Satellite M40-133: problem starting after a stop

Similar Questions

• Satellite C670 problems start after upgrade of Windows 10

  Hi all

  I made an upgrade of Windows 10 but after that my notebank satellite C670 has problems starting. It is always after the Windows updates were installed. It displays the logo of Win, followed of a blue screen. After several ignitions and extinctions I can once again the password login screen. Have already reinstalled Windows 10 because I did not come to the login screen more. But the problems are still there with ignition and extinction attempts it works. But this isn't a solution. You have ideas - drivers for Win10 or bios? Thanks for help

  Hello, I have the problem of the grandmother after the installation of Windows 10 I have nothing white screen
  Impossible to do a spanking Granny restore F8 or F12 nothing to do
  If someone gives you the solution I'm interested
  Thank you, CDT

  
  Validation has been translated by Google Translator

• Satellite L300 - will not start after the installation of Skype

  My Toshiba Satellite L300 won't start after installing Skype.
  This happened to someone else, and can I do?

  Thank you.

  I think Skype is probably the most used messenger and ideal application for communication.
  It is professionally designed and programmed. As you know in recent years, it has been offered in many different versions and it is always better and better.

  So I think that Skype itself is probably not the problem. I know that a lot of people also use Skype and I've never heard problem described.

  Anyway, what you can try is to remove Skype and try to install it again. Try also push the BONES at that earlier time. Maybe some Microsoft updates are responsible for the stability of the software.
  It's really not easy to say what the problem is here.

• Noron 360 sometimes cannot be started on Windows 8 when starting after a stop!

  Hello

  I have a desktop computer running Norton 360 first Edition version (current) 20.4.0.44 with the latest definitions for viruses on Microsoft Windows 8 Professional with Media Center. Norton 360 , sometimes fails to start on Windows 8 , when starting after a stop.

  Since I first installed the new version of 'version-less' 2013 Norton 360 on Windows 8, it sometimes does not start at startup after a stop and did not bother to mobilize support for that matter because I thought that Symantec or Microsoft could be aware of the problem and that an update or a patch will be available soon. Norton 360 prompted me to apply a new patch today, and after applying the patch, I have realized that the amended version of the version 20.3.0.36 to version 20.4.0.44. Moreover, I also noticed that the aforesaid problem with Norton 360 persists, and if my memory is good, Norton 360 sometimes also does not start after the resumption of hibernation. I used to put the computer to sleep and I never have this issue when hybrid sleep. For Norton 360 upward and run again, I usually just give the computer a reboot.

  I believe that the function "quick start" in power options Windows 8 are originally Norton 360 sometimes fails start. I haven't noticed this problem on computers that are running Windows XP or Windows 7. If Symantec or Microsoft may arrive at a solution to this problem without having to turn off the quick start of Windows 8feature, I would be very grateful!

  Kind regards

  Arthur Durand

  Hi Doug,.

  Kindly let me know what Norton product, you try to use, and if download you the latest version of the internet, or you install a version earlier than either downloaded or a disc? Please also post the specifications of your computer and operating system incl. architecture and the edition you are running.

  Regarding your question: are you affected by the same problem that I did? Only Norton only lack of start from time to time, or Norton fails it run continuously?

  If Norton sometimes does not start on a computer that is running Microsoft Windows 8:

  Disable the "quick start" function in Windows 8 by going to the bar of charms > settings > Panel > material and audio > Power Options > Choose this as the power button , then click on change settings that are currently unavailable, uncheck the enable fast start (recommended) and click on save changes. Restart your computer to test if Norton starts up. If Norton still does not start, uninstall Norton completely, restart your computer, download and run the latest version of Norton removal tool from Symantec website, computer restartyour once more. Then download the latest version of your Norton product either downloading the trial, or you connecting to your Norton account if you have a valid subscription and clicking on the button to download next to your subscription. Install the latest version of your Norton product and manually run the direct updated until all the updates and hotfixes without restarting have been installed and no updates are available before stopping or restarting your computer!

  If Norton does not at all on a computer running Microsoft Windows 8:

  Uninstall Norton completely, restart your computer, download and run the latest version of the Norton removal tool from Symantec website, computer restartyour once more. Then download the latest version of your Norton product either downloading the trial, or you connecting to your Norton account if you have a valid subscription and clicking on the button to download next to your subscription. Install the latest version of your Norton product and manually run the direct updated until all the updates and hotfixes without restarting have been installed and no updates are available before stopping or restarting your computer!

