Satellite M115-S3094 freezes after RAM upgrade

Hello

I just added Corsair - 2 x 2 GB 200 PIN SODIMM DDR2 667 mhz memory to my laptop Satellite M115-S3094.

Earlier I had 512 MB included with the laptop. The problem is that sometimes the computer starts and freeezes, none of the buttons work and I have to hold the button for 10 seconds to turn off and restart the computer. Sometimes I restart 2-3 times until it works.

If there is any problem after commissioning, then I find myself using the laptop for hours like now and I won't have any problem until I restart.
This all started when I upgrded memory. I tried to re install and it did not help.

I would appreciate any help from anyone who has faced such a problem. I also have windows xp home edition.

On the casablenca system, it shows 4 GB but used is only 2 GB. I even deleted one of the sticks, but I still have the same problem.

Hello

I think that the problem is without a doubt for new modules of memory installed
Maybe the modules aren't 100% compatible or failed modules

I guess the laptop ran correctly with the old module of RAM.
This would confirm my hypothesis and I think you should test the specifications with the other s RAM

Good bye

Tags: Toshiba

Similar Questions

  • Satellite L10-119 freezes after RAM upgrade

    My Satellite L10 is 4 years old. I wanted to update this change of RAM and HARD disk.
    I installed in RAM DDR1 SoDimm 1 GB PC-3200 (a unit) and used my computer for a few hours.

    But next time, he started to make mistakes and freeze or stop going to the blue screen.
    When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK.

    Will not track with * 1 Gb PC - 3200 * to use?

    Hello

    Case is clear!
    > When I use DDR1 SoDimm 512 MB PC-2700 as a single unit, everything is OK
    You used the not entirely compatible RAM modules!
    This is the reason why your laptop freezes!

    The fact is that your L10 can be upgraded to 1 GB RAM max, this means you need to use max 512 MB RAM module in a slot

    In addition, you can use the PC2700 200 pins (333 Mhz) DDR SODIMM modules and not of PC3200

  • Satellite M115-S3094: no sound on internet

    I've disabled the sound driver on my laptop, then allowed him. I have sound if I play a CD or computer laptop itself but not of her on the internet.
    It's a Satellite M115-S3094 running Win 7. Any suggestions?

    Thank you

    > I don't have sound if I play a CD or computer laptop itself but not of her on the internet.
    This means that its driver is OK and it s installed.
    I think that the wave volume control has been disabled or set to the lowest level

    Go to control panel-> sound-> playback control and check the volume level for all devices placed in the reading tab

    PS: the Read tab you must enable "hidden devices" and "disabled devices" by right-clicking and by checking options...

  • Satellite M115-s3094 - can't burn anything on disks

    Hello

    Can someone please help?

    I have a toshiba Satellite M115-s3094.
    The problem I have is that it does not burn anything.

    I put a white inside and then it starts to burn and it fails, other times it says full.
    When I take the cd it looks like its been burned on the disc, but when I put it in the laptop, it appears as a white, and there is nothing on it, but see you that looks like it was burned...

    Please help its been like that for weeks... I use Nero 7...

    Thanks in advance...

    Hello

    What kind of discs that you use to burn and that is happens with CDs or DVDs?
    I have good experience with Verbatim CD and DVD-R as well as TDK discs.
    Then maybe you should check it with a high quality disc.

    In addition, you should look for an update of Nero. You can find it on the site of the factory.

    Last but not least I would like to delete upper and lower filters in the registry. That's why check of workaround from Microsoft:
    http://support.Microsoft.com/kb/314060

    Good bye

  • Where to find the driver Hotkey Utility for Satellite M115-S3094

    Hello

    recently bought a Toshiba Satellite M115-s3094 laptop and you want to install the utility driver hotkey.
    Can't find it in the download from toshibas support website.

    Thank you

    Satellite M115-S3094 was designed for the American market.
    Each Toshiba laptop with the 5 at the end of the model number is a laptop Toshiba us and is why we search the Toshiba site we needed software.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

    Good luck

  • Need drivers for Satellite M115-s3094

    Hello

    I have a Satellite M115-s3094, I had problems with my OS which was Windows XP MCE, but I couldn't fix it. So I got fed up and loaded in windows XP Professional, but a lot of my drivers are gone.

    I need drivers for Ethernet controller network controller, PCI device, flash memory, USB controller, SM bus controller, video controller... plus I have no sound. It is an Intel centrino duo... as you can see miss me a lot of pilots.

    Could someone tell me how can I find out what kind of driver I need and where do you get them from? Win XP SP2 installation would install one of these drivers?

    Any help at all would be much appreciated...

    Thank you all...

    I have the same problem. I just need the drivers for the Ethernet controller and a PCI device. I guess that the PCI device is the wireless card.
    I tried all the drivers on the Toshiba site, but none seems not to work.

    Please help us.

