Satellite L550D - Configfree will not work

Similar Questions

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• My Satellite C650-110 will not work

  Hello

  My laptop will not work. It is still covered by warranty Toshibas. The problem is the charger does not work or there is a problem with the connection inside the laptop. When you try and turn on the laptop a yellow light flashes but does not illuminate.

  I really don't want to pay for another charger that toshiba may replace it and it is that I could do without spending money.

  Has anyone else had the same problem.

  Thank you

  Claire

  > It is still covered by warranty Toshibas.
  Contact the nearest Toshiba service provider. Let them test your laptop and exchanging material which must be responsible for this.

• Satellite P30 - battery will not work correctly

  Hi all

  I have a Satellite P30 for more than a year now and overall I am very satisfied with this mobile 'desktop '.
  The worrying thing is that I keep the laptop high time constant to allow room for the fans. (If they get hot the laptop just turns off).

  My question is about my battery about 3 months ago, the problem began, suddenly at random time my laptop can not regocnize battery which mean that even if the cable ca is in hes runnin on battery and goes so goes out after a while. I always leave the battery in the laptop when I use it because the cable ca is not quite stable more unfortunately so I need to keep a book on the cable in order to make it work.
  Is it possible that I can claim a new battery or do something about the problem? It is very difficult when I'm workin and all of a sudden the light just goes and I know that I have a max of 30 min before he died.
  Please let me know what I can do, thank you

  Alexander Wiegand

  Hi Alexander,.

  I don't think that the problem is with your battery, it is more likely to be a bad contact on the ca cable where it plugs into your laptop. In general, the ca card makes an intermittent contact and that the power of fools management system into believing that AC power has been disconnected. It follows that the power, then transfers to battery power and it ejects then until the powers of the unit off.

  I managed to solve this problem on my SA30 anchoring the power cable at the back of the laptop so that there is no constraint on the card.

  With regard to the problem of overheating, computers laptop modern can generate a lot of heat and requires a lot of cooling air to keep things cool. Make sure that the cooling system is cleaned of dust and debris with a vacuum cleaner pipe placed on the intakes on a regular basis.

  Kind regards

• My new Satellite Pro L300 will not work

  I bought a new Toshiba Satellite Pro L300 on eBay. I connected all the cables according to the installation guide. At first he asked my details, then I logged in and it went to a pages where he says he was preparing. Then I was sent to the newspaper in the section, and the same page appeared saying that he was preparing.

  After what happens about 5 times, he went to a black screen where the only thing I could see was my mouse cursor.

  I closed and restarted, I tried to go into the settings using F12. I was not able to work at all, no matter what I do.
  Unfortunately, I don't have a CD of the OS, but it was announced as having Vista as OS and have Microsoft Office Suite on him as a built-in wireless modem, so it was supposed to be ready just to turn it on. Well I can't even turn it on.

  What should I do? How should I do?

  At first, I must say that F12 has nothing to do with all the settings.
  At this point, I recommend using the new operating system installation using the HDD recovery procedure.
  How to proceed as a result of this document, you can find > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When the OS is installed and started up properly first thing you need to do is to create the disc of recovery facilities. "You can do it using preinstalled" Toshiba Recovery Disc Creator. The shortcut is placed on the desktop.

• Marketing my Satellite L40 - 14N will not work

  My son has a portable Satellite L40 - 14N and he started the other day, but it is coming up with a message saying "configuration of updates: stage 3 of 3-0% complete do not turn off your computer... then it goes to"shutting down"then it re starts and comes up with the same message again... continues just is and we cannot enter the laptop...»

  Can someone help us?

  To start your computer in safe mode, try to please. To start press F8 key and when you enter the advanced startup options choose Safe mode startup.
  If it works, wait for the operating system to start and try to use the system restore utility to restore the operating system before the date.

• M100 satellite disk restore will not work, keeps on rebooting the laptop

  Hello

  I have a M100 I need to restore to out of box state. XP is running too slow and after getting some internet pop ups of facebook, the laptop is having issues.

  Now, I tried to run the program of restoration of the drive and it happens with ramdisk boot, then the f6 press to install an aditional drivers, then wait.
  The mouse cursor appears on the screen and it can be moved around, then the laptop restarts just.

  I tried this several times and with main power and with and without the battery while on the grid.

