Satellite M40 - required Mat * a UJ - 831 part number S and how to remove it

Similar Questions

• Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

  Hello

  the next problem is sticky on the laptop Satellite M30X 165 with the burner Mat * a UJ - 831 S: it can read and write CDs, but is not able to write them to DVD or even read some of the ones I've burned and also read in the same drive. Even at the start of the DVD, it does not start from the recovery DVD, the player starts and slows down very quickly.
  Without doubt, it must be put at the service of repair or someone has other suggestions?

  Could you please tell me how long the repair takes (I know what it takes to install the desktop temporarily used).

  Thank you

  Post edited by: DerSeher
  Using burning software, it detects the DVD, but invite you to an "error of calibration power (037303).

  Hello

  If you cannot use recovery media, I guess that the drive is defective and must be replaced.

• Satellite L750 - can I change for Win 7 64 bit and how?

  New Satellite L750 preloaded with windows 7.

  In the Setup process asked to choose the 64-bit or 32-bit operating system.
  Chose 32 bit and I am having second thoughts.

  I notice the difference? I can't change to 64 bit and how?

  Thank you

  > In the configuration of the process asked to choose the 64-bit or 32-bit operating system.

  Start the recovery process once more!
  Turn on the device, press F8 and choose fix my computer.
  Then the new window will open and there you can choose HARD drive recovery.
  Usually we have to ask once more what version you want to use.

• Satellite M40-296: broadcast of TV-OUT - image is black and white

  My M40-296 with ATI Express 200 M doesn´t work well with TV-OUT. While the BIOS is set to Pal, and the software is configured for PAL-G (Portugal) the image is black and white. I ve tried two cables. A s-video/composite and s-video live.

  Can anyone help?

  Hello

  See this post:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=6310&MessageID=21884#21884

  Maybe this will help

• Satellite A300-1 MB card mother needed part number

  Can give it please for me the reference number of the Satellite A300-1 MB motherboard?.

  Thank you.

  I put t think anyone here will be able to help. Still is it that you need motherboard for model PSAG8E.

• Satellite M40 - FN key not working not not on XP

  Hello world.

  I have a Satellite M40 (which is M43 in Australia) model number: PSM43A - 1100H, running on an XP Home Edition.
  The FN key is works but doesn't work don't not with others (F6, F7, F8 for the brightness of the screen and wireless).

  I'd appreciate any help.
  Thanks in advance.

  See you soon
  JAX

  Hello

  I think you should visit the Web from Toshiba site and reinstall all the FN keys tools. Therefore, you must download and install Hotkey Utility and Toshiba common Modules, they should be accountable for the function FN key.
  You can download everything here: http://www.mytoshiba.com.au

  Check it!

• Satellite M40 - question on the BIOS update

  Hello

  I need to update my BIOS to be able to use a new stick of ram to 2 GB. Unfortunately I can't find an update of the specific BIOS on Toshiba website for the 265 M40, WXP with ATI graphics card.
  Which one should I install? M70, M100, 3.00, or 1.70, psm01, psm02...?

  Thank you

  Satellite M40 can grow up to 2 GB of RAM, and to do that you need BIOS update memory vivid but compatible modules.
  Toshiba recommended 2 PC2700 X 1024 MB (PA3313U-2M1G).

  What 2 GB module you want to use?

  That's all!

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye

• Satellite M40-256 - error starting by CD

  Hello

  a well known friend has Satellite M40-256, which Windows problem (error during the update and the manipulation of her children).

  It does not have an external Toshiba FDD or ODD. This laptop is also no built-in floppy drive. Buying one for that matter? NO.
  The boot priority has been changed: CD-network-HDD.

  I tried another Toshiba no ODD (in BIOS not mentioned/found) of brand
  The STRANGE original works/boots in another pc (via an adapter) very large.
  I tried several CD/DVD to boot from (error is displayed): moment-Linux such as knoppix, suse and other windows CD, recovery CD,... without success

  Each time the same result: the laptop has a black screen, the STRANGE is accelerating and after about 3 to 5 seconds, windows starts with the black progress bar.

  I also tried to press C to force startup from the CD.
  Some time previously, I had only access to windows in safe mode. But after uninstalling some updates, it ends with a license problem. This problem can be solved only by starting windows cd via cd.

  It has a bios Toshiba 1.00 (interesting, seems old enough).
  I'm trying at the moment to start the network. The Toshiba shows some messages regarding success/failure at startup via the network or a CD?

  Defined execution bit one influence on behavior?
  Does anyone know a solution to windows startup?

  Thanks in advance

  Check the instructions posted by Akuma.

  If it doesn t work I think that the CD/DVD drive is faulty and must be replaced. Contact the nearest ASP that you can find on the Toshiba site and ask for a replacement.
  It of important that you buy a disc that is compatible with the laptop but the ASP that will.

  Good luck!

• Satellite M40 startup / shutdown problems!

  For almost 3 months now, my Satellite M40 * don't power up * unless it is completely and absolutely * cold *. It freezes at the beginning.

  Every time I have shut down or restart my laptop, I have to wait about 25 minutes, so I can start it up again. What is happening is stops at the "* Toshiba" logo * screen, from the beginning and he * gel *. I have to press the power button until it turns the power off.

  It's a fact: the laptop is * NOT * extremely hot. Its temperatures are * regular *, I've been monitoring for some time now. If overheating is not the problem here.

  -It also won't stop; it freezes again in the * ' Windows is shutting down * ' display messages... and it freezes.

