Equium A60 will not work without battery

Similar Questions

• Update of the BIOS has not now my Equium A60 will not work

  I tried to update my BIOS I've been experiencing problems with my keyboard and screen but to halfway through the laptop died, he seemed to be a glitch with the power! ... today obviously it not light!

  Do I need a new motherboard or I can buy and replace the BIOS chip?

  I have an A60-181 PSA67E.

  Kind regards
  Ian

  HI Ian,

  In situations such as yours, the best option is to contact a Toshiba authorized Service partner who will have the necessary equipment for re-flashing your CMOS with the latest BIOS chip. This will be a much cheaper option than to replace the motherboard or BIOS chip

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Equium A60 will not burn DVD - Mat * a replacement UJ-820 s?

  Hello

  My toshiba equium a60 will no more DVD burn.
  Can anyone help? Or I need a replacement dvd writer? Cheers ron

  > I need a replacement dvd burner
  It possible s that CD/DVD drive failure and that only the new would be useful.

  But first, you should try some common solution opportunities.

  -Try using different media DVD because not all CD/DVD are compatible!
  -Try to burn the DVD with another burning software (for example Nero Burning ROM)
  -Remove the drive from Device Manager CD/DVD and restart the laptop. After restarting again the OS should install the drive again.
  -Remove the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  If all of the procedures of this will be not useful so the replacement drive would probably be necessary.

• HP XT Pro Ultrabook spectrum: Spectrum XT Pro will not work without charger

  Hi all

  Summer look far for an answer to this problem. Made an account here to try to find more answers. So Hello to everyone!

  We have an older spectrum XT Pro notebook that I received from another user. When I got up, the battery was dead, and material UEFI scans indicated that the battery needs to be replaced. After checking the part number on the HP PartSurfer's (part number 685989-001), we decided to order online.

  It seems that HP does not have this battery more, so we found a second-hand on Amazon. After a week or so, the battery came, and I installed it without problems. The system is turned on without the charger (huzzah!), so I leave this weekend to recharge before putting to sea.

  This morning, when I came back to check on the machine, the prosecution was capped at 92%. At first, I thought the battery simply need to be recalibrated, but found that when I removed the charge cable, the laptop is dead immediately. A little worried that the battery I received was defective, I ran once again the analysis of material UEFI. This time, the battery has been reported as OK. Very strange.

  I tried updating the BIOS, UEFI material checking, and the drivers on the machine, but none of them make a difference. I unplugged both the main battery and the CMOS battery, but no change in behavior. I have reset the BIOS settings, but there is no change either. If I do a scan of the battery alone or a full analysis, the system reports that all systems are OK.

  The only other thing I noticed is that the battery we ordered has a sticker with part number 686189-001, which does not match the one we ordered. The search of this part on PartSurfer number takes nothing. Apart from this sticker, the battery itself is identical, with the same voltage and the same power and the same number of secondary part of the 685855-1 b 1. I guess that it is possible typo, and batteries are indeed identical parts.

  If anyone has any ideas why this machine is not working off battery power, I am open to try. The system reports to a high battery Windows, but simply refuses to take this battery when I unplug the charger.

  An update:

  So I contacted HP on the battery, and they decided to ship a brand new! After installation, the new battery seems to work just like new. Success!

  Not sure what was wrong with the old, but happy that I was able to get a fix.

• Envy 15 Gen2 will not work on battery / battery won't charge

  Bought a Gen2 envy 15 in April 2010. A few months ago the laptop turns off after maybe 90 minutes on battery. At the beginning I thought it was just the battery loses capacity. A few weeks later, he stops after only 30 minutes on the battery, so I watched the battery more carefully. Several diagnoses show that the battery is fine (still holds more than 99% of the original capacity), so it must be something else. Now, the laptop does not work on battery power at all - I can only turn it on when it is plugged. Everyone knows this?

  I opened the laptop to eliminate the accumulation of dust, and it was fine for a while after that, then I'm sure that I don't miss anything when reassembling it later.

  Thank you!

  Hello eliu01,

  You complete the troubleshooting steps and get this resolved?  I would like to update it please, so I can either close it or help you get it solved.

  Thank you!

• Drive CD/DVD of Equium A60 does not work correctly

  Hello
  I just bought a used Equium A60. The seller reformatted the laptop using the player. However, the player will not play any disc now (I tried the CD, DVD and Toshiba load discs. The Device Manager shows the drive works, but the program tells me to insert a disk. Using advice gleaned on this forum I tried to clean the lens, System Restore, start with the key C pressed, tried F12, downloaded a driver for DVDram drive and finally remove the disk and submit.
  The seller said he always worked well for him and the laptop arrived in perfect condition. All you other ideas?

  Go to Device Manager and remove the CD/DVD drive.
  Then restart the laptop and wait until the OS has recognized and installed the disc again.
  Reboot the laptop!
  Access to the registry editor and select this key;
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Here, you need to remove the UpperFilter and UpperFilter
  Then reboot again.

  I hope it helps

• Equium L40 - 14 l works without battery?

  I'm having some problems with this laptop and try and work, what to do, I need help with the following:

  (1) the laptop turns on and works as usual if the battery is removed and it is plugged.
  (2) the orange charge light was solid for a while and then started to blink before the laptop turnt itself off the power.

  I thought that the laptop should always light being plugged in, even without a battery, but it does not do.

  Any ideas of what could be the cause? I tried another charger, but am still having problems to start.

