IOConsole update running logcat console EPCO MAF

Similar Questions

• Error, you must be an administrator to run a console session using SFC

  Original title: vista administor

  have windows vista Home premium and it may seem silly, but how to administer privileges. Am the only one on the laptop so I thought I got them somehow, but not so much that when I tried to invite her command of my I get the message: you must be anrat administor running a console session in order to use sfc. I checked that I really am an administrator and I think I did it to accounts but I'm puzzle with this

  Hello

  You right-click on command prompt and select run as Administrator:

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

  I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

  Hi Paul,.

  Have you tried to download an attachment after you turn off your antivirus?
  I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
  I would like to know what are your results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update running long after the system restore Image

  This is my 2nd try at why put Windows runs so long.

  I did everything that was asked of me in my 1st post.

  My last answer a question for me was on 19 September 2016.

  Which was a Monday.
  Then silence. I don't know if anyone can help with this problem.

  It is still ongoing.

  But at least informed me that it is not something that can be done.

  Instead of silence.
  The links below are to my OneDrive. Please let me know if there is more information.

  Operating systems: Windows 7 Ultimate sp1 64-bit

  Recently I reinstalled Windows 7 with a system image backup.

  He took my computer the initial installation of Windows 7.

  When I checked for updates that need to be installed in the Windows Update control panel there are not.
  So I clicked Check For Updates.

  Rental search automatically updates, run first for 3 hours. Once again for 8 hours. Then once more for 20 hours.
  Each control time for updates still worked and no updates have been downloaded for installation.

  How can I get updates for my computer, if check for updates is not download any?

  Sheilah

  systemlog

  SystemInfo

  Try the solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/Windows-7-update-solution/f39a65fa-9d10-42E7-9bc0-7f5096b36d0c

• Windows Update runs for a long time without finding update

  Separated from this thread.

  Hi men, I have a similar problem with update of windows 7.

  Windows Update runs long without finding updated and do not stop running.

  on the "windows Update" Panel, Windows shows no research update and no updates installed, while all are displayed on the history until the KB915597 on 21/06/2015

  I found on the web a lot of posts on this problem, but without finding a solution so far.

  On top the English is not my native language, that's why I'll be very interested if anyone, old or young to help me.

  Thank you in advance

  The application, system and information link system event log

  https://onedrive.live.com/redir?RESID=87673FD27CD1A063! 106 & authkey =! Diego-Uum6lCv4 & ithint = % 2ctxt

  Thank you Patrick for the update. Your message arrived while I was on vacation and it appeared just after your last post.

• Update for Windows 8 3 hours for 1 update running

  Original title: upgrading from windows running 3 gours

  Windows Update for windows 8 3 hours for 1 update running.

  Message says pc will restart in 1 day at the end of the important updates.

  Can't stop computer at all. Is this normal, don't have not had this problem before.

  Thank you.

  Thanks for your help.

  I wasn't able to get any information that you have requested. My Tablet has just shown the installation

  update message and another message that the tablet should be restarted the next day.

  Emilie! The next day, the tablet started up properly.

  If you can tell me where I can watch the update of windows in window 8, I'll get the information for you.

  Thank you for following up on this issue.

• EPCO MAF 2.1 is not installed Android sdk

  EPCO MAF 2.1 installed ok.

  The Android SDK tools installed ok with 21, Android 5.0 sdk x.

  EPCO sees it, all right.

  And then...

  Brand new Google 22, 5.1 Android sdk. I installed the new sdk and removed 5.0 x sdk via Google Tools.

  I also installed older sdk being my Tablet Android 4.2 physical x.

  The problem:

  EPCO insists on assistance from the sdk 5.01 deleted and can't even see any installed SDK later.

  Some screenshots attached.

  Thank you

  NAT

  To build applications of MAF, you need to version SDK & tools 5 Android (API 21) as specified in the matrix certification here. Once the application is built a deployment on a device, to the right, we support versions Android 4.0.3 &, this information is provided in the matrixcertification duration.

  Thank you

  Srini

• I have updated the Java Console and now have 6.0.20, 6.0.21 and 6.0.22 versions. How can I delete two of these versions of the plugins. ?

  Whenever there is an update for Java I downloaded it. Now, I observe that, in the Firefox Plugins, I have three versions of the Java Console. I know I can disable the two previous updates. How to remove these to appear in the Plugins folder. ? Please, I beg you.
  I don't want to end up with a series of Java updates that appear!

