El Capitan 10.11.6 printer questions

Similar Questions

• Installed at El Capitan and now HP printer does not work via the network

  Installed at El Capitan and now HP printer does not work via wireless network

  Open system preferences > printers and Scanners and select the print tab.

  Then the right or control click on the HP printer on the left then click: reset the printing system

• MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on ex

  MacBook Pro (retina, 15 inches, beginning 2013) El Capitan 10.11.3, Simple question here: I can't open FinalCut Express (4, I believe). The wheel turns for hours. How can I install/uninstall and will I lose all my old films (for the most part stored on external hard drives). Thanks for your suggestions.

  You will not lose anything, but the app if you uninstall. If you decide to uninstall use this app to make sure that all the other files which depends on FCE are also deleted however I can't give you any assurance as to whether you will be able to reinstall so that it works correctly. It is a software that has not been supported for almost 5 years and there are conflicting reports as to its compatibility with OS X 10.11. Can't I test it myself.

  Maybe someone else will chime in with their own experiences.

  Russ

• Office Jet after upgrade of el capitan 4620: 4620 - not printing black

  After upgrade my iMac to El Capitan, the printer does not print black.  I tried all the troubleshooting steps I found, and no solution to the problem:

  1. replace the ink cartridge

  2. check the ink cartridge has ink

  3 reset ink system

  4. clean the print head

  5. aligned to the printhead

  6. update to the latest driver software for El Capitan

  7 restart the computer and the printer

  8 remove the printer from the system preferences, and then added back the iMac

  Other suggestions?

  Anyone else see this problem?

  Hi bevandas,

  Thank you for your answer!

  I know that this printer mixes in order to get a black box, because of the multiple color ink cartridge system. I suggest trying to replace yellow cartridge because it is low, just in case this could be the problem. There was some questions about upgrading Mac OS x 10.11 El Capitan, but not on this issue.

  Otherwise, please Contact HP phone support for assistance. As they might be able to help the process of upgrading your printer. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Good day!

• El Capitan has stopped my printer Canon MP600 to work

  El Capitan has stopped my Canon MP600 printer to work only in the last few weeks after an OS El Capitan upgraded.

  We was told by Canon technical support that refuse to update their previous printer driver Canon, just because Apple have interfered with their existing printer MP600 driver and made deliberately incompatible Canon MP600 printer driver with the last OS of Apple El Capitan, deliberately making useless Canon printer.

  What I can do, I can't afford to throw a little used, works perfectly printer and I have no money to buy another printer.

  How Apple can behave like that?

  Is there anything I can do for this printer works with this terrible operating system?

  Looks like in the site Web of Canon printer drivers arrested MP600 supported by beginning of Canon with OS X Lion mountains (10.8).

  So you have to have a summer of OS X Lion (10.7) or below. All you can do is to go to a support for Mac OS X version or buy a new printer (that you are not).

• I successfully installed El Capitan, but there is a question mark sitting on my dashboard.

  I just installed OS X El Capitan 10.11.3, and it runs fine.  However, in my dashboard, there is a question mark icon.  When I go over it, it says "install OS X El Capitan."  Am I missing something?  I did not complete the installation?  Please notify

  The dashboard, do you mean the Dock at the bottom (or side, if you changed its position) of your computer desktop? If so, it indicates that an application that was once in the Dock is not found. The application of the installer deletes itself after the race; I guess that the alias in the Dock was not successfully removed. Go to the Apple menu in the upper left corner and click on about this Mac: what OS version you see on the screen that is displayed?

• Windows 7 64 - bit Macro printing question

  I have problems printing using a macro in an application called iNews (made by AVID) on Windows 7 64 - bit installed on new Dell OptiPlex 9020 s.

  I've simplified the macro to just {Ctrl + P} {enter} and mouse freezes, keyboard does not (only Ctrl + Alt + Delete), without ANY error messages in the event log.  If I press Ctrl + Alt + Del then Esc, I can get out of the macro and the print job actually ends.  I noticed that the print job is in the queue in the queue, but won't be released only when I press Ctrl + Alt + Delete.

  When I completed the steps manually, the computer is not locked and printing works very well. It's only when I use a macro to print.

  Here are the troubleshooting steps I took:

  AVID contacted and they attempted to help, but it's an OS problem.

  The macro works great on Windows 7 32 bit.

  RAN windows updates

  Updated drivers from Dell

  For PCL6 and PS drivers printing and I tried the drivers updated (but the problem occurs on more than one printer, even Microsoft XPS Document Writer).

  Performed a clean boot (same question at a session of boot)

  Similar macro created in Excel works fine.

  Started the spooler, deleted files in c:\windows\system32\spooler\printers and stopped the spooler

  Any suggestions will be greatly appreciated.

  Thank you

  Karen

  Hello Karen,

  Please keep us updated on the status of the issue.

  As you mentioned are printers on a print server, the question will be better suited to the audience of professionals on the TechNet forums.

  I would recommend posting your query in the TechNet Forums.
   
  TechNet Forum
  http://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Thank you

• LR5 printing question

  I have a question about a printing problem I'm having.  If I print an edited directly the LR5 RAW image, the colors look quite a bit dark, but if I convert the image to JPEG format and then print it, it seems much closer to what I see on the screen.  I have an older HP Photosmart which does not allow me to disable the color management and let the LR to control the output of color.  Is it my printer?  I use a new iMac right out of the box, I have not changed any calibration (I must say that I have seen this question from my old Mac), don't you think that it is the monitor?

  I'm ready to buy a new printer, but I understand the first question.  Any help or advice would be much appreciated.

