Satellite M40X-230: the display will not stay in position

Similar Questions

• Satellite M40x-230 - YouTube videos is not continuous

  Since the purchase of the satellite M40x-230 in 2005, he was never able to play online or off connection permanently in the video, the video stops to load a few seconds to a minute, about 10 to 20 seconds. In this case you were using itunes, windows media player or winamp.

  I downloaded the latest version of Adobe flash, but I'm not sure that there is an error with the laptop itself. The operating system has been reinstalled several times but the problem remains. I don't have this problem on a new netbook from toshiba.

  The information system are:
  Windows XP SP3 operating system,
  Intel (R) Pentium (R) M processor clocked at 1.86 GHz,
  512 MB of RAM.
  Graphics - unknown

  I would appreciate any information that might lead to a solution for this.

  Kind regards

  je6543

  Hello

  I put t know which videos you look, but perhaps that you have to install a new codec pack. Just use Google to find these codec packs.

  In addition, I recommend VLC media player. It s a freeware player that can play most audio and video files. It s freeware! :)

  Check this box!

• try to install GEFORCE GTX650 in my HP Pavilion p6 - 2413 has but the display will not illuminate.

  Try to install the GEFORCE GTX650 in my HP Pavilion p6 - 2413a, I plugged everything in and the fan seems to work but the display does not illuminate.

  There is another cable with 2 multi 1 6 end plug but I can't work out where to connect.

  I tried to find it on youtube but can't see where he's going to help me please.

  Hello

  You need a greater power to support a PCI-E power connector 6 pin. Try a Corsair CX500, or CX600. The image below is that of a NVIDIA GTX 650 which shows where to connect the PCI-E 6-pin connector to the graphics card.  Most of the HP PC which have a greater power or 460 watt have they support for the PCI-E power connector 6-pin.

  

• HP Office Jet 7612: lid will not stay in position trying to place a document on the scanning of glass plate.

  The top cover does not stay in place, trying to place a document on the scanning of glass plate.

  If not held with a hand he's going to slam closed.

  Y at - there a setting to make the lid to stay until my document is placed to be analyzed.

  I'm not placing books or strange shaped items on the plate scanning, only flat documents.

  If we're not careful the cover (which is heavy) will be slam down and hit someone's fingers or hand if not aware of this problem

  HP notified, they informed me that they would send me a replacement printer. The springs in the upper lid has failed or missing. Even if it took 2 phone calls and more than 2 hours on the phone, I guess it was worth it to get a replacement. It is due to the arrival on 12/14/15

• Playing a timeline, the class will not stay hidden - Bug

  Such things have already happened many times with EA, but I still found out how hand fix, rather than re - build. It's as if EA "catches a cold" or something on a technicality or another.

  Flow:

  Inside of a symbol, I want an element inside to turn using a toggle of the class.

  A class is assigned to with the small button [c]. Super.

  I write code in another scenario to control the class. Goes very well.

  I have the test button. Everything is good.

  Repeat for the other classes/buttons. All separate, without overlap. Everything is good.

  Click on another button that plays the symbol which also holds the element of class... bad. Class will be hidden or shown.

  -There are no references to the class to the other button. The only thing they have in common is that they - the class element is inside the timeline that controls the button.

  Each class untoggles to. Play the scenario where the class element SHOWS the element of class

  , I can't add this statement to stage/Creationcomplete: sym.$(".start").hide ();

  No effect. (Yes, I assigned the class to the elements)

  * If the State of origin was set to hide, I can use the corresponding button to show. Reading of the timeline, the item will to its original state. OR

  If the State of origin has been set to display, I can use the key to hide. Reading of the timeline, the item will to its original state.

  * Yes, I confirm that the second button has zero reference for the class in the code.

  
  

  What can I do? has something lost in the code? Splashes of code? Where can I clean it?  / THX!
  

  It seems that what follows is an IMPORTANT fact.

  If the element has no keyframe display whatever it may be, no matter what you do with the class, when the timeline moves, show/hide favorite status is returned to the keyframe on the timeline.

  Workaround solution. Delete keyframes. On creationComplete, hide the class. Do not try to create a baseline to hide (or show) the chronology.

• HP Pavilion ZV5000: mechanical problem laptop on my Pavilion - the screen when the lifting will not stay up by itself.

  When you lift the screen on my HP Pavilion ZV5000 laptop, is no longer stand on its own.  It used to be very tight and stand on its own.  I was wondering if there is a way to fix the clamp again.  I don't see any way to adapt it.  Need help!

  Mikie69

  Hi there @mikie69

  I understand that you are looking for a method adjust the laptop lid to be tighter. I'm happy to help you with this.

  As it is an older model, it is not very likely that spare parts are more readily available, but I still think you might find this operating manual.

