Satellite M40-129: how to run the SRS TruSurround XT?

Similar Questions

• Satellite L300-129 - how to increase the video memory (shared)

  Yesterday I bought TOSHIBA Satellite L300-129

  AND I WANT TO ASK SOMETHING:

  I want to share some memory to improve the proceedings of VGA card.
  I know that I need to do from the CONFIGURATION of the BACK but I can't and I need to improve my VGA card because the default is so so small... I want to give him some PART of MEMORY (RAM) SYSTEM

  PLEASE I NEED HELP

  THANK YOU GUYS;

  Hey Buddy

  Unfortunately, I doubt that you can allocate a portion of system memory to video memory manually. AFAIK this sharing process is controlled by the driver for graphics card and all run automatically.

  On the other hand the graphics card driver could assign more memory for video card if the system memory could be upgraded.
  In other words the higher system RAM superior video RAM.

  Welcome them

• Satellite M40-237: how to connect the mobile phone with Bluetooth

  I have a new Noki 62333 and I have a Toshiba Satellite M40 - 237. I have a big problem with the connection between them. I put t know how to turn on bluetooth on my pc. Can you help me???

  Hello Iva

  A friend of mine has Satellite M40 and I know that this unit is shipped without BT module. If the unit has BT module, you will find labels of BT on the underside of your laptop.

  To establish a BT connection with his mobile phone that he uses the key USB BT.

  By the way: fact Iva comes from Zagreb, Croatia?

  Good bye

• Re: Satellite A200-1ZF how to run the Toshiba face recognition system

  Hello

  How can I use on my Satellite A200 Toshiba face recognition system?

  The only problem with this software is the program do not see my cam.
  I mean... he see cam, but when I try to save the new face in system then I can read something like "the webcam is currently used or there is problem with hardware.

  So I turn off the webcam toshiba utility, but nothing has changed.
  The hand of the webcam is running correctly. Her webcam Chicony as in the series of toshiba A300 same driver is the same (date, time, number, series)
  So if someone knows what could be wrong please answer...

  Thank you
  Good bye

  Hello

  I checked the download page for your laptop Satellite recognition tool and the face is not available, so I assume that you downloaded it for a different model of laptop.
  It is not so important, and I think it should work anyway.

  I have more Satellite P200 and he was also delivered without face recognition tool. I installed it anyway and it works perfectly. My laptop have factory settings and camera Assistant software is DISABLED.

  Your laptop is installed with the recovery image too?

  Try to remove the preinstalled face recognition software and remove the webcam in Device Manager, restart your laptop and try to install it again. It works on my laptop and I see no reason why it shouldn't work on your too.
  On this forum many people asked if this software can run on older models of laptops and a lot of people have confirmed that it works well.

• Satellite M40 - 129 stops starting after the Toshiba screen

  Hello
  My M40 continues sometimes to start after the Toshiba screen. He stops and all I see is the blinking cursor. No Error Message or something else and normal boot from the HARD drive. Boot from CD (for example. Œuvres of Knoppix). This problem sometimes occurs and traceable for me isn´t.

  Best regards
  Spoony

  Hey Spoony

  Unfortunately on this path, it is not easy to say why this is happening. Each user has a specific configuration OS and we don t know how your operating system is configured.

  You can boot OS in safe mode? If Yes check what the problem may be a little. If there is anything you can do I recommend you save all your data and preinstall unit using rescue media. If you do this I recommend also to create two partitions.

  Don t compare WXP and Linux startup procedure. As you know that Knoppix using just the RAM and no HARD drive for the race.

• Satellite M40-129 - speed WLAN

  I have
  -Satellite M40-129: Centrino PM730 / Win XP Home / 15.4
  -Intel BIOS: Version 1.20 / 1.05.41
  -WIFI: Intel (r) PRO/Wireless 2200BG Network Connection, Version 9.0.1.9
  -Connection to the Internet by the provider Arcor 1Mbit / Germany

  My connection to the local network is of about ~ 110 KB/s.
  My WiFi is of about ~ 60 KB/s.

  Arcor support sent me a technician to check my connection.
  The connection is good. His laptop WLAN gets ~110kb/s
  But my WLAN connection is bad :-(

  How to increase speed WLAN?

  -Aykut

  Hello

  Check the properties of the card wireless in Device Manager. On the Advanced tab, there is transmit power setting. I hope that it is defined at the highest level. Your card is standard g and it should work up to 54 MBit per second.

• Satellite M40-129 and drivers Win7

  Hello

  I just installed Win7 on my Toshiba Satellite M40-129. It was really hard... Windows refuses to complete the installation until I deleted pcmcia.sys in the windows system folder.

  Now I have the problem that my pcmcia cardbus is working nor my SD card reader. As soon as I ask for Win7 to update driver PCMCIA, the doesn´t of the computer unbootable until I have again to remove pcmcia.sys.

  Now my question: I can live with having one for not working the PCMCIA port, but there all the drivers available for windows 7 and the Cardbus SD?

  Thank you very much.

  Technohead

  This old Satellite is not supported for Win7 and you won't find any driver for it. It is not easy to configure the hardware on these old books but Win7 has good drivers base and, after several Microsoft updates most of the equipment must be installed correctly.

  What you can try is to try to install the driver designed for another model of laptop. Perhaps satellite A100 or Satellite A200. I put t know if this will help but you can test it in any case.

• Satellite M40 - SD card stuck in the SD card reader

  Hello!

  I have a Satellite M40 and today I had the bad idea to use the Toshiba SD card reader.

  I inserted the card into the slot and he's going to profoundly inside. Try to get only back further by pushing.

