Satellite M100: BIOS time is incorrect

Similar Questions

• Lose Satellite M100 PSMA0A time but no date.

  Hello

  I have a portable Satellite M100 (PSMA0A-0J4002), who has problems with the hold time. He lost several hours in normal operation (mains or battery power or even with no battery and only AC). It stops when the computer goes into hibernation or is disabled.

  My Windows time zones are correct and I turned off automatic updates of internet time too.
  The strange thing is that the date never changes! It's not 1980 or similar when the battery is removed. That means it's not the CMOS battery?
  I disassembled the laptop looking for the CMOS battery, but it is soldered in. Is this correct?

  I don't know if it's relevant or related, but sometimes the screen turns black after emerging from hibernation and the laptop must be turned off and when he comes back he asked something like: clear memory and reboot or restart.
  I have to choose erase the memory and restart. Very rarely, I also have the blue screen of death with count upwards saying that memory dumping (I think).

  I deleted my firewall and AV programs but still lost time.

  Anyone is able to help please?
  Is it likely to be material, battery CMOS or software?

  Thanks in anticipation!
  Lewis

  > I disassembled the laptop looking for the CMOS battery, but it is soldered in. Is this correct?
  I m not very well how it s mounted on laptop M100, but in many cases the CMOS batteries are not easy to remove it s always a job for technicians of the ASP

  The issue of the date and time may be linked to the CMOS battery
  Usually, you can charge this battery easily.
  In order to load the CMOS battery, the laptop must be connected to the power adapter and the laptop must cover more than 20hours.
  After that the CMOS battery needs to be recharged.

  But if the question seems yet, then you should check if the update of the BIOS might help if not it s a motherboard problem that should be checked by a technician of laptop!

• Discussion of 'Windows 7' on Satellite M100-222 - complete

  Good day everyone! This post on 'Windows 7' on 'Toshiba' 'Satellite' M100-222.

  Perhaps, this method (and as some drivers & utilities) will be to apply successfully for other models M100 "Satellites". Because some very similar models on the technical level. For example, 'Satellite' M100-221 & ect. I want to share & discuss. Because reliable information and a practical guide on this subject on the Internet is virtually absent... or little information is not completely. I am having some problems. With these questions, I want to share. Perhaps, we will find a correct solution together. Please, join... Then...

  First of all, the BIOS update! This is necessary for 'Windows 7' If your BIOS version 3.00 update - Toshiba Satellite M100 BIOS update v5.60;

  Before install "Windows 7"... I updated my BIOS (v3.00) to v5.60 - Toshiba Satellite M100 BIOS update v5.60
  I did it by 'Windows' XP Pro x 32... Executable file simply run it and follow the steps.

  Note:
  There is two years that I posted the question in the present case (forums.computers.toshiba - Europe.com) on my CCF. Clock in the BIOS (I forgot the BIOS version. Original BIOS, I bought my laptop & no has not updated the BIOS then) was frozen. Sometimes the time indicators worked, sometimes not. Very little time. But indicators stood also hours. Time passing in the system. In the frozen BIOS - 13:13:13, for example. Can I update the BIOS - v3.00, I hope my CCF works again. Nothing... Two years, I worked with frozen CCF. Every day I corrected time in the BIOS manually. Seconds are frozen... Sometimes the time work... But really the time in the BIOS has been frozen. I know this isn't the RTC battery problem. Physycally battery is normal. I knew that it is a BIOS problem. Because tests revealed it - physycally battery is normal. BIOS no error message. As the problem of the RTC... Some gave advice on the forum, and I'm not a beginner... Nothing... The BIOS time is frozen...

  Thinking about upgrading the BIOS to... 'Toshiba' added value package v1.2.40 (Win7 x 32)... When installing I get the error message - 0x8146045B
  Tried to install different versions of "Toshiba" extra package. Same error... Guessed the BIOS update! Among the drivers & utilities in site 'Toshiba' BIOS for 'Windows 7 ' offer for Satellite M100 (PSMA1E) v3.00. But BIOS v5.60 shown for 'Windows' "Vista". Same platform, same core with 'Windows 7' (theoretically)... Basic logical approach! I downloaded & updated BIOS - v5.60! Great! BIOS has been updated... Perhaps, "Toshiba" value added package will install properly. I hope. I wait a few seconds after the system shuts down. I turn on my laptop & press F2 - looked at BIOS... Incredible... First of all, I've seen - seconds in my clock BIOS runs again! Each of us felt a sense of joy! But after two years... The BIOS time worked again! So, it's amazing! But don't be naïve. Certainly, there is a scientific explanation. I mean the BIOS update can help solve similar problems. But everything has to be studied in detail. After BIOS update, I installed "Toshiba" value package v1.2.40 (Win7 x 32)