  Please feel free to ask me more questions about, or contact me if you have problems, uninstalling, reinstalling, downloading, install the latest version of your product, Norton , or if you are having trouble updating your Norton product! I would also gladly provide via TeamViewer remote assistance, if you need my help!

  Please mark this answer as useful and/or answered if you found my answer helpful and/or my reply has answered your question!

  Kind regards

  Arthur Durand

• Error of ORA_12514 open from starting after a stop, just improved 9i to 10g

  Hello
  
  Noobe here, once again! See you soon and good new year to all!
  
  How can I modify script to start db which was extinguished before the backup?
  
  We are experiencing a problem with backups, failure is running SQL * more start after his stop. I upgraded with success our 9i and 10g, 10.2.0.5.0 on Windows server 2003, 32-bit edition. We have a back_script.bat that runs only modifications I had to make in this context were the names for the new Oracle services, but this isn't a problem. When I saw the actions in the command file, it fails to sql > startup open; action, get the error "ORA-12514 TNS:listener does not currently of service requested in connect descriptor" which is different here between 9i and 10 g that now it does not work? Commenting on the line calling our oracle_stop_start.sql I get successful > exp dumps, but it could be running process because I'm not just prior to export.
  
  I have a complete picture of the physical server running in a virtual one that I am able to test. I hope that I won't put too much info here, but here is some information! The file batch and little stop_start script date from prior to my participation.
  
  Here are the relevant passages of our backup_script.bat:
  
  SET NLS_LANG = AMERICAN_AMERICA. UTF8
  SET ORACLE_SID = wind
  
  net stop Windchill3_MethodServer (the third application for the part that uses the database of the wind)
  
  @D:\ptc\windchill\backups\oracle_stop_start 'system/manager@wind as sysdba' sqlplus
  
  owner system/manager@wind exp = file=...\oracle_backup.dmp...etc comments, etc, etc.
  
  
  This is oracle_stop_start.sql
  
  stop immediately;
  startup, open;
  quit smoking
  
  
  As stated previously, this worked at least since 2007 where recent changes have been made in the batch file. Now, it will fail to sql > startup open; throw the ORA-12514 error. I can reproduce this execution of each statement in a DOS shell. The command shutdown closed, dismounts and stops the database. I tried to change the start statement for sql > START DISCOVERED wind. but who makes no difference. I found that if I get sql * more and reconnect / nolog (in the same shell window) so I can restart the instance, what I do is:
  

  /nolog sqlplus

  sql > connect sys / * have sysdba;
  SQL > startup open the wind;
  
  This starts the Oracle instance successfully, mount and open the database. Otherwise, how would I do that? I certainly can duplicate these actions, by adding the lines necessary for oracle_start_stop.sql, but is there a better and cleaner way to do this? Right now, I just want to these existing scripts. Once this is done, then I'll study and learn more about RMAN and datapump export/import and update our backup procedures.
  
  The reflections and suggestions?
  
  Thank you
  Tom

  It may be a difference in behavior between 9i and 10g. Looks like you connect through sql * net (sqlplus "system/manager@wind as sysdba), then the parameter ORACLE_SID is not part of your connection. When the database is shutdown you are no longer connected to a database. When you issue the command to start the ORACLE_SID is not defined, so there is no specified service.

  If you run this on the database server, try setting the ORACLE_SID and then run your script like:

  {code} sqlplus ' system/manager as sysdba' @D:\ptc\windchill\backups\oracle_stop_start {code}

  and you should always have the service for your connection.

  John

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Satellite M40-244 - cannot start from CD after driver change

  Hi all

  I have a Satellite M40-244 and the original DVD drive is faulty. So I changed the drive with one that is exactly the same (same brand, same date of manufacture).

  Under Windows, the new disk is recognized and works perfectly. However, when I try to boot from the CD, I am not able to do. I successfully changed the boot sequence in the bios, I tried all possible combinations without success.

  One thing I remember is that when I tried to boot from the faulty driver, I got the message 'Not bootable CD' (the tested CD is bootable and tested on other computers)

  Any idea anyone, I desperately need to install a new OS. :-(

  Hello

  I doubt that you can boot from CD t if your drive works properly in Windows...
  You can try another disc of starting, for example the Toshiba recovery disc or the disc from Microsoft, please?

  Alternative try to load the default settings in the BIOS.

