Satellite M100 - screen remains black after sleep/wake

Similar Questions

• Satellite L670 - screen remains black after sleep mode

  I recently bought a L670. When I close the laptop, it goes into sleep mode. No problem with that. But when I opened the laptop again the screen remains black.
  I see on the drive activity light that the laptop come out of sleep mode correctly, but the screen remains black.

  I don't have this problem when the sleep mode is only a few minutes. Then the screen comes up correctly.
  But for example after an hour of sleep mode... no screen.

  I'm doing something wrong?

  Thanks in advance for your feedback.

  Hello

  I recommend the update to the BIOS and the display driver.
  It helped to solve a similar problem on my old laptop.
  Maybe it helps in your case.

  Good luck

• My screen remains black after I wake my computer confirmation form.

  When I wake my computer, the status light on the power button stops flashing and lights up, indicating that my computer is no longer in standby mode. The screen remains dark, however, and I don't know if the sound works, but all I can do is do a hard restart. It is very annoying and I'm afraid it will damage my computer. Help, please.

  I read something on a fix for a similar problem on Microsoft Community, but I don't know if that is the solution (I remember that patches were potentially dangerous) and it is still a time to me. Another solution, I found was to update my driver, but depending on the devices I already have the latest version of the driver for my screen.
  If you could help me out or give me a link to the fix, I would appreciate it a lot.
  I have a G-62 HP laptop running Windows 7 64 bit, I installed on an ISO downloaded with a product key, I bought. My graphics card is AMD Radeon 4200.

  Video card problems are the most common cause of this problem.

  Try the following troubleshooting procedures in the order. If the steps described in the first procedure does not resolve the problem, continue to the next procedure.

  Reinstall your video driver

  1.
  Right-click the taskbar, and then click Start Task Manager.

  2.
  Click on the processes tab, click explorer.exe, and then click on end process.

  3.
  Click file and then click New task (run).

  4.
  In the text box open, type explorer.exe, and then click OK.

  5.
  Click the Start button, type in the box Device Manager search and then, in the search results, click on Device Manager.

  6.
  Double-click Display adapters, right click the display device, click Update driver software, and then follow the steps in the wizard that appears.

• Satellite P100: screen remains black after the awakening of the mode standby

  Hello!!
  Can someone help me with this problem?
  I update my bios [V3.30] 12.22.2006 and now I have a problem.

  When I put my laptop P100 in stand by and I return my screen no longer works! I push every button on my keyboard, I move my mouse but nothing.
  Only one solution to come back is to close my laptop and reopen after that.

  What to do? Please help me if you have any ideea!
  Best regards to all!

  Hello

  I hope that you used the good BIOS.

  Have you tried to update the graphics driver? Not? Then do it!

• Satellite A100-495 - screen remains black after switching to food

  After feeding, the screen remains black, the computer no longer works.

  What can I do, why?

  > After the transition to power, the screen remains black, the computer no longer works

  It works fine on battery?

• Satellite A200 screen remains black when you try to start

  Hi all

  My Toshiba Satellite A200 laptop computer no longer works, then everything started when I was playing a game, all of a sudden the screen turned blue with a tiny text written on it. I had to hold the power button for a few seconds to close, because nothing not happening on the computer. Then, I pressed the power button to open it. Everything was fine, until the Welcome screen. In this part, he wrote 'Welcome' but Vista left loading circle of it was not turning.

  After a few seconds, I decided to shut down the computer once again, so I hold the power button for the computer firm. Here's the problem: I tried to re-open it, but the screen remained black. Nothing was happening. The power light is blue, but not all computer activity. So I left it like that a few minutes then it closed and tried again, but it's the same thing. I tried to take it apart and noticed the card two memory was not entirely in its niche. I fixed it, but it does not solve the problem.

  I also tried to plug another screen on it, but this one was also black. So I handed the screen on his computer and tried to boot my laptop and it worked. He was the starter, but the first problem came, the Welcome screen was frooze it. So yes I close it up and then it's the same thing, the screen remained black.