  -I know that another user of this forum who has had the same problem, but access to its wire has alleged that closed just because some have said of him/her to format and install the OS again. This is * NOT * a software problem! I have tried myself, for all its worth.

  -Today I have updated the * BIOS * also, it has not solved anything.

  So, knowing that I'm not the only one to have this kind of trouble with M40, what to do? Just buy a new one after 2 years?

  Hello Ricardo

  Let's be realistic. It is really possible that software is not the problem but tell me please what you can do in such situation. Not much. In another thread, the guy wrote quite reasonable notice. All you can do is make clean OS install and hope it helps.

  I agree with you that problem described is certainly hardware related issue but you can not do much and portable must be verified by the service. Using specific diagnostic tools, they can say with certainty what can be the problem.

  I don't really understand your last sentence. To be honest on this forum I have seen similar topics but unrelated to the M40 and it's really pointless to understand as untimely M40.

• Satellite M40: Mast * publishes a DVD Ram UJ - 831S

  model: Satellite M40
  Jon
  I had a problem reading dvd + rw (s) with this record, he had no problem with engraving (x 4), but it reads only 2 x. And once she destoyed a rw (there was more dark spots (like burned) on the media after, maybe the middle was very cold or what?).
  my current firmware is n/a (don't know how he know) and the question:
  1. where can I find the latest firmware? and is it useful?

  2. I recently noticed the becklight on screen is worse in the two lower corners (lower whole sections begins to be odd), is this normal by others or what?

  idkn

  Hi Jon

  I'll be honest to you. Satellite M40 is fairly new. Why you n t contact your local dealer or service partner and clarify these issues. The warranty is still valid, and perhaps the reader will be replaced. Here on the forum, you can wait for days for suggestions that will help you a lot.

  One of my friends has the same unit about a year now and it works very well. I liked laptop and I burn DVDs of film sometimes to his unit. So far, there is no problem with him.

  Good luck and thank you to a return if there is a serious hardware problem.

• PCMCIA.sys problem with Vista on Satellite M40 135

  Hello

  (Sorry for my English)
  I tried to install Windows Vista on my Satellite M40-135. (I added the 512 MB of RAM).

  But, like all users, I have the problem with pcmcia.sys. Vista starts successfully when I delete the pcmcia.sys file.
  But I have a problem: I have a PCMCIA TV and I could not use it without the pcmcia.sys file...

  So I was wondering if Toshiba will download the new drivers for Windows Vista... This laptop is 'Vista capable' according to Microsoft System requirements...

  Waiting for your help...

  Unfortunately, it seems that the snipe is right.
  Can the hardware specifications of this laptop allows you to install the Vista
  but it seems that Toshiba has decided to publish no Vista drivers for each series laptop.

  In order to check this document:
  http://support.toshiba-tro.de/KB0/TSB7201SK002HR01.htm

  Not seem that your laptop series is not part of the list

• Satellite M40-237 - cannot update programs

  Hello

  When I try to update the program to my laptop on my account in the Web from Toshiba site I have error and the message (path error: the page you are looking for does not exist).

  However, I bought new external Hard Drive WD (My Book Essential) and also I have problem with my computer while I contact the hard
  the next blue screen and I have to restart my computer.

  How can I communicate with my hard drive?

  Kind regards

  Satellite M40 - 237 part number: PSM40E-08E03EAR features - enjoy mobility high performance in an elegant design with Intel® Centrino mobile technology and the powerful Intel® Pentium® processor M
  -Windows® XP Home Edition unlocks the full potential of this device
  -Live the emotion of the 3D graphics and games of state-of-the-art thanks to the powerful chipset ATI MOBILITY RADEON® X 300 with up to 128 MB of video memory and support for Microsoft® DirectX® 9.0
  -Get the best multimedia mobile with looks a superb quality on Toshiba TruBrite (some models), 15.4 ", supported by the SRS® TruSurround XT technology and Harman Kardon® stereo speakers
  -Equipped with a button Express Media Player instant on access to CD/DVD playback without the need to start the Windows® operating system
  -Expansion is quick and easy with the permission of the bridge 6-in-1 Media slot, 3 USB ports, i.Link®, quick of new technologies of the ExpressCard and PC Card

  Hi majed_m_j,

  > When I try to update the program to my laptop on my account in the Web from Toshiba site
  To be honest I m a bit confused. Which account you average and where you try to download updates?

  On your external HARD drive: you get a blue screen, it's just?
  Well, have you tested the disk external DRIVE on another computer? If this is not the case, this!

• Satellite M40: BIOS update failure is covered by the warranty?

  Hello

  I own a satellite M40. I had some problem with it, and tried to update the bios to see if he could he solved.
  I flashed the bios with the windows-based utility, but the shutted of the computer down without any warning.

  Now the laptop comes on only 1 or 2 and then put off the coast.

  I bought this Toshiba, 10 months ago. So, is an update of the bios failed outside the warranty?

  Thank you

  Hello Stéphane

  We can discuss your problem here, but nobody can help you. You must contact the Service partner and clarify this point. Sorry but there is nothing that you can do it alone.

  Contact them, explain the situation and see how they will take care of this case.

  Good luck!

  Incidentally: If you require addresses, you can find everything you need under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

• Satellite M40 - I can't find the drivers

  I can't find any reference to the M40 model PSM43A - 11000H drivers on any website of Toshiba.

  The most appreciated assistance.

  Hi mate,

  It seems that you have a Satellite M40, you have a Satellite M43. Model number PSM43A - 11000H I can find on the Australian Toshiba page:
  http://www.MyToshiba.com.au > Support > downloads

  So search for Satellite M43 and then you can find all the drivers! :)