Satellite M115 speaker problems

I wanted to know why my Toshiba speakers cause a sound dry?
And sometimes that of the speaker stop working!

Post edited by: haris78677

In this virtual world, it is not possible to give a precise answer to your questions.
Therefore, in my opinion that you should visit the nearest Toshiba service, put your laptop on the desk, show exactly what happens and ask the same questions again.

For now I can just say that there may be a cable problem, and it can happen that SOMETIMES this connection loose a speaker.

Tags: Toshiba

Similar Questions

  • Satellite 4090cds: speaker problem - no sound just a gurgling noise

    Hello
    I recently mounted a new tp of jack power my 4090cds satellite and now I have no its just a buzz annoying that passes through my speakers, it is the only noise I despite everything I do.
    For the moment, I unplugged my speakers to the motherboard, I checked all my drivers and other settings, even if it is an old laptop that is improved and is Windows xp pro.

    Thank you tony

    Hello

    You suggested that a new power supply were mounted on you laptop.
    Eventually, you did something wrong. Maybe it's something wrong with the sound card or only the s speakers are dead.

  • Strange problem with Toshiba Express Media Player on Satellite M115-S3094

    I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

    I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

    The steps included:
    1 deleted recovery Express media player disk partitions
    2. installed express media player
    3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

    Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

    I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

    Laptop works fine when I connect to windows by pressing the power button / stop.

    Can someone help me on this strange question... ?

    Hello

    The whole story is a bit confusing
    First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

    Now something about the Express Media Player installation;
    In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

    In addition, on the HARD drive should at least 150-200 MB of free space available.
    This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

    I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
    In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

    Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

    Could be useful for you!

  • Fatal error of TOSHIBA Power Saver 0x51A on Satellite M115-S3094

    Hello

    By the subject, that's the problem. Unfortunately, my computer which is Toshiba M115-S3094 has just recently a fatal error with the Toshiba Power Saver program like 3 days ago. The Toshiba Power Saver not only does not want to work, but it is even more present in the taskbar. First, I went to the properties to be able to restore the program, but nothing helped.

    Then I tried to uninstall and then reinstall the program, and he always gave me the same problem with the error: the program ends. Error fatal 0x51A. Right now, my laptop does not on the mode of power supply Toshiba but on common Windows system, such as the presentation or the laptop.

    So I need help to restore the Toshiba Power Saver. I run Toshiba M115-S3094 with Windows Media Center Edition.

    Hello

    Satellite M115 seems to be a Toshiba laptop because of the 5 at the end of the number.
    In this case, you must use the Toshiba on the Toshiba site energy saving us. Did you?

    Maybe you used the right utility electricity saver, so possibly that some registry or system files keys are damage in this case install the new OS for the Toshiba Recovery CD would be desirable.

  • Satellite M115-S3094 freezes after RAM upgrade

    Hello

    I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

    Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

    If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
    This all started when I upgrded memory. I tried to re install and it did not help.

    I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

    On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

    Hello

    I think that the problem is without a doubt for new modules of memory installed
    Maybe the modules aren't 100% compatible or failed modules

    I guess the laptop ran correctly with the old module of RAM.
    This would confirm my hypothesis and I think you should test the specifications with the other s RAM

    Good bye

  • Satellite M115-s3094 - can't burn anything on disks

    Hello

    Can someone please help?

    I have a toshiba Satellite M115-s3094.
    The problem I have is that it does not burn anything.

    I put a white inside and then it starts to burn and it fails, other times it says full.
    When I take the cd it looks like its been burned on the disc, but when I put it in the laptop, it appears as a white, and there is nothing on it, but see you that looks like it was burned...

    Please help its been like that for weeks... I use Nero 7...

    Thanks in advance...

    Hello

    What kind of discs that you use to burn and that is happens with CDs or DVDs?
    I have good experience with Verbatim CD and DVD-R as well as TDK discs.
    Then maybe you should check it with a high quality disc.

    In addition, you should look for an update of Nero. You can find it on the site of the factory.

    Last but not least I would like to delete upper and lower filters in the registry. That's why check of workaround from Microsoft:
    http://support.Microsoft.com/kb/314060

    Good bye

  • White screen on Satellite M115

    I have a laptop Satellite M115 with 5122 Mb of RAM and 80 GB of HD. I bought it in October 2006.
    The screen started to go white with white horizontal lines at the start.

    I turned off and swithced on and it was working fine. It was in November 2006.
    It happened 6 - 7 times in a period of 4 months, I thought it was a software problem.

    So I formatted the system and the problem did not repeat itself.
    But in August 2007, the problem started again.
    I reported it to TOshiba and was then out of country.

    I came back in November 2007 and was again out of country.
    The display is now completely empty with a separator.

    It works very well with an external monitor.
    Help, please.

    > But this problem has been with all Toshiba Satellite M115 series?
    I really don't understand how you came to it. Is that a question or maybe you have some info on a similar question on other Satellite M115 models?

  • Need drivers for Satellite M115-s3094

    Hello

    I have a Satellite M115-s3094, I had problems with my OS which was Windows XP MCE, but I couldn't fix it. So I got fed up and loaded in windows XP Professional, but a lot of my drivers are gone.

    I need drivers for Ethernet controller network controller, PCI device, flash memory, USB controller, SM bus controller, video controller... plus I have no sound. It is an Intel centrino duo... as you can see miss me a lot of pilots.

    Could someone tell me how can I find out what kind of driver I need and where do you get them from? Win XP SP2 installation would install one of these drivers?

    Any help at all would be much appreciated...

    Thank you all...

    I have the same problem. I just need the drivers for the Ethernet controller and a PCI device. I guess that the PCI device is the wireless card.
    I tried all the drivers on the Toshiba site, but none seems not to work.

