Satellite Pro 6100: keys Fn does not

Similar Questions

• A Satellite Pro 6100 graphics card does not work correctly

  Hello!

  I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
  I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.

  Now my questions:
  1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
  2. How can I do this, is there some tutorials, especially for my laptop?
  3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?

  I thank very you much in advance!
  Lukas

  Hi Lukas

  The led flashes as it provides a microcode error!
  This is especially if the malfunction of hardware has been detected.
  I presume that the replacement of the graphics card is the reason!

  As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
  Looks like that the BIOS cannot handle this new graphics chip.

• Satellite Pro 6100 video card does not work!

  I have a Satellite pro 6100, but the video card will not work!

  Toshiba sells parts of the satellite pro 6100?

  Greetz, jeroen

  Hello

  As far as I know that Toshiba doesn't sells the parts directly and you can order it by the service partner authorized in your country.

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Satellite Pro 6100: peripheral USB does not

  Can anyone help me please with the following problem.

  Satellite pro SP6100:
  After the computer starts, I get the error message USB device does not work correctly.
  I have nothing plugged into the USB port but I don't get the error message.

  Is there anyone with any problem and does anyone know a solution?

  Hello

  How rachelrising said it, it s a good idea to remove the device from Device Manager.
  After the reboot, the operating system should recognize the device again.

  Best regards

• Data satellite Pro 6100 wireless switch does not

  I just rebuilt my 6100 with xp professional, but now will not turn my switch wireless on! Which means that I can not get the Wi - Fi connection and I can't install the bluetooth drivers... anyone have any ideas?

  Hello

  What switch do you mean? Do you mean the switch on the side of the laptop or the FN F8 key combination?
  Usually after the operating system installation, you will need to install the WLan card driver and the FN keys to use the FN combination.
  Check Device Manager if the wireless network card is installed correctly.
  If you need drivers Toshiba then please visit the Toshiba driver page.

• Satellite Pro P300 key media does not

  Hello world.

  The media keys (play, pause, stop, etc) on my P300 have stopped working, I suppose, that a driver is down somewhere after a windows update or something?

  Nobody knows what the drivers are called for the multimedia keys in order to reinstall them and see if that solves my problem?

  Thank you.

  Hello

  I assume you mean on the Toshiba control buttons.
  These buttons are controlled by software Toshiba controls using Win XP or value-added Package using Vista.

  I put t know what OS you have, but according to the OS you use, you need to reinstall one of the applications mentioned.

  Good bye

• Re: Satellite Pro S500 - brightness adjustment does not work correctly

  On my Satellite Pro S500 (preinstalled Windows 7 64-bit) change the brightness by pressing FN - F6 or FN + F7 does not work. The other NF - f... combinations seem to work correctly.

  When I press FN - F6 (or F7) a control box to change the brightness to poster (as expected), but the level is still displayed as "1" independent of the current value (for example changed from Control Panel or with the eco utility) and it is not possible to change it with FN - F6 or F7. I just reinstalled vap and restarted the computer, but nothing has changed.

  Hi asdf.

  I put t know what s wrong exactly but normally the FN keys are associated with value added Package, but you wrote that you already reinstalled

  In my opinion, you should try a system restore to an earlier point. Maybe something messed up the registry, you can start System Restore in Windows Advanced Boot menu.

• Satellite Pro L850 - keyboard / touchpad does not work

  Hi all!
  I just bought new Satellite Pro L850 with windows 7 64 bit on a recovery partition.
  I have a big problem of internal cause keybord does not work under windows. In the bios, I can do anything I want. But the first configuration of windows (I can not deal with same user name and the name of the computer), keyboard does not work. I own windows version (with programs toschiba - recovery partition).

  It seems that this is not a cause of hardware under the work of bios keybord problem.

  Extra I have updated the bios last version 6.50, but not noticed any changes.

  Please help me with this question, cause I don't have any idea what to do now.

  Good day and w8 for answers

  PCZ

  PS. external keybord on usb work!

  Post edited by: pcz

  The whole story seems incredible. Keyboard and new laptop does not work?
  Install the check and image recovery again if the situation is the same. If the problem persists contact your local dealer, explain the situation and ask for Exchange.

• Satellite Pro L450D - web application does not yet

  Hello

  My toshiba Satellite L450D Pro does not work yet.
  Please I need a link to download a new one please.
  I have tried several sites but all proved abortive.

