?

  BIOS - in the BIOS, the webcam is enabled.

  System Restore - is went to when the Webcam would have worked, but nothing helps, no change.

  Changes/webcam system changes that may have caused the problem:

  I have used what we call Fake Webcam, so I could replay videos more at my cousins through Skype, I uninstalled since all this. I've never used the webcam normally when I'm fake webcam, but then when I tried, it wouldn't work, so when I uninstalled Fake Webcam, he stated that no camera has been detected.

  I am at my wits end, I really want this thing to work, any suggestions?

  Best thing for you would be to make ultimate check and reinstall the recovery image and test the functionality with the factory settings. I know that this is a more radical method, but after doing this, you will see if the cam is recognized and registered properly or not.

  If the problem starts to be present again, I think there may be a hardware problem.
  What do you think of all this?