  Then I found & download drivers & utilities. I checked with compatibility in "Windows 7". For two 'Windows 7' - x 32 & x 64 platforms... I'll find some utilities - Touch "Toshiba" & launch, its virtual, DVD - RAM software "Toshiba", silent acoustics, also central control Catalyst "ATI"... Here's a question open for me. But no problem, it's easy willingness...

  Then I install "Windows 7" x 64 ultimate (I managed to install "Windows 7" x 32 & drivers, before utilities).

  Always install the following drivers:

  Intel Chipset device software v9.2.0.1021 (Win7 x 32 & x64);)

  ATI Mobility Radeon X 1400 driver (Win7 x 32) or for (x 64 Win7) - requirement (download it on - http://catalog.update.microsoft.com/v7/site/Home.aspx & extract to the folder using any archivators.) Then update the VGA Standard of this folder drivers);

  Realtek High Definition Audio Codecs vR2.57 (Win7 x 32 & x64);)

  ALPS Electric pointing device driver v7.x5.303.117 (Win7 x 32 & x64);)

  Intel (r) PROSetWireless drivers v13.4.0.139 (Win7 x 32) or (x 64 Win7) - requirement;

  Texas Instruments integrated flash media controller driver v2.0.0.8 (Win7 x 32 & x64);)

  Toshiba Bluetooth stack v8.00.02 (Win7 x 32) or (x 64 Win7) - requirement;

  Toshiba registry patch for storage config v1.0 (Win7 x 32 & x64);)

  Toshiba registry patch for Win7 devices & Printers v1.2 (Win7 x 32 & x64);)

  Toshiba SD utilities v1.8.1.8 (Win7 x 32 & x64);)

  Toshiba Software modem v2.2.97 (SM2297ALD05) (Win7 x 32) or Toshiba Software modem v2.2.97 (SM2297ALS05) (Win7 x 64) - requirement;

  Toshiba v1.0.25.5C utility driver support (Win7 x 32 & x64);)

  Toshiba value added package v1.2.40 (Win7 x 32) or (x 64 Win7) - requirement;

  Of Toshiba Flash cards support utility v1.63.0.4C (Win7 x 32 & x64);)

  V4.01.00 Toshiba Assist (Win7 x 32 & x64);)

  Toshiba TEMPRO v3.3.4 (Win7 x 32 & x64);)

  V8.0.23 TOSHIBA ConfigFree (Win7 x 32 & x64);)

  Intel (r) PROSetWireless software (Win7 x 32) or (x 64 Win7) - requirement;

  Toshiba Software modem region Select utility v2.3.0.13 (Win 7 x 32 & x64);)

  Toshiba supervisor password utility v3.0.1.0 (Win7 x 32 & x64);)

  Toshiba Hardware setup utility v1.63.0.32C (Win7 x 32 & x 64).

  During system reboot do the install & updates!

  And please, I beg you, help for the next:

  Everything worked fine! But yesterday I had the installation of material of "Toshiba" and receive the runtime error message! I know that "Toshiba" HW should be compatibility with BIOS! Please tell, anyone know what version "Toshiba" HW compatibility with "Toshiba" 'Satellite' M100-222? Or 'Satellite' model M100?

  And... problems beetwen Toshiba value added utility support package & Toshiba Flash cards! Flash cards do not work... I uninstall both and reinstall again... Same situation... A few days ago worked well... But not now... I don't remember, maybe change the configurations in the settings of Flash cards... Do not remember... Help to solve these problems. It is very important!

  For example, I looked for laptop Satellite A500 - Toshiba value added package v1.2.26.64 (Win7 x 64) & complect Toshiba Flash cards support utility (Win x 64) v1.63.0.4C! Perhaps, Toshiba value added package v1.2.40 (Win7 x 64) incompatibility with Toshiba Flash cards support utility v1.63.0.4C (Win x 64)? Versions, I think that...