    Please help us.

  • Satellite M115-S3094: error - cannot create a D3D Device

    Hello

    I accidentally deleted a graphics card driver, but managed to get it back, but before I deleted it I used to play the game (poker 3d) pkr but now when I load it, it comes up with an error message saying ' has not been initialized client - unable to create a--2005530516 D3D Device,--

    Do not appear as all my folders on my desktop. The only way I can get this on the screen is by pressing the keys ctrl + alt and delete and then type in the office.

    All this started to happen when I tried to connect my laptop to the TV.
    I'm on Windows XP media center. It's an a Toshiba Satellite M115-s3094.

    Can anyone help please because it drives me crazy that I'm very close to break the laptop computer in frustration.

    I don't know the driver of its use as all it says is unknown. If anyone can help or give me an idea on how to solve this problem, I would be very grateful.

    Bravo for your time.

    Hello

    Sounds a little like the Direct3D are not enabled in you the graphics settings.

    Please, start the DirectX using the dxdiag command and turn on all the 3D settings.

    In addition, it would be advisable to delete the installed 3D poker game and then reinstall it again. This should contribute to reconfigure the game graphics settings that are needed to run the game properly.

    Good luck

  • Express on a Satellite M115-S3094 media player controls

    I have a Toshiba Satellite m115-s3094 notebook. It came with the express media player feature. It worked when I ordered my playlist in windows media player 11.

    Today, the controls do not work at all.
    The two buttons above the controls (Internet and Media player) are fine, but I can't control the media player with the express media player controls.

    I've switched back to wmp 10, but I can't control it yet. I don't know if the express media player controls can control Media Center or not because I never tried to use it in media center, but the controls don't work not in media center either.

    I use a lot of these controls, if anyone can tell me how I can solve this problem.

    @ Gethsemane
    Yes, you must use the drivers and the CD of tools & utilities applications delivered. You need all if you want to use all the features of Toshiba laptop.

    Have you received a recovery CD? This CD contains the operating system image that contains all the drivers, tools and additional software. Just starting this announcement from CD, you will get full functional OS.

  • Satellite M115: Limited connectivity WLan

    I have a Toshiba Satellite M115 for the school and for the last two weeks, it works wonderfully, but earlier this week all of a sudden it connects not to the network wireless of the school (which is free).

    All that he was to tell me who can sense the network but cannot connect solid, limited or no connectivity is the message I get.

    When I go in to repair the network connection, that he could not because it could not connect to the network.

    Is there something that I am missing?
    Or a step I have to take in order to solve this problem, please help if you can

    Hello

    The WiFi network is secure?
    The limited WLan connectivity can occurs generally if the WiFi network is secure and incorrect encryption or key has been used.

    Sometimes it can happen that the WLan signal is not strong enough and therefore you can not connect properly.
    If you use the battery and then access the properties of card WLan (Device Manager) and disable the saving of the wireless network card!

  • Satellite M115-S30394 - config.sys file is corrupt

    I bought a Satellite M115 S 30394 is about 2 years.
    The first year he had 9 hard drives and Toshiba said they replaced the motherboard 2 times.

    It still does not work and the senario is first a message that the config.sys file is corrupt and after correcting it will work for a few days, then a message appears that the hard drive is about to fail and he does it in 2 days.

    I replaced because he couldn't be trusted in my company but I was wondering if someone has any ideas so that I can have as a spare.

    Thank you

    Hello

    If you get the message that the HARD disk fails, then it s advisable to replace it.
    But it s really strange question

    In any case, I never had this problem on one of my notebooks, but I think you should test the notebook with a new HARD drive.

    Good luck

  • Missing drivers for standby/hibernation on Satellite M115

    Hello

    I tried to re - install my Satellite M115-S3094, but I met some difficulties in the car. It was really hard to get all the drivers, but I think I got everything. that miss me is standby/sleep extended, I tried everything I could, but I don't know what is missing. Could someone give me a resource for pilots?

    It would be great if there was somewhere with all the drivers in one place, but just something to sleep/hibernate and perhaps the keys would be great.

    Thank you

    Can you please tell us what OS you are using?
    In any case, I assume you have an American model in order to check for drivers on http://support.toshiba.com/drivers
    Your Satellite must be registered.

  • Satellite M115-S3094: no sound on internet

    I've disabled the sound driver on my laptop, then allowed him. I have sound if I play a CD or computer laptop itself but not of her on the internet.
    It's a Satellite M115-S3094 running Win 7. Any suggestions?

    Thank you

    > I don't have sound if I play a CD or computer laptop itself but not of her on the internet.
    This means that its driver is OK and it s installed.
    I think that the wave volume control has been disabled or set to the lowest level

    Go to control panel-> sound-> playback control and check the volume level for all devices placed in the reading tab

    PS: the Read tab you must enable "hidden devices" and "disabled devices" by right-clicking and by checking options...

  • Satellite M115-S3094: which modem module should I use?

    Hello

    Please can someone help me solve what modem card is possible to build in this model?
    Laptop has no modem next card so I need to model or P/N to know what to buy.

    Thanks in advance

    Darko

    Hello

    I'm not quite sure what the card modem do you mean exactly, but I found the specifications laptop from Toshiba Web site us. Yes, it is a Toshiba set and all the details can be found on the Toshiba page we

    The detailed specification of the Satellite M115 series product page said that this laptop was equipped with the Toshiba Software v.92.
    So I really don t know why you need a modem card or a module additional modem

    Anyway, the laptop was already equipped with a modem and I doubt that you could install an extra.

    Good bye

Maybe you are looking for