  I suspected it was a problem of hard disk or a boot sector virus, which prevents the program of restoration of the race. However, I tried a new hard drive and it still does the same thing.
  I changed the RAM and still does not. About a year or two ago I had to restore the laptop as the HARD drive died and I replaced it with another hard drive on a different Toshiba laptop and it worked fine.

  Any help would be greatly appreciated as I need this laptop for school

  Thank you

  Hello

  Sorry, but one thing in this story is strange. Why load additional driver?

  If you want to have out of the box to install OS, you must use the Toshiba CD/DVD facilities sent. Using this disk, you do not need to load anything, just start the recovery procedure, let it run and when you're done just restart your laptop. That all s that you do.

  So, if you have this original Toshiba drive please do as follow:
  Start your laptop and press F12 repeatedly
  When the boot menu appears recovery disc into the optical disc drive
  In the list, choose the CD/DVD device and press ENTER
  Follow the menu on the screen

• Wireless, Satellite A500-17 x will not work

  Hello

  Bit of an issue, the wireless on my laptop will not work. It is certainly a problem with the laptop itself, the router etc are all fine. I can connect to the internet with a cable, but Wireless does just not all. The switch on the front of the laptop, which should turn the radio power, has no effect. Before this problem of switching on the position 'on' would cause icon connection Wireless next to the switch to light up, it's no longer the case. Furthermore, when I tried to check the drivers in Device Manager there are only one option under "Network adapters", which is the "Realtek PCIe GBE Family Controller. Right click and select "update driver software...". ' result in a message saying that the proper drivers are installed. I don't know, but I suspect that there may be a lack of adapter or something?

  Any help much appreciated.

  Maybe some unknown device appears in Device Manager?

  You should have 2 entries for network adapters. One for the LAN and the other for the WLAN.

  By the way: when you set switch WLAN on WE and when you use FN + F8 what happens exactly?

• Satellite P200-1EE: HD-DVD player will not work

  HD DVD will not work on my new laptop p200 1EE.
  I read some of the messages to similar problems, it takes hours to download updates of software, firmware etc.
  Configure without success.

  I just received my free HD DVD about 4 days ago and have complained to toshiba.
  I can't even drive coming on the screen as a HD DVD toshibas.

  I can't get the windows media player.
  I want to say that you buy a TV and dvd player and search around for parts to get it to work.
  Its ok, the upgrade of software to get additional features on the material, but to make it work even not.

  All of the suggestions.

  Hello

  Yes, I think I can help you.

  Please update the HD DVD from Toshiba and the firmware of readers!
  Two updates are on the European driver Toshiba page!
  That s all. There is no magic solution!

  HD DVD is a new technology and there are differences between the unique mediums. There are different standards, it seems that this was not known to you

  However, the update of the firmware and the HD - DVD Player update helps resolve this issue!

  Good bye

• ConfigFree is not working properly under Windows XP

  Looks like the Configfree does not work as it should on my laptop satellite. I get a ghost of an image icon with Summit, connectivity, profiles and Q-Connect points. I can't do anything with, then icons on the screen. Connectivity doctor doesn't seem to work. I run Windows XP.

  Toshiba use ConfigFree for years and, in my opinion, this is one of the best tools designed Toshiba. Reading your ad, no one will be able to say with certainty what the problem is here, but if you think it is not working properly it remove the system, restart your laptop and try to install it again.

  If you do not like this tool use Windows settings for LAN/WLAN configuration.

• Satellite A100 - some keys not working not

  Number of keys- & QS will not work on my satellite A 100 can someone help please?
  Thank you BRIJOY

  Hello!

  Short short answer question: replace the keyboard

  The problem is that you keys simple exchange of t. It is only possible to exchange the full keyboard but it should not be so expensive.
  Ask your local authorized service to a new provider and they can swap the keyboard too.

  Good bye

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• Satellite L300-215 - Webcam not working not

  The webcam on my Satellite L300-215 did not work because I downloaded the new software of Toshiba months ago.
  The Chicony webcam is not yet recognized, and it will not install the Toshiba software.

  Two hours with Toshiba technical staff, including their having access remote to my computer, does not solve the problem.
  It seems that this is a very common problem and I tried some of the suggestions on the assignments, but without result.

  Anyone out there have the answer?

  I have two laptops Toshiba, Satellite P200D and Satellite A300, both with webcam and everything works fine. I agree therefore with statement on the very common problem.
  Webcam works well if your laptop is preinstalled with recovery image Toshiba (factory settings)?

  > I tried some of the suggestions on the assignments, but without result.
  What you have tried to solve this problem?

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!