  Does anyone has any information about these utilities for platform "Windows 7":

  "Toshiba" Touch & launch;
  'Toshiba' virtual sound;
  DVD - RAM software;
  Acoustic silencer.

  and "ATI" Catalyst control center... For the full control "ATI" Mobility Radeon X 1400 graphics adapter "Windows 7". I can only update the graphics card drivers. But do not know which version is the compatibility with the graphics card "ATI" Mobility Radeon X 1400 "Windows 7".

  Thank you! I have very little time... Lots to do! I will try to fill the drivers on sharing files or torrent. But for this I need to collect all the drivers and utilities. I have to check. Week of rest, I set to work and share with you what I could.

  Thanks again!

  Hello Gabriel

  You wrote a very interesting announcement, but, as you can see, almost ten days later there is no one comment. From time to time I m here in this forum and I have noticed that people are not interested to read these stories.
  Problem is that you gave a lot of information and who should write the serious answer must create real concept how to proceed and has spent a lot of time for the full discussion.

  I put also t have time for an in-depth analysis, but what I can say is follow:
  If you want to install more recent OS on the old model of laptop as a first step, you should check if your model (your is PSMA1E) is supported for the operating system you want to install. I can see your model is not supported for 64-bit OS, just for 32 bit Win7.

  So what to do?
  You must have a list of all hardware components and try to install the drivers available for other models of laptops. Some 64 bit Vista drivers can be used on Win7. HwSetup designed for 64-bit Vista should work fine on your Win7 installation. I did several times in the past, and each time it worked fine.

  Toshiba touch & maybe I get m wrong but this old tools is known to me for WXP only. I've never seen in Vista or Win7.
  Virtual sound the same as for T & l. it was designed for Windows XP Home edition only.
  Two others can be also for WXP only.

  If you don t have such tools for Vista you'll them for Win7 too.

• Satellite M100-JG2 HotKey and date and time problem

  Hi all

  I'm not very good with computers, and I've had some problems for a while now. My laptop is almost three years, I don't know why I'm writing this after so long but anyway. I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I'm not very good at explaining, but I hope you guys can help! I appreciate it really :) Show!

  > I think they are called "keys" or "launchkeys", hopeyfully, you know what I mean, but anyway they do no more work. They worked for a while, but they do not work now. I went into the control panel and went into the 'Toshiba' orders and tried to change what does each control, but it still does not work. No one knows how to fix?

  The Toshiba Satellite M100. M100-JG2 seems to be a Canadian series laptop. I recommend you to visit the driver Toshiba Canada page and to download and reinstall the tool called controls, Toshiba HotKey Utility, touch and launch.

  http://support.Toshiba.ca/support/download/ln_byModel.asp

  > Also, another problem that I had since I first laptop is my date and time are screwed up. If I put my 15:30 time, it works perfectly, until around 16:15, that when he goes back to 15:30 and go all the way up to 16:15 and continues in this cycle until I manually change the time. I had a few friends (no professional) to look at, but can not understand. When I start my laptop I go to settings in the start screen, try to change it was from there, but it keeps going during the cycle. If I click on the time and click on the tab "internet time" and say "update now", it updates, and then only time will work normally, but only until I turn off my laptop. Once I turn it on then next turn, it passes through this new cycle of 45 minutes. If anyone has had this problem or knows how to fix?

  I think that you have changed the date and time in the BIOS. Is this good?
  If not, change it and don t forget to save the changes.

  In Control Panel--> Date and time--> time tab Internet, please uncheck the auto sync with the internet time server.
  In the other, called tab time zone please choose the right time zone and activate the tick to the option called automatically adjust the clock for an advance of changes

  See you soon

• Updating BIOS for Satellite M100-150

  May indicate the reference of BIOS for Satellite M100-150 for Windows XP download, on an official website, I can not download, the reference does not work.
  I use the translator so that for the quality of the translation, I don't answer. :)

  Hello

  Here, you need to check if the Bios update is available for your model, otherwise I think that there is not another source to download here.

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  ??????. ?????? ?? ??????, ?????? ???? ?????? ? ??????. ????, ?? ???????, ?????? ??? BIOS? ???? ???????????? ? ?????? ????? ???? ????????).

  Sorry, guys I have replied in Russian, just want to help him because of the bios

• BIOS recovery for Satellite M100 - 191 PSMA0E

  Hello.