  Thank you very much

  # Of course. You can use it with AC power only
  # There must be a problem with the power supply.

  Unfortunately I can't give you a precise answer, but if you can't use your laptop with AC power only (without battery) there must be a problem with electronic power supply on the motherboard and you should contact Toshiba service.

• My C50-A-1DV Satellite will not work without power

  Hello

  I have a new Satellite C50 A 1 DV.
  It doesn't work unless it is plugged.

  Anyone know if that is correct?
  It seems odd.

  Also the far left in the front (AC IN) never turns on.
  Is it OK?

  I would be grateful if someone could put my mind at rest!

  Thank you
  JO

  > It does not work unless it is plugged.
  > Anyone know if this is true?

  No, this isn't correct. If the main battery is fully charged, the laptop must run also without the power adapter connected.
  In case, the battery not charging properly, get in touch with certified maintainer Toshiba in order to check the battery and if necessary replace it with another, a new.

  Greetings

• Equium A60 will not wake from sleep mode

  Hello

  I have an Equium A60, my laptop is entered 'sleep' mode and when I pressed the button that flashes orange that nothing happened, after trying a few times still nothing happened.

  I decided to take out the battery to try to recitify the problem. Unfortunately no power now lights. All of the suggestions.

  Hello

  Strange.
  You said, you have removed the battery, but you left it for several times?
  Disconnect the power adapter and remove the battery from the laptop. Wait 15 to 20 minutes, and together the two sides again to the laptop!

  Please post again if the laptop works again!

  Good luck

• Equium A60 does not work properly with the Logitech Quickcam Fusion

  If someone managed to use a webcam Logitech Quickcam Fusion with an Equium A60?

  I installed the latest available drivers and software and most of the time it screws right up to the operation of the computer. He ends by crashes so bad that I can't recover even using Manager Windows task! If I leave the USB cable connected to the PC, 9 times out of ten, it won't boot into Windows, until I have remove lead :(

  I installed the same software and drivers on my desktop PC and the device works very well every time and the boots OK with the camera connected to a USB port.

  Two computers use Win XP with SP2 and all updates.

  Hello Bill

  Do you have problems with the USB ports if you are using other devices? I really don? t know what can be the problem. Check the Logitech SUPPORT PAGE

  Maybe you'll find some tips there.

• I continue to have reset Firefox, my address bar search will not work without the constant delivery in all; config

  I had to reinstall all my programs and for some reason I have problems adding and maintaining my address bar search option as well as maintenance of my Google search engine. I deleted Yahoo 4 times in the search box and I went in: config to change the engine and the address bar search whenever I start Firefox. It will not stay on-site every day. Can anyone help with this?

  Hi pmnewell,

  You should read the article How to fix preferences that will not save.

  Hope this helps!

• Equium A60 will not start

  Hi, I am despartely needing help with my A60 equium that won't start. When you turn the button lights up, fan and starting, but then in a few seconds the cutting power. I tried different sources of energy, also just by using ac power and battery just all produce the same results. I had installed a memory chip a few months back and thought it might be that, but when I took it off the laptop has always been the problem.

  Is there that anyone may be able to help me with this problem? Thank you

  TAF

  Hi Michael,

  The first thing that happens when your, press on the power button on your laptop, it's that the CMOS chip (which contains your BIOS) through a pre-deignated POST (Power On Self Test) process that verifies the functions of the material of base components after what the BIOS will be charged which will lead in turn to the operating system itself being started.

  If a failure or a problem occurs during POST and then power on the sequence stops (usually after a series of beeps are emitted that are coded to help the diagnostic process. The actual beep codes are specific to the manufacturer of the CMOS/BIOS chip.

  If you receive no all audible sounds, then it is likely that the problem is very early in the POST process and may indicate a problem with your main card or your electronic internal.

  You can try to remove and and reinstall devices such as RAM memory modules, hard drive, optical drive, etc to see if this corrects the situation, but if not then you will need to take the device to authorized, Service partner who has the diagnostic equipment needed to perform accurate control.

  Kind regards

• Quad dv6t-7200 envy: laptop does not work without battery

  The computer will run on battery but battery does not charge when it is plugged.  However, the battery may charge if I turn off the computer or if I close the lid.  In addition, the computer does not at all with the battery removed and just the power supply plugged.  So, I know the power supply work it will charge the battery if the computer is off, but it would be nice if it would charge when the computer is turned on.  I also tried the "hard reset" procedure, but it failed.  The charged battery (9-cell Li ion) can run several hours depending on usage.

  Hi @gdpuffs

  Welcome to the Forums of HP Support!

  I understand you are having some problems with the laptop battery, or it turn on/off with the battery removed.

  You connect via the electrical bar/surge?

  Have you tried to connect directly to a wall outlet, or a wall outlet different, to try to eliminate the possible problems power connection?

  Using and testing the power adapter AC
  Improve the performance of the battery (8, 7, Windows Vista)

  You have a power to test with another adapter, and/or a spare battery to try?

• Problem with Site - domain will not work without "www."

  When you visit the Web site without the WWW prefix, you are taken to a "process of development . "page I have tells me the webmaster has not added a Web site on the server. "

  However, if you put the prefix www it loads immediately. Just published on-line site and I realized my nameservers of Godaddy for iPage. Any ideas on why this is happening?

  
  

  http://mtbamg.com/

  http://www.mtbamg.com/

  Hello

  Just check the links on my machine and without www works.

  

  In my view, clear the browser cookies that will fix it on your machine.

  Kind regards

  Vivek