  Jeff Thomas

  Adjust the brightness of the monitor a lot, brightness + 25 added in picture LR printing Panel.  The result seemed to produce a print that was really close to the screen on edited the image.

• How to get better in the world of print (question General graphics.)

  I didn't really know where to post this I decided that the general section would be nice.

  Here's the thing: I know how to use Photshop, Illustrator, Flash and Indesign (and other adobe programs) BUT what I do not know or never know really about are printed.

  I still see a job every now and then you requiring to be printed loan or possessing printing experience.

  As far as I know about printing is bleeding (usually for business cards) and CMYK is for printing.

  So my question is: what can I do to be professional in printing? Most everything I do is for the web.

  Find out what...

  http://www.adobepress.com/Bookstore/product.asp?ISBN=0321304667

  I have the 1st edition and it is a good starting point.  You will get the overviews on the matrices of the resolution, different methods of printing, keywords and their meanings, etc..  I wouldn't type publications 'real world '.  Instead, focus on authors and people who are proven professionals.  There is so much to learn that he can easily become overwhelming.  The learning never stops.  Take your time and do things.

• El Capitan 10.11.5 download questions

  I downloaded the update of El Capitan 10.11.5 and my iMac now has a gray screen. The completion bar received roughly 60% and then it disappeared from the blank screen. I tried a hard reboot and got the same. Reset the PRAM the screen returned the completion bar was about 50% with a little Apple on the screen then started flashing mouse then keyboard then stop. Can anyone help with my problem.

  Want to say he began to "flash keyboard and mouse", he lost the BT connection?

  It is normal that the status to only reach about 50%, then go to the white screen, it will go at the back of the screen white to a black screen to the progress bar several times during installation.

  If you still have "Install Mac OS X" in your applications folder, double-click it to start it again.

• Anything El Capitan 10.11.4 printing displays only a header and footer or a blank page

  I can't print the PDFs, preview or Acrobat. The pages are made on the monitor. Pages print blank pages. Cannot print copies of TurboTax. Print an e-mail by mail only prints the header - NO CONTENT!

  Hope someone can offer a solution.

  Thanks in advance!

  have you tried on several printers?

  What printer brand, model do you have?

  compatible with OS 10.11.4, drivers they may have changed since your last OS?

  have you tried other PDF files?

  http://www.PolyU.edu.hk/IAEE/files/PDF-sample.PDF

  If all else fails, you can reset your printing system

  Reset the printing on your Mac - Apple Support System

• Clean install of El Capitan, causing all sorts of questions

  Hello

  I decided to do a clean install of El Capitan on my Macbook Pro 13 "retina end 2014 using sudo command to set up the USB bootable stick with the latest version of os x for the Mac Appstore. Installation of El Capitan appeared flawless in its execution and first start went well. Before the installation, I just formatted the disk by erasing the current drive and creating a new partition that I chose to implement the OSX on.

  Everything seems to be normal and familiar, until I try to log in iMessenger and FaceTime, which, in both cases, does not work after several attempts. Either I was told my internet connection has been lost or authentication failed. In addition to these connection problems, the overall performance of the operating system seems to be awkward and not nearly as smooth with my initial configuration to the factory system.

  I started to wonder if the current version of El Capitan available on the Appstore is flawed and broken? Someone else met weird performance / connection problems after doing a clean installation of El Capitan on their Mac recently?

  I can't use my Mac like this: someone in the support of Apple technology to address this issue now!

  Mike

  I did the same install clean, but the Apple server.  I'm having the same problem, however, there are several threads of people experiencing the same problem with the new OS X updated on El Capitan and some who use Yosemite said that they have the problem of too!  It is on the end of Apple

  I use an Early 2011 MacBook Pro 15 "2.0 GHz

• El Capitan & Canon PixmaPro9000 photo printer problem

  updated my desktop iMac late 2012 and ElCapitan and PixmaPro9000 of Canon photo printer computer no more prints of photo program apples with the appropriate color. Each photo is shades of yellow and black. The printer will print black and white word documents. I downloaded the software from the Canon by any other recommendation for this problem, but it does not solve the problem. Help! Please don't tell me I need a new printer

  I would check the configuration of your Pro9000. Please open an application called Information System, located under Applications > utilities. In the left column select printers. If this is the only printer on the Mac, then its information will appear in the right pane. If you have several printers, select the Pro9000 in the upper pane right to view its information in the bottom right pane. Please select this information, copy and then paste it here so I can check it out.

• Printer question

  I am trying to print iron on and cannot find the mirror image of the printer. I have Officejet Pro 8600

  @dinmaxx

  If your printing software does not have the option 'mirror' of the image, you can return the image using paint > save the file under a new name > print the image.

  Rotate or Flip Image files and print - Mirror Image

  Where is the paint in the 10, how to open windows?

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• Thin Client HP T510 printer questions

  So we have thin clients. We have a local default printer installed for the administrator who "invades" on the "Default user" profile (which is great, that's what must happen) when we try to install a network printer:

  1. We disable the write filter
  2. We disable the security for the user
  3. We install the printer network under the user's profile
  4. We invited domain administrator credentials.
  5. We enter the identification information and properly install/test the printer
  6. We restart and allow the connection of the user (automatic)
  7. The printer is there, but it says "access denied, unable to connect."

  Key information:

  1. These thin clients MUST have locally installed printers
  2. These thin clients are not on the field, they are the default WORKGROUP

  This seems like it should be easy to make it work, but I can't seem to find a solution and I have worked on it for over a week now. Thanks in advance.

  Solution:

  Put printer driver software on USB stick and install locally via the setup.exe.  Do not use the software in windows, for some reson he has a problem with striking pilots from the network.  Running the driver software installation file locally worked like a champ.