Satellite M30 sees only 120 GB installed WD 250 GB HARD drive?

Similar Questions

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Portege R500 - install Win XP - no hard drive detected

  Hello

  I just bought a new Toshiba Portege R500 notebook - 12 H with Windows Vista, and I would like to format the hard drive and install Windows XP instead.

  I have a Windows XP CD (the one from my old PC), I insert the disk and start the laptop computer on the installation of the Windows XP CD to load, I get the screen asking me "push F3 to quit, entry to install XP" (as usual).
  But when I click on 'install', it says no hard drive has been detected, and I wonder if I have any additional drivers.

  How is it possible that my 120 GB HD is not detected? It is in a format that does not know Windows XP? Can I get a driver, how can I install it? Can I upgrade the bios?

  Please help me ;)

  Thanks for all,

  Missing driver SATA.
  Very good description how to prepare the CD of facilities, you can find HERE.

  This Toshiba document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  If you have any other questions please let us know.

  Good luck!

• Satellite Pro A210 - error recovery after a new installation of HARD drive

  Hello

  I have a satellite pro 210 (bios v1.6) has died the HARD drive.

  I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!)

  Everything worked fine until the first re-boot, went through the usual stuff:
  Please wait a moment while windows starts for the first time
  Then a windows background, spinning slider with waiting message please, much HDD activity
  Then the sudden error:
  "Installation of Windows could not configure windows to run on a hardware on this computer."

  Does anyone have ideas, what it might be?
  A google search suggests the sata bios settings, but I do not see in the configuration of the bios page.
  In my view, there is a new bios v2 by download - would this help?
  If so how can I install it when the computer does not start vista? Or any other suggestions?

  Thanks for reading.

  Cheers, Stephen

  Hello

  The SATA driver is not necessary if you use the Toshiba Recovery disk because the image on the recovery disk contains the SATA driver.
  So there must be other reason for it.

  In your case, I recommend setting the BIOS settings by default and start over once the recovery procedure.
  Maybe something went wrong during the configuration of the OS if second installation is worth a try

• How to install games on external hard drive applications

  Hello people,

  I have my app game downloaded from the app store called rack 2 & I transferred to my USB key. Noting that the loading of the game takes too long, I decided to transfer it to my external hard drive. After the transfer of the application of game on the external hard drive, it does not start. So, I decided to reinstall the game by downloading it again from the store, but my disk space.

  So, I have in fact TWO problems:

  (1) how can I reinstall the application to an external hard drive? and...

  (2) how to free disk space on my hard drive internal by disabling certain files on "people"?

  If someone could shed some light on me here, it would be highly appreciated.

  Thanks in advance,

  M

  -------------------------------------------------------------------------------- ---------------------

  -System chart-

  OS X El Capitan

  10.11.5 worm.

  MacBook Air (13 inch, early 2015)

  Intel Core i5 to 1.6 GHz

  DDR3 4 GB 1600 MHz

  Macintosh HD

  Intel HD Graphics 6000 1536 MB

  -------------------------------------------------------------------------------- ---------------------

  -External hard drive-

  Backup drive Seagate Plus (external 1 to USB Disk)

  -------------------------------------------------------------------------------- ---------------------

  You should never get too low on your space of hard drive as the OS needs a minimum 10-15 GB of free space at any time to work properly. So, if you do any movie or image/photo, rendering and editing editing works best if you have at least as much vacuum you have temporary files in your project. I can easily raise 100 GB or more temp. files for a one hour film HD, so I keep a lot of empty hard disk space.

  In order to get a few things on your hard drive, the usual space hoggers are therefore, movies, photos, etc. You can move all those who in their library on an external hard drive, and after having checked they are working, delete them from your hard drive.

  Generally, the application work better if they are installed on your internal hard drive; I'm not a gamer, so I'm not familiar with the specifics of the game you're talking about. Search on Google, I couldn't find any reference to the Macs on their website - here, it shows the platforms it is compatible with:

  

• Re: Satellite A100-220 - 250 GB hard drive update

  Bought the new 250 GB hard drive, but with it cant start System. The version of the BIOS is 1.80 I have to update so that it will support 250 GB? I think that's the problem because when I remove the hard drive from the system can start. Can you post the link to the download for a newer version of the BIOS if there is a previous hard drive was 40 GB?