  After asking for help in the forum to find the driver on my laptop Satellite M100 - 191 PSMA0E, I installed windows xp and the driver.

  What happens is that when you try to update the bios of windows, the computer asked me to save the old bios and before that I do something and it was thus blocked for almost an hour.

  I disconnected and then reconnected and now nothing appears.
  It turns on and I can see the dvd player to work, but nothing appears on the image of the laptop.,.

  Can anyone help to recover the BIOS, because I think I messed up here

  Thank you

  Hmm seems something went wrong during the update

  Damn that s really weird in the worst case you will have to send the laptop to a Toshiba ASP to get the module ROM flashed again

  But try the workaround in this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=54395

  the user ale210 has had similar problem and fortunately found a solution.

• Satellite M100-165: screen dithering also after BIOS update

  I bought a Satellite M100-165 PSMA1E-2 days ago and I have the same problem as toshiba it described here:
  http://support.toshiba-tro.de/KB0/TSB6901K20002R01.htm

  I updated the bios to version 2.10 and the latest ATI drivers, but the promblem is still there.
  Is there anything I can do to solve this problem, because the dithering promblem is really annoying!

  P.S. The LCD Panel seems to be a SEC5643

  Hi guys

  If you have read the topic about this issue with the Satellite A100, you will see that many user were frustrated but right at the last update of the available BIOS. It cannot happen overnight and in my opinion, you must be patient and hope that the good BIOS update will be available shortly.

• Updating BIOS for old Satellite M100

  Hey owners of toshiba,.

  I have the SATELLITE M100-178
  Toshiba offers me version BIOS 3.0 for WINDOWS 7 32 bit.
  where is the problem with DRIVERS, I can't install them, I get errors in the installation.

  Question:
  WINDOWS 7 need XP BIOS 3 version or it takes VISTA BIOS 5.6 version?

  Sincere friendships)

  Hello

  I n t have this model laptop but I installed Win7 on other older models without errors.
  Can you tell us what mistakes have you noticed, and what drivers are troublemakers?

• Satellite M100: Icon battery bar of tasks does not display time remaining

  Hello

  I have a Toshiba Satellite M100. It has windows XP Home, with no changes made (this is how it was preinstalled). I noticed that when I go over the battey icon only other percentages are displayed, not the rest of the time. I have a friend with a laptop L100 (which is quite similar to mine as material) which shows the remaining time in hours and minutes. You have any ideea, what should I do, I really want to know the time not a few percent.

  Thank you in advance.

  The same situation here! I noticed that the status of time does not appear on all models of laptops. I put t know why it is only a restriction of the power saver version.

  In my opinion, it is not so important, because I believe that the specified time is not realistic. This always depends on the use of the laptop.

  Good bye

• How to enable virtualization in the BIOS of the Satellite M100?

  In order to allow VMX for use by computer Xen does not only have a VMX capable chip, the computer must also have a BIOS that supports.

  When I am tempted to use virtualization on my Satellite M100, I get the message:
  (XEN) CPU0: VMX disabled by the BIOS.
  (XEN) VMX: failed to initialize.

  Can I use XEN virtualization on my computer?
  How to make it active in the BIOS?

  Thank you to.

  Hi mate,

  the next thing is a fact:

  even if the CPU and/or the chipset would support VT, it s absolutely impossible to operate if the BIOS does not have an option to enable/disable VT on your machine.
  Which means: no option in the BIOS - no VT

  Maybe you should check for a more recent BIOS, maybe it activates the option. Otherwise you will have no chance / no luck for this specific feature...

  Welcome them

• Satellite M100-233: stops right after the "XP" logo

  Hello
  I have a Satellite M100-233 with XP Home Edition SP3 (in Portuguese)
  When it is connected to the mains and the battery is not fully charged, sometimes the yellow light does not shine.
  Check the voltmeter application when this happens, tells me that the battery is on, the energy source is the sector, but the battery runs down.
  As I continue to use the laptop, the amount of the battery is reported as progressively less, until he tends to zero, then the laptop just turned off, as if she was not connected to the mains.
  Even if I start with the battery charged to 100%, after a couple of hours (sometimes more, sometimes less) the same thing happens.

  From an authorized dealer, they told me that it was probably a short battery shorted out.