  Good luck! :)

• Satellite M40: Win XP install after crash problem - ser.number system

  Hello

  I would ask you what I'll do. I bought new computer toshiba satellite m40 laptop about 5 years in London.
  There was no Win XP Recovery cd (no partition recovery on the hard disc as well), just cd with drivers of toshiba in the box. Now my system crashed.

  Took me a long time to understand what it was. (BSOD - 'not ACPI-compliant') I almost tried everything same format of HARD drive.
  Later I completely dismantled cell, cleaned up the dust inside and it works again - no BSOD.

  Now I need to install my WinXP back. So I downloaded Windows XP service pack 3 CD and tried to install it.
  It won't take my serial number I have on a sticker on my toshiba.

  Please help me, what should I do?

  I paid for WinXP (System was included in the price) and now I can't use it.

  > There was no Win XP Recovery cd (no partition recovery on the hard disc as well), just cd with drivers of toshiba in the box.

  I put t think that recovery disk came with the laptop.
  Recovery disk shipped with the laptop from the M40 because it s an old series of laptop and drive HARD recovery was not available on this old laptop series. If HDD recovery is not available and that the Toshiba Recovery Disk Creator was not preinstalled, then you will always get a disc of recovery with Notepad.

  Therefore, I am sure this recovery disk was part of the package as the other disks (disk s, tools and utilities in Toshiba driver base) were part of the package.

  The point is that the serial number which is a space at the bottom of the unit belongs to the operating system on the recovery disk.
  Generally, you may not use other Windows systems.
  The recovery disc has already been activated, and therefore, it was not necessary to activate it again.

  Please check this page of order recovery disk Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx
  Here you can order recovery disks, but I do not know if your laptop is still supported because it 5 years.

• Satellite M40 does not start

  I have several problems with my Satellite M40-149.
  When to stop crashes on a blue screen.

  Almost impossible to start. After a few shakes and if its my llucky day, it starts, but in most cases crashes to the Toshiba logo "in touch with tomorrow" with the four symbols for hd, cd, floppy and script. I did all the tests, I could find, there is no virus, the hd is ok (I tried several) and after successfully
  start the screen looks ok to me.

  I even tried Linux on another with almost the same results, very difficult to start.
  Is there another test, I could do (except the Toshiba test)?

  Any suggestions on where to find are welcome!
  dimlog

  Hi dimlog.

  This seems a bit strange as a hardware problem. I can t imagine it has something to do with the software, for example. If the computer laptop doesn't boot correctly and freezes on the screen Toshiba (BIOS screen) something wrong with the hardware.

  I m not a technician but maybe the motherboard is the reason for this. But to make sure that it is the cause of the laptop should be checked by a technician of the laptop.

  If you can fix it yourself, also have a look on eBay for second-hand parts they are cheaper as new parts.

  Good luck!

• Satellite M40-256 - error starting by CD

  Hello

  a well known friend has Satellite M40-256, which Windows problem (error during the update and the manipulation of her children).

  It does not have an external Toshiba FDD or ODD. This laptop is also no built-in floppy drive. Buying one for that matter? NO.
  The boot priority has been changed: CD-network-HDD.

  I tried another Toshiba no ODD (in BIOS not mentioned/found) of brand
  The STRANGE original works/boots in another pc (via an adapter) very large.
  I tried several CD/DVD to boot from (error is displayed): moment-Linux such as knoppix, suse and other windows CD, recovery CD,... without success

  Each time the same result: the laptop has a black screen, the STRANGE is accelerating and after about 3 to 5 seconds, windows starts with the black progress bar.

  I also tried to press C to force startup from the CD.
  Some time previously, I had only access to windows in safe mode. But after uninstalling some updates, it ends with a license problem. This problem can be solved only by starting windows cd via cd.

  It has a bios Toshiba 1.00 (interesting, seems old enough).
  I'm trying at the moment to start the network. The Toshiba shows some messages regarding success/failure at startup via the network or a CD?

  Defined execution bit one influence on behavior?
  Does anyone know a solution to windows startup?

  Thanks in advance

  Check the instructions posted by Akuma.

  If it doesn t work I think that the CD/DVD drive is faulty and must be replaced. Contact the nearest ASP that you can find on the Toshiba site and ask for a replacement.
  It of important that you buy a disc that is compatible with the laptop but the ASP that will.

  Good luck!

• Satellite P300-133 - problem installing Win Xp

  Hello

  I have a problem installing win xp to Satellite p300-133.
  To resolve this problem, I have tried the solutions:
  switch to ahci mode in bios and incorporating storage drivers compatibility intel to the installation cd xp with nlite, but none of them solved the problem.