  You can uninstall (remove) the Console Java extensions, you don't need to run Java applets.

  See http://kb.mozillazine.org/Java#Multiple_Java_Console_extensions

• Updated, runs in background but the browser will not open

  Firefox automatically updated today, and I restarted the browser. Or at least tried to. the process runs in the background, but the browser itself will not open at all. I am running Windows 7, and it seems, in the bar of windows, as if its going to open, but it's fading. When I went to uninstall it said that it was still running. Stopped the process, uninstalled and reinstalled, but the same problem. Cannot use troubleshooting tasks because I can't in the browser at all!

  Is currently working with a secondary browser, which is fine, but I really want to back Firefox!

  cerulean1 wrote:

  Can't use any of the troubleshooting tasks because I can't get into the browser at all!
  

  Firefox does not start safe mode?

  1. Click round Windows logo in the taskbar to bring up the Start Menu.
  2. In the search box, type firefox.exe - safe-mode and press ENTER.
  3. If small Firefox Safe Mode window opens, click the start Safe Mode button.
  4. For more details, see the problems to troubleshoot Firefox in Safe Mode

  If Firefox does not start safe mode, start the Profile Manager? If so, create a new profile and try to start Firefox in this profile.

  • Use the Profile Manager to create and delete profiles Firefox

• Screen is not updated running Webex

  I use firefox 22 and using Webex One-Click on the desktop

  Everything works fine and I am able to view sharing very well, but when I share my screen that I will meet a number of problems of editing screen.

  Drop-down menus on any website will not work.

       When clicking on a drop down menu, often you will see a border or outline of where box would be but no selections are available.  After waiting for ~10 seconds the selections become visible.
  

  When I stop screen sharing is frozen white and I need to put an end to firefox and restart.

  I'm not using the webex for firefox plugin, and firefox is the only browser in this case. IE, Chrome, both work fine. This happens on
  2 personal laptops both running windows 7 64
  1 laptop running Windows 7 32

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Portege M200 BIOS update running Windows 7?

  Hello

  I recently took a Portege M200 and installed (via PXE - network installation) Windows 7 above. I want to upgrade the BIOS as is always in the original BIOS (1.1). I downloaded and extracted the pkg and tried to install through Windows but it says that my OS is not supported. I don't have an external CD drive or floppy drive - how do I update the BIOS? I tried to put it on a USB key, but it doesn't seem to be an option to boot from USB.

  Thank you!
  Jerry

  > I downloaded and extracted the pkg and tried to install through Windows but it says that my OS is not supported. I don't have an external CD drive or floppy drive - how do I update the BIOS?

  Seems that BIOS cannot be updated because Win 7 is not officially supported on this good old classic.
  However, AFAIK the VAP (value added package) is required to run an update of the BIOS. So, try to install the VAP. Choose this tool which is available for other models of laptops.

  > Anyone know where I can find a driver for it? I do not see there are 2 devices not recognized - a 'Base system device' and an 'unknown device '...

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=78
  This article describes how to find drivers for unknown devices.

• HP update: Intel Matrix Storage Manager Driver Update runs continuously

  I have an elite m9340F.

  Has started to run the HP update today. He said she intends to eight 8 updates to apply.

  The first two seemed to go OK (HP Update - update of safety and RealTek HD Audio Driver.

  Problem: The update of the Intel Matrix Storage Manager driver worked for more than an hour. It is running and CPU utilization... the HP Update UI is unresponsive and does not have a Cancel option.

  I'd normally kill the process using Task Manager - but I'm worried because it's my hard drives.

  Any advice?

  Thank you, Mister-Do...

  I was worried for the update that was going to kill (I killed him after two hours) because I could see that the update of the Storage Manager was still running.

  Finally, I killed the HP update process using the Task Manager.

  I think that the problem was related... permissions when I tried to install the update even initially your URL, it has not yet - but - when I recorded the same .exe on the desktop and then it ran using 'run as administrator' - it worked!

  So, thank you very much.

  I continue to run in troublesome behaviors with Vista UAC/permissions / file permissions that are NOT compatible.

• How to run terminal console of the CRIO output rtexe

  Hello

  I want to run the rtexe application in CRIO (9014) from the console output terminal. In my application the availabe lan port is connected to any other device using cross-over cable. That's why I want to change application console using the console terminal. I tried the taskspawn command but the crio restarts. Is there a command so that I can run the terminal console application.