  • Satellite M115-S3094: error - cannot create a D3D Device

    Hello

    I accidentally deleted a graphics card driver, but managed to get it back, but before I deleted it I used to play the game (poker 3d) pkr but now when I load it, it comes up with an error message saying ' has not been initialized client - unable to create a--2005530516 D3D Device,--

    Do not appear as all my folders on my desktop. The only way I can get this on the screen is by pressing the keys ctrl + alt and delete and then type in the office.

    All this started to happen when I tried to connect my laptop to the TV.
    I'm on Windows XP media center. It's an a Toshiba Satellite M115-s3094.

    Can anyone help please because it drives me crazy that I'm very close to break the laptop computer in frustration.

    I don't know the driver of its use as all it says is unknown. If anyone can help or give me an idea on how to solve this problem, I would be very grateful.

    Bravo for your time.

    Hello

    Sounds a little like the Direct3D are not enabled in you the graphics settings.

    Please, start the DirectX using the dxdiag command and turn on all the 3D settings.

    In addition, it would be advisable to delete the installed 3D poker game and then reinstall it again. This should contribute to reconfigure the game graphics settings that are needed to run the game properly.

    Good luck

  • Express on a Satellite M115-S3094 media player controls

    I have a Toshiba Satellite m115-s3094 notebook. It came with the express media player feature. It worked when I ordered my playlist in windows media player 11.

    Today, the controls do not work at all.
    The two buttons above the controls (Internet and Media player) are fine, but I can't control the media player with the express media player controls.

    I've switched back to wmp 10, but I can't control it yet. I don't know if the express media player controls can control Media Center or not because I never tried to use it in media center, but the controls don't work not in media center either.

    I use a lot of these controls, if anyone can tell me how I can solve this problem.

    @ Gethsemane
    Yes, you must use the drivers and the CD of tools & utilities applications delivered. You need all if you want to use all the features of Toshiba laptop.

    Have you received a recovery CD? This CD contains the operating system image that contains all the drivers, tools and additional software. Just starting this announcement from CD, you will get full functional OS.

  • How to clean my keyboard Satellite M115-S3094

    I already posted this time. How to clean UNDER my keyboard on my Satellite M115-S3094?

    I really need to know how to get the keyboard up, or do I have to remove each key for this? Someone please help.

    Thank you...

    Do you mean this thread?
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=113741#113741

    It of possible to remove only the plastic of the keyboard keys.

    Then you can try using a vacuum cleaner and could thoroughly clean dust and debris from the keyboard.

    Best regards

  • Satellite A50-109: after RAM upgrade-> blue screen

    Hi all

    I bought a new patriot 1 GB ram sodimm pc 2700 as an upgrade to my satellite a50-109. After installation of the equipment on the back of the laptop, I had some problems with windows xp bsod (blue screen of death). Errors 0x000000e8. After recording with microsoft, I had to reinstall the drivers... Can someone help me please!

    Thank you
    Alex

    It seems that you are using a module of memory without a name. These modules can malfunction. It s nothing unusual.
    So I use and always buy modules memory Kingston or Infineon brand, for example.
    I have goggled autour and actually ntfs.sys error might have something to do with the fault memory.
    It s whatever the module has been properly recognized in the BIOS. Certain areas of memory may malfunction

    In my opinion, you should check if the laptop will be functions correctly with the modules of memory recommended by Toshiba

  • No satellite M115-S3094 no video or post after Bios Update

    I have a Toshiba M115-S3094 with v1.20 bios and Windows XP. I read this on the Toshiba web site:

    Support news
    Updating BIOS for Satellite A100/A105, Satellite M110/M115 and Tecra A7
    Posted the: 10/04/2007
    Updated the: 10/04/2007 15:51:53

    In very rare cases, the battery of your PC may stop to accept a charge, i.e., the battery no longer works and is no longer supplying power to the computer. To minimize the risk of ever face this problem, we strongly recommend that you download and install the latest version of the BIOS by clicking on the "Downloads" link that will appear when you have finished reading the news of support.

    Given that I had intermittent battery problems, I thought I would update the bios to version 1.80.
    After the flash system says that it needs to restart. When it restarts the power light is on, but there is no video or post.

    I could do to fix this?

    Any help with this is greatly appreciated,

    Eric

    Hello guys

    I'm sorry to hear that. That's too bad. Maybe you should contact the closest to the ASP and ask if this is known issue. Maybe they learn more about this issue then direct line of agents.

  • Satellite Pro C850-1HD: valid guarantee after RAM upgrade?

    I work with a laptop Toshiba Satellite Pro C850-1HD in the warranty period, and I would like to know whether to extend the warranty for laptop RAM is maintained.

    Thank you

    > I would like to know whether to extend the warranty for laptop RAM is maintained.
    RAM upgrade does NOT affect the warranty.