  Laptop computer starts from the cd of xp and xp installation says "program Setup inspects your hardware configuration" and then a blank black screen comes.
  After that, the installation does nothing and waits indefinitely.

  Any ideas on this problem? Thank you.

  Hello

  > switch to compatibility ahci mode in the bios and the integration of the storage drivers Intel to xp with nlite installation cd, but none of them solved the problem.

  The two methods are good!
  You can install the Win XP without drivers Intel Storage Manager (SATA drivers) but in this case the SATA mode must be on compatible mode.
  It works for sure!

  The second method is the installation of the SATA drivers with nLite (drivers can be integrated into the new drive Win XP).

  I put t understand why this doesn t work on your laptop. I think it's a problem with your Win XP drive. Contains this Win XP SP2 or SP3?
  If this isn't the case, then you should use nLite to include min the Win XP SP2.

  Check it!

• Re: CDrom on Satellite M40 will not start

  Hi all

  My cdrom on Satellite M40-142 drive won't start!
  If I choose to boot from the dvd/cdrom, always my laptop boot from the disk. In my view, is a bios problem. Is it possible to reinstall my BIOS?

  Thank you very much

  Mario

  Hello

  > my m40-142 cdrom drive won't start!
  > If I choose to boot from the dvd/cdrom, always my laptop boot from the disk

  The possible reasons:

  1. it does not work. Is it read cd/dvd discs when you insert the?
  2. the cd/dvd disc you insert (ithink, you're talking about windows disk) not bootable.

  > . In my view, is a bios problem. Is it possible to reinstall my BIOS?

  Yes, you should check for Bios on the Toshiba driver page:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite M40-285 - CPU overheating after the accident with water

  Hello everyone,

  I have a Toshiba Satellite M40-285, and 2 days ago, my girlfriend dumped a cup of tea on the keyboard... The computer turns off after a few seconds. Immediately, I put the laptop upside down and disassembled parts. There was some liquid inside (especially inside the speakers under the keyboard and where is the DVD unit). Other parts (CPU, memory, wireless card, hard drive area) were completely dry. I have it with napkings and dry with a hair dryer (later I read that I shoud never use a hair dryer...).

  The turs laptop on one seems to work fine (only the first screen where it says toshiba remains more than normal long (15 seconds or more) before entering windows). But the problem I have is that the CPU gets overheated and the laptop shuts down after 5-15 minits of use. I'm getting attention via the RightMark utility I said "* Core overheating * ' and the temperature always between 45 - 55 c

  I replaced the thermalgrease but the problem remains. The CPU fan works (I think that the two speeds). The heatsink is very hot after the computer turns off (it burns my fingers if I touch)

  What could be the problem? * Is the processor damaged? Can be a problem in the motherboard? *
  I don't know what to don't know because is not woth the money to send it to the technical service, but I can't buy a new laptop now...

  Hey,.

  I m wondering that the laptop is still ongoing and no more parts are damaged. In addition he s very cool that you could fix it yourself and dry. Many people don t know how ;)

  In any case, if the CPU is overheating it seems that something on the assembly or the cooling fan is damaged and must be replaced. Possibly peut t fan run with the highest speed more, who knows.

  Of course, it is difficult to say what is the cause of the problem, but in your case I would try ordering a new fan and the heatsink too. The two parties shouldn't t be expensive and it seems that you can replace yourself.
  So just contact a service provider allowed in your country to order these parts. They can do this.

  Good luck and feedback would be great, I am interested on this! :)

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• P7 - 1520t: PC does not start after a stop, but it will be after a reboot

  Since the last update March 1, my pc went all black screen and nothing happens, so I downgraded to its original condition with w8, with all fees have not kept what it is, I'm back on w10 and my problem remains the same, I can't start windows , not even with the recovery DVD or USB support. I have to remove all the power of my motherboard, so that I can boot and F1, I have install all the latest drivers available for all my components and remove all my material added always the same, if I restart without problems, but if I stop it when the CPU turns on, but windows will never load.

  Thank you in advance to those who can save me!

  P7 - 1520t - Intel i5-3330

  -16 GB of ram

  -64-bit W10

  -Integrated intel hd graphics

  H-Joshua-H61-Μatx (MB)

  I installed W8 if UEFI and everything worked well, have store 8.1 trough upgrade of windows, and I'm happy, all my stuff is working properly, is not going to install 10 tho... was good OS, but with all that is happening I will stay at 8.1, I put more money on fixing W10, they didn't even know what to do.