  ... I don't know how to get any input from keyboard (the new path of application) of the console terminal...

  You can use the interface for RS232 communication standard series. If for example you send 1, 2 or 3 as a string to the cRIO and then you change by program the ni - rt.ini to change the path of access between a startup2.rtexe and startup1.rtexe, startup2.rtexe.

  Moreover, I have to restart the controller every time I change the path.

  When you use the method with the executable and then one more, then Yes.

  IAM cannot use the Subvi because I need to change code fpga also to different instances.

  I don't understand why using SubVIs on the RT does not give you the ability to change the fpga code.

  If the second method example would be Sub1.vi, Sub2.vi and Sub3.vi. When you get the 2 interface command series, you close the reference to the FPGA1.vi that is used in Sub1.vi and stop Sub1.vi. Then, you start by program Sub2.vi where you open and run the FPGA2.vi.

  Christian

• error code 80070005 Windows Update running

  Original title: error code 80070005.

  Last Friday, my laptop had a message saying Vista had stopped working properly and I had to install service pack 1 (even if this had been done just after buying 18 months ago), I did the install and now all THE updates have been removed from the computer and he said: he can't do windows updates the error code 80070005. can anyone help with this. Thank you

  Hey gordont,

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  This should be it.

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BSOD on all options after starting windows updates running.

  I ran the windows updates last night I shut down my computer.  I remember it being about 12 updates to run.

  Windows Vista, 32-bit

  This morning, I rebooted my computer and during the loading sequence, updates continue (the non-graphical part) and then I got a BSOD.  I tried to run all the security modes and got the same message.

  I ran repair my system disk and got the message that he could not repair the version of windows.  I tried a system restore, but it said I had no save points.

  Is there a way to manually tell it that updates have been an uninstall from the reapir vista disk command prompt?

  The specific the BSOD error code is
  0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)

  Any help which is not one of these answers canned that has a bunch of stuff I can't do since I can't on something else that the ERD would be useful.
  Thank you!

  In the end I solved it me - so if someone runs into similar codes - here is the summary:

  I ran Windows Update.
  On reboot the part of the update that runs in non-graphical mode full - then crashed by the computer.
  I got BSOD screens whenever I tried to boot in any mode.
  The specific error code is 0x0000007E (0xC0000005, 0x8264CB56, 0x803998CC, 0x803995C8)
  I tried the repair disk installation process - which could not find anything.
  I couldn't do a system restore point, because they were all gone.
  I called Microsoft - they were very nice, but their only solution was to re - install which was not possible for me.
  I downloaded and created a boot cd on another computer that could run antivirus software.
  The disc has been call BootCD Secured2k - there is a forum on the Mcafee site about this.
  I used it and found a Patched - atapi.sys trojan that he removed from the case.
  (Reading between the lines - this thing has been disrupted by the Microsoft Update that caused the mess)
  Then I got a new problem starting with the error code: 0x0000007b 0x80399bb0
  Same problem of being unable to boot in any mode.
  Same problem of being useless installation disc repair.
  After leaving it for a few hours, it occurred to me that perhaps when atapi.sys, that Trojan has been deleted the file was so.
  I connected the command line available from the installation disc advanced repair options.
  ATAPI.sys had indeed disappeared.
  I used the X:\windows\system32\drivers\atapi.sys and copied on my C:\Windows\system32\drivers.
  And presto! -my windows starts with happiness and everything seemed to work.
  (Why can't notice of repair of microsoft one missing disk or messed up file atapi.sys?)

  Unfortunately a few days later I noticed the Windows updates not working and I couldn't go even this part of the site.
  I tried everything I could think of and failed.
  So I called Mircorosoft again.
  We spent an hour on the phone and they found the problem this time!
  I used OpenDNS as my DNS provider for performance of problems caused by Time Warner.
  For some reason any OpenDNS blocking any attempt on my end to reach the Microsoft Update sites.
  I went from Microsoft recommended DNS and my computer was happy again.
  Everything has been happy since.

  And just to prove that I learned my lesson - I bought Norton Ghost and tries to configure full backups regular since the system restore point says that it don't work for me (I have a vista upgrade a XP Home machine on a FAT file system)

  So:
  Secured2K bootable anti-virus CD (and you can run other analyses of viruses such as PA recommended wear)
  If ATAPI. SYS is removed or bad - I copied it from the disc command prompt install.
  If you Microsoft updates stop working and you can't reach their windowsupdate.microsoft.com - check your DNS.