  Here you can download all drivers and software for your laptop model:
  http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

  You will also find the webcam software.

• Satellite Pro C650 - cooling fan does not work

  My Satellite Pro C650 overheats and stops automatically within 20 minutes of leaving upwards. I checked the CPU fan and noticed that it does not turn upward, even if the laptop would become very hot. I tested the fan with a 9 volt battery and it works perfectly.

  Can someone tell me exactly what the problem is? And how to solve it.

  Thank you.

  > Can someone tell me exactly what the problem is?
  On this virtual path, no one can say with certainty what the problem is. We can only speculate what may be the problem.
  Usually, cooling fan starts immediately after starting the laptop slows down and offers the optimum temperature of material. After reading your ad I didn t understand how it works. He turns and there is no sign of life?
  Problem can be power.
  Cooling fan will be controlled by sensors of temperature and activity depends on the temperature of the material but if your machine cooling fan does not work, I imagine that there is no electric power.

  What do you think?

• Satellite Pro C50-A-153 does not not turn on more - overheat?

  LS,
  A week ago I bought a new laptop, a Toshiba Satellite Pro C50-A-153.

  Last night I was watching some micro-credit (looking for a new holiday) and I noticed that the laptop was overheating.
  I hit the market / stop butten and it turned of... later.
  And now the computer lights no more.

  _Situation: _
  laptop was placed on my table, completely cleared of any blokades for air intake.
  The table was heated. Now after hours of reflection, the computer does not work.
  With or without power line in it.

  What should do?
  Erik

  Hello

  Let's hope that Timox tips might work for you.
  In case of workaround won't help you, I would say that some hardware is dead, and so the laptop does not power and more.

  What part of material likely to be affected? Hmm, in the worst case, your motherboard is faulty.
  But I think first of all that some less expensive parts need to be checked for example RAM modules.

  RAM failure would prevent the laptop to boot and so I would check the modules first.
  I don t think there is something wrong with HARD drive because even if the HARD disk is defective, the device turns on but could not start the system.

  But it's a new laptop... so don't replace anything. The guarantee is valid and in the event of hardware problems, the guarantee must cover the laptop repair.

• Satellite Pro M10 Fn + F5 does not not after login?

  Im hoping someone can help me. IM totally confused.
  Im a projector off a Satellite Pro M10 running. The Fn + F5 works perfectly all the way up to the CTRL - ALT - DELETE prompt. Even at this stage, I can still Fn - F5 and look through the settings. As soon as I connect the FN - F5 does nothing? I deleted all monitors, reinstalled the video card with the latest driver and installed the key utility function of the device from the website?
  I guess it must be something with the display settings once the user connects, but I can't get out? I tried to take the setting down to the basic 16-bit and 800 x 600, but it makes no difference?
  Any help or pointers would be helpful?
  Thank you
  Mark

  Hello

  Sorry, but tells you is a little confuse.
  The FN + F5 combination allows to switch between display devices. You can choose an external monitor, TV etc.
  If you want to use the FN keys, you need to install the driver Toshiba display Utility (change of display device) and change the Hotkey utilities for display devices.

  These two applications are responsible of the correctly using the FN + F5 option.
  The graphic display driver has nothing to do with the FN + F5 keys.

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• Satellite Pro 6000; sleep function does not work after upgrade W98 SE to XP

  I bought a windows XP cd and installed on W98 on my Satellite Pro 6000. The sleep function does not work now. I probably need a software of Toshiba. What do I need? Where can I find? What is the order of installation?

  Hello

  All drivers Windows XP Home edition, tools and utilities you can find on Toshiba support page under http://eu.computers.toshiba-europe.com > support & downloads. You have old laptop model and because of this type of product, you choose option ARCHIVE.

  Order of the facilities is as follows:
  -Windows XP
  -Display driver
  -Audio driver
  Toshiba - common modules
  -SD Card host driver
  -SD Card Driver
  -BlueTooth Stack
  BlueTooth - Easy Connect
  -Mouse driver
  -Modem driver
  -LAN driver included with Windows XP
  -Infrared driver
  -Toshiba Power Saver
  Utilities - Toshiba
  Toshiba - post Mobile
  -Toshiba Console worm.
  -Toshiba Hotkey for display devices

  I hope that you will be able to install Windows XP Home edition successfully.

  Good luck!