Satellite M35x-S161 will not work on battery

Similar Questions

• My Satellite C650-110 will not work

  Hello

  My laptop will not work. It is still covered by warranty Toshibas. The problem is the charger does not work or there is a problem with the connection inside the laptop. When you try and turn on the laptop a yellow light flashes but does not illuminate.

  I really don't want to pay for another charger that toshiba may replace it and it is that I could do without spending money.

  Has anyone else had the same problem.

  Thank you

  Claire

  > It is still covered by warranty Toshibas.
  Contact the nearest Toshiba service provider. Let them test your laptop and exchanging material which must be responsible for this.

• Envy 15 Gen2 will not work on battery / battery won't charge

  Bought a Gen2 envy 15 in April 2010. A few months ago the laptop turns off after maybe 90 minutes on battery. At the beginning I thought it was just the battery loses capacity. A few weeks later, he stops after only 30 minutes on the battery, so I watched the battery more carefully. Several diagnoses show that the battery is fine (still holds more than 99% of the original capacity), so it must be something else. Now, the laptop does not work on battery power at all - I can only turn it on when it is plugged. Everyone knows this?

  I opened the laptop to eliminate the accumulation of dust, and it was fine for a while after that, then I'm sure that I don't miss anything when reassembling it later.

  Thank you!

  Hello eliu01,

  You complete the troubleshooting steps and get this resolved?  I would like to update it please, so I can either close it or help you get it solved.

  Thank you!

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• Satellite Pro L500 will not start on battery only

  Hello!

  I recently bought a Satellite Pro L500 and have the following problems.
  My laptop does not start on battery only. The Green led comes on and stays with the laptop in a gel (nothing appears on the screen).
  The only way to get this light off is to remove the battery.

  Starts EVERY time with AC power connected (with or without battery)-normal lights are displayed when connected.
  Works quite normal, once started - with or without power connected

  SOMETIMES starts with the battery only if I boot in a short time after I've used the laptop
  I tried the static release process but does not work. (hold button power supply without battery or power supply connected etc..)

  After having this problem, I've updated to the latest version of the BIOS but nothing helped
  Tried a different battery and did not help
  Is a Toshiba Satellite PRO L500 T4400 4GB 15 "laptop Win7 - only 3 weeks or so old

  Very annoying!
  Please anyone with a solution?

  Hello

  Try this.
  Remove the battery, disconnect the adapter and then wait a while. I would like to leave it disconnected for about 12 hours.
  Together the two parties again, charge the battery and then remove the power adapter.
  Then try to turn on the unit using only the battery.

  If that does not help, then you should get in touch with your ASP as fast as possible since the guarantee is valid and would cover all the checks of the equipment and replacements.

• Satellite L550D - Configfree will not work

  ConfigFree no longer works on my system. For some reason any he just dropped it and launch more. everything I tried did not work, and still I can not wirelessconnections more (same flashcards don't show the corresponding entry to avtivate the system). As said, I think that configfree has to do something with that.

  What I tried was:
  Uninstall configfree
  Download the program from Supportside
  install the new program

  Well, at least that's what it should be. For some reason, it isn't reinstall this thing. It just keeps telling me to uninstall configfree (?) and when it starts uninstalling (?), it ends with:
  The file 'runregsvr32.exe' is not marked for installation.

  For any other reason, that I can't use recovery-, it said something like "the data has been changed", so I can't use that any (but is not important for me now)

  -> How can I configfree run if I can reuse wireless connections?

  > Well, at least that's what it should be. For some reason, it isn't reinstall this thing. It just keeps telling me to > uninstall configfree (?) and when it starts uninstalling (?), it ends with:
  > The file 'runregsvr32.exe' is not marked for installation.

  Check out CCleaner. This is a free tool and you might find in using google.
  This tool to repair the operating system and registry, and you can use it to remove installed software.

  Then clean the registry, restart the laptop several times, clean again, and then try to reinstall the Configfree again!

  Welcome them

• M100 satellite disk restore will not work, keeps on rebooting the laptop

  Hello

  I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.

  Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
  The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.

  I tried this several times and with main power and with and without the battery while on the grid.

  I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
  I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.

  Any help would be greatly appreciated as I need this laptop for school

  Thank you

  Hello

  Sorry, but one thing in this story is strange. Why load additional driver?

  If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.

  So, if you have this original Toshiba drive please do as follow:
  Start your laptop and press F12 repeatedly
  When the boot menu appears recovery disc into the optical disc drive
  In the list, choose the CD/DVD device and press ENTER
  Follow the menu on the screen

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Marketing my Satellite L40 - 14N will not work

  My son has a portable Satellite L40 - 14N and he started the other day, but it is coming up with a message saying "configuration of updates: stage 3 of 3-0% complete do not turn off your computer... then it goes to"shutting down"then it re starts and comes up with the same message again... continues just is and we cannot enter the laptop...»

  Can someone help us?

  To start your computer in safe mode, try to please. To start press F8 key and when you enter the advanced startup options choose Safe mode startup.
  If it works, wait for the operating system to start and try to use the system restore utility to restore the operating system before the date.

• Equium A60 will not work without battery

  Help!

  My A60 will work on a full battery but when I put the power cord in it, it still works on the battery even when he says he gets the sorce of power and count the percentage until he spends.

  Then I let it charge a big short TI. I got a new battery still, a unit of power too much and it does as an update of the bios.

  It's like the charger is there for the battery.

  I agree with Richard. Perhaps is there some problem with electronic supply power. I think that the technicians can run test or some diagnostic programs to verify if really power electronics is damaged.

  Generally electronic power should recognize the power running and automatically turn off battery power and start charging the battery.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

• Wireless, Satellite A500-17 x will not work

  Hello

  Bit of an issue, the wireless on my laptop will not work. It is certainly a problem with the laptop itself, the router etc are all fine. I can connect to the internet with a cable, but Wireless does just not all. The switch on the front of the laptop, which should turn the radio power, has no effect. Before this problem of switching on the position 'on' would cause icon connection Wireless next to the switch to light up, it's no longer the case. Furthermore, when I tried to check the drivers in Device Manager there are only one option under "Network adapters", which is the "Realtek PCIe GBE Family Controller. Right click and select "update driver software...". ' result in a message saying that the proper drivers are installed. I don't know, but I suspect that there may be a lack of adapter or something?

  Any help much appreciated.

  Maybe some unknown device appears in Device Manager?

  You should have 2 entries for network adapters. One for the LAN and the other for the WLAN.

  By the way: when you set switch WLAN on WE and when you use FN + F8 what happens exactly?