  I don't think the problem is the screen, because as I said some time it goes to the Welcome screen. Also, I hear no welcome sound when the screen remains black as if the computer would simply not starts. And as I said earlier, I see no activity of the computer on the little light in front of the computer. And to the left of it, I see clearly that the computer is ON, because the power light is blue.

  That is my problem, the next time that the computer is able to start I'll try to boot mode SAFE, but until then, I don't know what to do. Please, help me.

  Thanks in advance,
  MrRoy

  EDIT:
  After the computer is turned off for about 30 minutes, I started and booted in safe mode. At this stage, I have locked my computer with the close button instead on the power button. Then I opened my computer and he started and the problem was solved. Now my laptop is open and working.

  So, if this happens to you:
  1. turn off your computer.
  2. wait about 30 minutes.
  3. start in safe mode
  4. close using istead of now off button power button closure.

  It should work.

  Finally, it does not work. I don't know why, but my computer did start after 30 minutes, but now it no longer works. Only, it will not start as I said later, with a black screen.

  The computer worked for about half an hour. I mean, I managed to start but after running a program, it just froze and I had to hold the power button to restart. I made about 3 or 4 times, and then he was simply the black screen again. I think the problem is my processor, maybe that it is damaged or something, would it possible?

  Because I see that the processor does not work when I try start it.

  So let's say that this is the case, would it be the symptoms of my computer?
  And if it's the processor, the only way to resolve this is to send it to a repairman or something, because I don't feel like it, I'd rather do it myself.

  But now, my computer is simply not starting, as I said in my previous post.

  Thanks in advance,
  MrRoy

  -----

  Note: The Edit button was not there so I had to double post :/

• G62 screen remains black after the windows logo

  Hello

  I have a HP G62-b05SD. I noticed that many people have the problem of simmular.

  I know what makes, but don't know how to fix it.

  So here it is.

  Sometimes when I boot / reboot system screen turns black after the windows logo, but if I wait a while, I do not hear the star tune up windows, but the screen remains black.

  I noticed that this happens when I shut down or restart the system with a usb port (be it a mouse or a stick is not serious)

  If I all out en usb port restart or turn on the machine for the first time this day here, everything starts well.

  So there must be some driver problems I think with usb ports and the screen or something.

  Help, please!

  HP G62-b05SD

  Windows 7 64-bit

  Intel i3

  ATI mobility radeon graphics card

  Ow and when I get the black screen, the hard reset does not always work.

  I also did a startup repair and it showed:

  "If you have recently attached a device to this computer as a camera or portable music player, remove it and restart your computer. If you continue to see this message bla... bla... bla... "

  I hope you can help.

  Hi Frosty1984,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP G62 - b05SD Notebook and having problems with the starter. Here is a link to BIOS update.

  What is the USB device that is at the origin of the questions?

  Thank you.

• Satellite L750D: Backlight remains off after sleep - how to turn on?

  On my Satellite L750D that keeps the backlight off after sleep. After the reboot it lights up as usual. How this effect can be avoided or how can I turn it on?
  (I can see everything on screen, but very dark).

  Post edited by: Gregor Toshiba

  Cool. Thanks for the comments.

• Satellite P500 - screen remains blank after updating BIOS 2.90

  I installed the new WOOD update through the station of service and after restart, the screen remains blank (out of service)?

  Any suggestions?

  Hello

  And on the external monitor you see a photo or not?

  In my opinion, something goes wrong during the update of the BIOS, and so the entire computer doesn t start anymore. All updates are pre-tested by Toshiba, so I doubt that only the screen isn't working anymore.

  You should try to remove the battery and unplug the AC adapter for an hour. Then install the battery and plug in the AC adapter. Make sure the battery is fully charged and then try to start your laptop.

  It's working now?

• Re: Satellite M - screen remains black

  Hello

  I'm not the most computer savy person, but I know that when I open the lid on my laptop, the screen is supposed to come. Sometimes the screen remains white, but I may here make the sign in his and if I plug it into the TV via the HDMI port it shows the screen works fine.

  That doing so is close, open and close the top several times and hope it works again. This can happen even if it is open and working and I restart the computer.

  Any ideas?