  Thank you

  Hi andmk,

  I doubt that your computer will start if you remove the HARD drive. If no HARD disk is installed the computer is not able to boot and start Windows because the disk HARD, the operating system is installed.

  In any case, what exactly happens if you install the new HARD drive?
  Is it recognised in BIOS?
  Can you do a recovery on the new HARD drive installation?

• Error installing XP on new hard drive - Presaro V3700 Notebook PC

  Hello

  I try to get Win - XP Home installed on a new hard drive, but whenever I try to install xp I get this error. (see below) funny thing is he had xp installed on the old disk hard until it packed.

  The XP CD load installation of Windows right up to the settings window, but stops / crashes with this error.

  The BIOS in this system is not fully compatible with ACPI, contact the system vendor or visit www,hardware-update.com for an update of the bios.  He's going to say a few words about the F7 key, but that does not work.

  I tried looking for a bios update but do not know who or what to do.

  help please

  the computer news

  Portable model = Presaro V3700 Notebook PC

  Number of product = KS413PA #AKL

  System Board ID = 30CE

  Service ID = 00000

  Type of processor = Intel (R) Core (TM) 2 Duo T5550

  CPU speed = 1830 MHz

  Total memory = 1024Mb

  BIOS = F.26

  Serial number =

  UUID = 37596080dcb511dcbb93ad5e1482b70a

  All make us mistakes, said the Dalek climbing out of the garbage.

  Boot from the XP cd than a driver SATA slipstreamed. To the point where you see the press F6_press F7 instead.

  BTW, who has installed XP on the original hard drive, maybe they could help? This model comes with VIsta.

• Dual-boot Windows XP is installed on the external hard drive

  My computer has Windows XP and Windows 7 installed. I added a hard drive with Windows XP is already installed on the computer.

  In order to access additional hard drive, I need to change the priority of the hard drive in the BIOS.

  Is it possible to add a boot option to the Boot Manager screen so that I can boot from the additional hard disk without modifying the BIOS settings?

  First of all, to the best of my knowledge you should not change anything in the bios to access the external drive.

  Second, if Xp has not been installed on the external hard drive while the drive is connected to the computer in question it will not be loaded. Simply, it does not work like that. Even if you install Windows on the outside when it is connected to your computer, I don't think it must configure the boot.ini file, giving you the ability to dual boot when the computer is turned on. You can boot from the external drive provided however your bios supports booting from a usb key. I think that to accomplish what you want, you will need to remove the hard drive of the external envelope and attach it to your computer using an eSATA cable. Then it will be recognized as a regular system disk.

• Can I install programs on external hard drive?

  Original title: external hard drive

  I need to free up space and my hard drive. Can I take MS Works off the hard drive, put it on an external drive and use it or is it related to Windows XP and prevent this use? Same question for McAfee, Adobe and other routines.

  Hello

  It depends on the program you are trying to install. Generally, it does not work. Check if t he program is written to install on a portable hard drive. MS Works will not work if you install it in an external drive.

  Hope this information was useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to install games on extended hard drive

  Original title: Ive bought a large hard drive and would like to know how to install my games purchased on the internet, but also my collection of dvd on my hard drive. Its connected properly approved system it

  Help please try to install my games on hard drive extended as ive bought on line, but also my dvd also collectrion

  Please describe what happens when you try and what you mean by "scope of hard drive. Do you mean an external USB disk? If Yes, then you don't want to install programs on it because it will be too slow. It will be perfect to store your data, however.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Problem with installing Windows on a hard drive, HARD drive does not get detected after installation

  Original title: help with hard drive of the computer.