  Get not that: * if she take the battery out of the laptop and turn it on:
  -Most of the time it turns off right after the "XP" logo.
  -It seems that this happens more often when the battery was fully charged the last time that I used it (strange! "I imagine this?)
  -Also sometimes happens after that I use the laptop for a while

  The only unusual bios message I get is "no TPM or TPM has a problem." I guess it has to do with the cryptographic protection, so I imagine that this has nothing to do with this issue.
  About two years ago, there was a problem with the battery (it ceased to be recognized as present by the laptop) which has been repaired under warranty: they told me that they had replaced the motherboard then. However, at this time there that I could continue to work normally without the battery, which is not the case now.

  I would be grateful for any advice. The most annoying is that this problem follows an irregular pattern, and the diagnosis, the dealer gave me seems hard to believe. As I use my laptop to collect data for research abroad, it is quite a risk for me to use it if I can't be sure when it will turn off on its own.

  Hello

  To be honest, I doubt that anyone here in the forum would be able to provide an exactly the answer to this question
  I think that it of almost impossible to say what's wrong without running any hardware checks.

  But to me it looks like a card mother number possibly it s power of electronic power supply which is part of the motherboard.

  What to say, maybe you need a new motherboard, but the new mobo is an expensive item, and in my opinion, you should first check if it is s to replace the motherboard or buy a laptop second hand for the same money.

• Satellite M100 - screen remains black after sleep/wake

  I just installed Windows Vista Ultimate on my Satellite M100 series.

  Everything works fine, but when the pc is forced into sleep/standby or it automatically goes into sleep/standby mode depending on the time of inactivity in the power settings could not be restored sleep/wake without turn off and restart.

  The blue button is orange and blinking indicating sleep/standby mode. When you press it again, it turns blue and the fan turns on. But there is no display and no response. The only option is to go to market.

  Help, please

  Hello

  What BIOS updated to the latest version?

• Satellite M100 - fans begin and are quite loud

  I just bought a new Satellite M100 14 "with Intel Centrino Duo. I thought that newcomers are not very strong, so I was very surprised that mine is very noisy. Even if no program is open and when I just started, the ventilation starts and is quite noisy. Is this normal?

  My computer laptop friends make no noise at all or simply if they have already been used for hours. Please could someone tell me if this is normal with this model or if I should change?
  I can't imagine that after five minutes the processor becomes so hot already.

  Thank you.

  I also read here in the forum that an update of the BIOS has helped to reduce the rotation of the fan. After an update, the fans runs constantly every time but with lower turnover and many quitter.

• Satellite M100-221 - PXE boot error message

  Hello

  I own a Toshiba Satellite M100 221 and when I turn it on it says

  PXE e61 media test failure
  Check cable pxe moF output
  Intel boot agent
  operating system not found

  I downloaded a program called Hiren Boot Cd and I he burned on a Cd and then I ran it if the 221 m100, then I loaded Windows XP Mini. I went into my computer and I don't because my partition B called drive Ram Toshiba himself. Where is my C partition? What happened to my PC? I think that the hard disk is dead. Is it?

  Hi lekhB,

  > I think the hard drive is dead. Is it?
  Is that the HARD drive is listed in the BIOS?

  If this isn't the case, it seems that the HARD drive is faulty, but in General, the PXE message means that an incorrect boot order is set.

• Satellite M100-180: installing drivers for Vista has no display

  Hello. I am from Russia and my English can be a problem. so excuse me.

  I have a Satellite M100-180.
  I installed vista on my computer and downloaded the drivers for vista for my laptop.
  But I have problems with display on the Ati Mobility Radeon X 1400 graphics card drivers.
  After installation the message that this driver installation. Please answer as possible))

  Hello

  Satellite M100-180 belongs to the series of PSMA1E. Please download the Vista GPU driver for the right series M100!

  Also on the Toshiba European page driver you will find BIOS especially designed for Vista.
  So if you want to use Vista on your laptop, you will need to update the BIOS.
  But be careful! Do not forget that you have chosen the good BIOS and the right update procedure because the incorrect BIOS may damage the motherboards ROM module!

  Secondly, the installation instruction txt file has been on the site driver of Toshiba. This txt file shows you the right direction how to install the drivers of Toshiba.
  The proper installation order is necessary and important. So please follow the guidelines mentioned in this document.

  Last but not least; the ATI drivers are also available for download on the * www.omegadrivers.net * site.
  The driver downloaded from this great short site on my laptop.

  Best regards