    Here you can find instruction and nice workaround how to replace Toshiba Satellite Pro C850 modules series
    [Satellite Pro C850 / L850 - Memory Module replacement procedure | http://aps2.toshiba-tro.de/kb0/CRU2603BZ0000R01.htm]

  • Satellite P500-F12 - freezes after 5 minutes of game

    I recently bought a toshiba laptop P500-12F with the specifications below, the problem I have is that whenever I try to start a game like mount and blade or empire total war, the game works for between 5-10 minutes, but then crashes completely and the cell starts producing a strong buzz. The only way out of this is to press the power button until it stops. I don't get the problem with something else that this type of games and I don't know why it does this, any help or adivce would be welcome.

    Bradders.

    Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_rtm. 090713-1255)
    Language: English (regional setting: English)
    System manufacturer: TOSHIBA
    System model: SATELLITE P500
    BIOS: PhoenixBIOS 4.0 Release 6.1
    Processor: Intel (r) Core (TM) 2 Duo P8700 of CPU 2.53 GHz (2 CPUs), ~2.5GHz
    Memory: 4096 MB RAM
    Available OS memory: 4060 MB RAM
    Page file: 1641MB used, 6478 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11

    Card name: NVIDIA GeForce GT 230 M
    Manufacturer: NVIDIA
    Track type: GeForce GT 230 M
    DAC type: Integrated RAMDAC
    The device key: Enum\PCI\VEN_10DE & DEV_0A28 & SUBSYS_FF501179 & REV_A2
    Memory display: 2781 MB
    Dedicated memory: 1007 MB
    Shared memory: 1774 MB
    Current mode: 1680 x 945 (32 bit) (60 Hz)

    Post edited by: Bradders_1

    Hello

    The forum already contains these discussions where notebooks will freeze after 5 or 10 minutes of play. Have you read them?

    Now it s not easy to say what causes this problem but first of all you need to install the latest driver of Toshiba display. Don t use non-Toshiba drivers, as they can cause the overheating!

    Also make sure that you use the latest version of the BIOS and it s useful to clean the laptop time using a jet of compressed air.

  • Satellite P100-219: overheating after memory upgrade

    Hello guys,.

    I've recently upgraded to 4 GB RAM in my laptop, and he did it again.
    Computer laptop stops immediately after awhile. CPU or GPU gets really hot. Works fan CPU, GPU was not used intensely. Simple web browsing/cat/emailing.

    What becomes hot however is part to the left of the memory/wlan compartment. Is it possible that a chipset gets hot after just upgrade memory?
    I tested the memory with Memtest + for more than 3 hours. No errors.

    Moreover, the last time that my phone was in ASP it had returned with DMI saying it's Satellite L20! I dunno if that could be related...

    Thanks in advance for your suggestions,
    mentorek

    You have blown the dust anyway? As you say, maybe another component is overheating rather than the CPU or GPU. The CPU/GPU heatsink can be shared with other chips.

    Have you installed RAM high performance? His best choose RAM that has the same Timings CASE/RAS as the original factory of RAM.

    The name DMI does not cause something like this.

    PS. If you're running Vista, you must pass the BIOS and driver nVidia on the Toshiba site

  • Strange problem with Toshiba Express Media Player on Satellite M115-S3094

    I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

    I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

    The steps included:
    1 deleted recovery Express media player disk partitions
    2. installed express media player
    3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

    Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

    I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

    Laptop works fine when I connect to windows by pressing the power button / stop.

    Can someone help me on this strange question... ?

    Hello

    The whole story is a bit confusing
    First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

    Now something about the Express Media Player installation;
    In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

    In addition, on the HARD drive should at least 150-200 MB of free space available.
    This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

    I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
    In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

    Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

    Could be useful for you!

Maybe you are looking for

  • Re Yahoo email

    I can receive messages with the yahoo mail but can not respond to the yahoo e-mail. I tried another browser and it works just Firefox will not

  • drive hard 300cdt

    Hi alllast month, I have a nice Satellite 300cdt on my desk. I would like to put a hard drive more in (he is now 2 GB). I understand that there is a limit to the size of it. Can someone tell me what size is always supported by this machine? The versi

  • Windows 7 product key sticker damaged by normal use

    I have a G550 and the product key on the underside of the laptop has been worn. I created the recovery DVD but the last disk in the series has been damaged, I have a commercial version of W7 but this requires a product ID valid, which I did not. I ha

  • iTunes does not stop after playing the last song on the playlist

    It was that iTunes has stopped playing after the last song in a playlist. I really liked it. Now, he travels the playlist, starting with the first song, after the last song is played. How can I disable this sort of iTunes for the iPhone goes back to

  • HP Color LaserJet MFP M177 Pro: MFP177 frozen screen energy saver logo

    My new Color LaserJet Pro MFP M177fw still works, but the front is frozen with the logos of saver hp and energy, which means that there are no features in the control panel. I can therefore use it to manually, make copies, or do something that I woul