  Flow of the problem:

  My aunt tried to install windows 7 on the previous copy of windows 8. Needless to say that it doesn't work and it has messed up the hard drive. So, I bought a vacuum. I formatted the hard drive using my other windows computer to have 2 partitions: a boot partition and system partition, and then used the program WinToUSB to install windows on the hard disk. The reason I did it is, because no matter how many times I changed the BIOS in my laptop of aunts, it wouldn't boot from the DVD player to load the windows software. After a few hours, I found WinToUSB. Once windows has been installed, I plugged it into the laptop. For a few hours, I didn't know what to do, because the computer does not recognize the hard drive (he said: "Not detected"). I decided to start from legacy, and then the screen deals

  «intell...» »

  and a bunch of dates, etc all the stuff on the screen to load legacy if you know what I mean.

  He said "not plugged in the media. Check the power cord.

  Then quickly changed screen before I can read almost anything and it goes to the normal windows screen black (with 4 colors). I said to myself, how can he be loading if the hard drive is not detected... Once it is loaded, he brought me to the blue screen (blue screen of death, if you want) I turned the computer on again, always noticing the hard drive was not detected. I ran all the recovery/repair options I could and turned off the laptop. I came back a few hours ago and I loaded the computer again and went into the BIOS.  He said that the hard drive has been detected and said the news about this, as usual. However, at the start of the legacy of windows loading screen, it said still not detected.  I then started to windows to see since it is now detected if that fixes the blue screen. Yet, there is no. I tried to go to the normal windows and screen remains blue. any ideas?

  Hello Chris,

  Thank you for visiting Microsoft Community.

  According to the description, it seems that Windows was not properly installed on the hard drive. I'm not sure how to work the software from third-party manufacturers WinToUSB and reliable installation process is. Microsoft does not recommend using any third party tool to install Windows on your computer, the use of these third-party tools can cause serious damage to your computer.

  I would say to format the hard drive once more and try to install Windows through normal Windows installation process.

  Refer to the section "using the installation option custom if no operating system is installed" in the thread below.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows/installing-reinstalling-Windows#1TC=Windows-7

  If you are not able to install Windows on the hard drive at all, I suggest you to contact the hard drive manufacturer to obtain a diagnosis of material performed on the hard drive.

  Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Laptop with pre-installed Windows 8 - defective hard drive & no recovery/install media.

  Computer Samsung laptop computer laptop with Windows pre-installed 8, came WITHOUT the installation discs.

  I have a desktop PC with Windows 8 and this machine installation disc.
  Would I be able to use the Win8 installation disc provided with the desktop computer to install on a new hard drive in the laptop and then be able to activate the laptop with the product key provided with the laptop?

  Would the Samsung recovery media to restore your computer to its factory condition.

• lost Photoshop 12 on a hard disk crash. want to re - install on my new hard drive

  Need help - I have a valid license for Photoshop and Premeir, MY hard drive crashed and I want to install on the new hard drive... How can I go about it?  Thanks AG

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 12: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html

• I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MH

  I would like to buy and install a stand-alone version of Lightroom on my iMac. I do not want to join the CC program. The CC is not an option for me. I'm iMac late 2009 user, osx el capitan, installed on a formatted hard drive 1 t, 16 GB of ram with1066 MHz PC3-8500 DDR3 SDRAM. Everyone uses LR6 on iMac late 2009? anyone has any experience with el capitan and LR6 osx?

  Hi Piotrsta,

  With the last update of Lightroom, most of the problems have been corrected.

  Also, you can read the following article: Lightroom and El Capitan | Mac OS 10.11

  Kind regards

  Tanuj

• HP m9340f, install a second SATA hard drive

  Hello!  I tried to install a second SATA hard drive in my m9340f without success.  It is a 2 TB SATA drive, it should be compatible, but on the power of the system will not even to the last POST.  No message screen or the BIOS errors.  When I disconnect and remove the new drive, the system is back to normal.

  Anyone have any success installing disks second in this model of HP?  This is the first record additional SATA hard I never put in a system, then am I missing a step?

  Thank you!

  Thank you all for the quick responses!

  I was able to fix this by taking two actions:

  (1) I applied an update for my BIOS.

  (2) I went to a reader from different manufacturers.  A Hitachi 2 TB drive did not work, but a Western Digital works perfectly on the first attempt.  It was with the same cable and connection of motherboard that has not worked for Hitachi.

  Please mark this as resolved issue.

  Best regards

  Bill