  Hello

  It would be very interesting to know which laptop Satellite M you exactly. Maybe you can add this information. ;)

  In addition you have connected any external devices waiting monitor via HDMI?
  If you have the SD card inserted, remove it.

  You use the latest version of the BIOS?

• Screen remains black after start-up M30X 124

  Hey there...

  I hope someone can help, or at least has the same problem. I read trough this forum but can't find anything similar. Description of the problem:
  After pressing the button 'Start', the laptop is a short sound (HDD - load I guess), and then nothing happens. The screen stays black, no sound at startup, loading, fan, hard drive. The only solution that I have because it is to stop the computer again (by pushing the Start button... 7 seconds), rechargable battery, put it in place and try again. I had this problem for 4 or 5 times now, for two weeks. This issue scares me. This may indicate that something in my laptop will soon die...? !

  Thanks in advance... Welcome, Dero!

  Hello

  This problem occurs with use of the battery or if the device is connected to the power adapter?
  Have you had problems with the battery charging procedure?
  I'm not sure, but I guess there is something wrong with the battery or the electronics of power supply. I recommended to remove the battery for the work with the AC adapter. Try to discharge the battery completely several times.

• I have an old iMac (about 10 years) and after a power cut the screen remains black after start-up

  IMac was on but in the sleep when had power cut. After feeding back immediately tried to start over, but I just black screen that could hear the startup chime, and hear the work of the machine. In collaboration with el captain. I have mouse and wireless keyboard. Any ideas?

  Reset the management system (SCM) controller on your Mac - Apple Support

• Portege Z830 - backlight of the screen remains off after sleep

  Hello guys!

  As described in the topic, the display backlight remains always off when my PT225E z830 returns from sleep mode. It's the only backlight, because I can see the image weakly if I have the screen against a light. Also using FN + F7 does not alter this State. The only thing that works is to restart.

  Y at - it an update of the display driver? Or is there any workaround to get back the backlight of the screen?
  Moreover, the bios is up-to-date with the version v1.60.

  Thanks for the reply!

  Hello

  Have you noticed this problem on the first day of use, or later?
  Have you changed anything, installed additional software or maybe your own version of the OS?

• Satellite C660D - screen is black after BIOS update

  Hello!

  I need your help to solve the problem that I have...

  I have Satellite C660D - 1 3, I was upgrading bios up-to-date and poster ON but black screen, ventolidor work and open and close leitor dvd...

  no idea what problem? And how to solve?

  I'm waiting for.

  Thank you.

  André Pedro.

  I'm afraid that the BIOS is doomed and the BIOS update was not successfully. It is not easy to fix.
  On this forum I found similar thread, then you can read and perhaps solve the problem.
  Check it out.

  https://Forum.Toshiba.EU/showthread.php?54395&TSTART=0

• screen brightness blocked after sleep/wake extended in windows vista with HP Pavilion dv6000

  Sometimes after recovery mode PC standby or Hibernate, the brightness of the screen is locked up and I can't change it.

  Nothing happens when I adjust the brightness setting in power or with FN + f7/f8 options.

  Even when I remove the power cable and operate on battery rest brightness up

  The only way to fix this is to completely restart windows vista.

  This happens not all the computer returns from sleep/hibernate, but it happens frequently.

  I have all the latest drivers for:

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093&LC=en&cc=us&DLC=en&product=3466864&lang=en

  using

  NVIDIA GeForce series video driver 7.15.11.5665 has,
  BIOS F.31

  I have all the latest important updates from windows update.

  Anyone know a fix for this?

  For example, is there a way to 'reset' of the screen without having to reboot vista?  Once the brightness has been blocked, and I tried to reinstall the driver for the graphics card. The screen resets during the installation process without getting out of vista, and brightness worked normally.

  Someone knows a way to reset the screen without having to restart or reinstall the graphics driver?

  HP Pavilion 6563, home premium Windows Vista 32.

  In fact, I found an easy way to solve the problem without having to restart vista...

  I just close the LID and open it back, now I can control the brightness again.

  I put the "close cover" - function of "doing nothing" in the powersettings...