  Now the cards is aprox. 2cm inside the slot and there is no way to get it out.

  This must be a joke. Please tell me where the secret button should get out of this card here. I let it go, really...

  Thank you
  Fritz

  Hello

  As much as I know Satellite M40 has no SD card but media slot and it supports various media cards. Of course, you can not use all the cards available on the market but only supported formats.

  Zim wrote very good explanation of how it works. Of course, with compatible cards only. Issue described can't happen with a SD card. It is too big and may not come 2 cm inside the slot.

  I'm afraid that you have used the mini SD card. Am I right about that?
  This card cannot be used without an appropriate adapter.

  Bad thing is there is no secret button. :(

• Adapter Satellite M40 - 129 Centrino PM730

  Hello

  I have the portable 'Satellite M40 - 129 Centrino PM730' computer
  I need a 2nd power adapter, because I'm working on 2 places (and I'm lazy to wear)
  The one I have is model Liteon: PA-1750-08.
  (1) is the only model that works, and that another one would also work?
  (2) I want to buy it online, what other adapters are also compatible for my laptop.
  I have no idea for the "key words" I can search in google or ebay?
  (Currently the results I get for my research are not so good.)
  (3) for example, I found Liteon model: PA-1650-02. This would also work with my laptop, is there any mapping?

  Thank you
  Aykut

  Post edited by: aykut76

  HI Marc,

  Please visit the following link. The adapters are listed on the bottom after the batteries.

  http://www.computerbatteries.co.UK/Gb3/m/Toshiba/Satellite-M40.html

  Kind regards

• When I'm playing games like Fifa07 Satellite M40-129 freezes

  When ia´m to play games like Fifa07 my phone freezes from time to time. I have a Satellite M40-129 with the latest version of the driver 6.14.10.6525.

  I get the error message (German): http://img265.imageshack.us/img265/2337/grafikkartentreiberdf9.png

  Dxdiag: http://img508.imageshack.us/img508/2250/grakatreiberup4.jpg

  Isn't there anything I can do to avoid those who freezes.

  Hi Sascha

  Is the laptop freezes only when you play this special game or it freezes by other applications, games, etc?
  Don t know exactly why it happens, but if the laptop freezes only during playback the Fifa07 then it might be a problem of compatibility of graphics driver with this game.

  Do you use the graphics driver for the Toshiba page?

• Satellite Pro 4200 how to avoid the mistakes of the ACPI

  Satellite Pro 4200 how to avoid the ACPI errors after installing SP2 for windows XP Prof
  The problem is that my computer after installation service Pack 2 need about 15 minutes from time of shoutdown - what should I do to avoid this problem.
  Piotr Plecke

  Hello
  in this case it would be interesting what Type of laptop it is exactly.

  You will find this model on the bottom of your laptop. There is a review of it.

  Some models have a Bios update available, others not, for example.

  Please send additional information!

  Good bye

• Lean how to run the stop code when the highest level VI ends

  Hi people.

  I am a newbie of LV with 30 years of experience in embedded SW engineering.  I searched for how to run the stop code when a VI of highest level ends.  I found many examples, but they are horribly complicated.  A little birdie told me that such a model of simple design should not be so compilicated.

  My application is an application of high tension control to disable all HV checkpoints when the SW ends.  My VI code is running in a while loop with a stop button that leads out of the loop.  I can easily accomplish my requirement by programming with a sequence of plate that runs after the end of the main loop.  The technique of flat sequence does not work when the user clicks the Cancel button in the toolbar of façade, more than that market when the user clicks the close button of the application (X button) when you run the exe application.

  Can someone tell me please a simple technique, the code example that can show me a lean and elegant way to accomplish my task?  It doesn't have to be an obvious solution (for example a stop induced watchdog seems simple enough).

  Thank you - John Speth

  1. place this code in a VI:

  (also attached)

  Calling code in your VI of highest level like this:

  

• How to run the VI developed in labVIEW 2011 in its previous versions

  Hi all

  I am currently using LabVIEW 2011 in my PC at home.

  But, all my school's computers are installed with LabVIEW 2010 and 2010 SP1.

  How to run the VI developed in LabVIEW 2011 in its previous versions?

  Is there any conveter why?

  Concerning

  Prasanth T

  Open the VI in LabVIEW 2011 and use the file menu option, save for the previous Version.

• How to run the Extendscript .bat file?

  I have a file with some instructions .bat and I want that it runs from Extendscript.

  How to run the Extendscript .bat file?

  I tried execute(); order and it seems that .bat ran but no result, but when I double click on the .bat file all worksout very well.

  How used runtime.exec () extend the script?

  Can I communicate with Java JDK thru ExtendScript and run commands such as runtime.exec ()?

  can someone please?

  You can do it like this:

  var batFile = new File("C:\\path\\to\\my\\batfile.bat");
  batFile.execute();
  

  Note that this will only work if your system is configured in such a way that by double-clicking the .bat file runs it in reality.

  You can also use

  system.callSystem()
  

  but note that this is only available in AE.

• What is tdrc.tdrcfacade and how to run the installation wizard?

  What is tdrc.tdrcfacade and how to run the installation wizard?  My desktop creative cloud application does not open properly... it is just a blank window.

  Much obliged,

  Angiecrichards@gmail.com

  ! !

  Are Angie, you a blank white screen? What version of OS are you using?

  Here's what you can try:

  1. Blank white screen. Sign in | Creative cloud Packer
  2. New application Cloud Creative unusable: it is empty!
  3. Creative cloud Packager white screen after the Adobe ID Login
  4. Re: screen creative black cloud

  Waiting for your response.