  HP Pavilion zx5000 Notebook PC, HP Pavilion zv5000 PC notebook, Compaq Presario R3000 Notebook PC, HP Compaq nx9100 Notebook PC - Maintenance and Service of Guide

  Page 146 of 272 in the manual, you will find instructions on how to replace the entire screen. If you use that you can find a way to adjust the hinges to make what you need. Just be careful, because as I mentioned before, if something is broken, pieces will probably not an option, although, if necessary, you can try the parts store.

  HP Notebook PC - HP certified spare parts order

  I hope this helps.

• Want K203TX: Display will not wake up

  This is a new laptop.

  I did nothing about it, other than updates of Windows install and create recovery discs.

  • I put the option "turn off the display of" 1 Minute.
  • IMPORTANT: I put the brightness screen completely to zero, the lowest setting possible, by using the keys on the keyboard or the brightness option in Windows.
  • Let the laptop computer idle for a minute, the screen can accommodate as it should (the laptop is put to sleep after 30 minutes, only display that sleeps, the laptop is still awake).
  • Move the mouse, press the keys on the keyboard, the screen doesn't come back to the top. The computer is still in place and in the course of execution-i can switch keyboard backlight On / Off with the keys, but the display will not wake up.
  • Press on the "brightness +" button on the keyboard, the screen wakes up. It is the only way to wake up. The other option is to press on and hold the power button, force a stop down and restart the computer.
  • This occurs ONLY when "brightess" is set to the lowest level. If the brightness is set to again one level above the lowest, the issue cannot be reproduced. Move the mouse or press any keyboard will wake up the screen in this situation.
  • The two graphics Intel HD 5500 and GTX 850 M drivers are up to date.
  • BIOS is updated as well.
  • Battery / sector makes a difference. If the display brightness to the lowest, the screen will ALWAYS fail to wake up, regardless of which power source is being used.

  What should I do? Please don't tell me this is a minor problem and I have to live with it.

  There are so many problems minor with this laptop, and all these add make a total piece of cr...

  My almost 5 years probook with a second generation core i3 processor and no discrete GPU is better than this all-new 5th generation core i7 + laptop GeForce GTX.

  I'm starting to regret this purchase. I should have gotten another probook. Thought that offers want a better "bang for the buck", and now I think it was a huge mistake.

  Anyway, no idea how I can get this fixed? Looks like a right driver problem? Or is this a hardware problem? Can we with a trial of mobile Envy this out and tell me if the problem can be reproduced on their platform? It cannot be reproduced on my Probook.

  Thank you.

  Hi @johnwinchester,

  I'm so glad to hear you're solves the problems you had! The key is that you are now without a problem.

  To answer 2 questions;

  1. to my knowledge, if you purchased the HP 3 year extended warranty on the spot with a cover against accidental damage, then it usually starts from the date of purchase. Be sure and check out I would suggest either go this site check your product warranty and/or contact us.

  2. I'd say creating new recovery disks. The old drive will not help to you on your product. You have the ability to create new disks of recovery of the product without any reported problems. I wouldn't take the chance, I just came out with the old and turned to the future.

  I hope this has helped!

  Have a great day!

• Satellite M40x-230 - display driver lost

  Hi, I'm new here.

  I've had this laptop model Toshiba Satellite M40x-230 for about 4-5 years now. The hard drive is full so I thought I would like to remove some unwanted files. I did 2 things

  (1) uninstall some programs that I don't use anymore
  (2) use Disk Cleanup to delete unused files.
  I thought I knew exactly what I was remove, but when I did, I found that the display went bizarre.
  When I checked, I found that it was showing only a default driver. Worse still, when I went in the trash to try to undo what I had done, he has no files inside.
  I tried to do a system restore, but it does not work.

  I went on the site of Toshiba and sought the drivers for my laptop. There are 2 options. I downloaded all of them and tried to install. The first one (Intel) said my system did not meet the minimum requirements for installing the software. The other is (ATI) said the length of the specified directory path and the name of the installation folder exceeds 88 characters and to shorten it?

  Please can someone help me get my display back to how it was. It of usable but looks terrible and base.

  I know I'm a model so please be gentle with me.

  Hello

  Try this one:

  ATI

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080416165814.zip

  or
  Intel

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080416165832.zip

  I don't know if your laptop is equipped with Ati or Intel, that's why I posted 2 drivers.

  :)

• The user guide for a satellite M40X-230?

  Hello

  The screen must be replaced on my Toshiba Satellite M40X-230, and that I was looking for an online version (pdf) of the manual for it (as it's second hand so I do not have the documents to toshiba) I need basically mainly for an overview of how the screen of the laptop computer is equipped, I was wondering if anyone can link me to it if they know where abouts it is because I checked the site Web of Toshiba and my model is not listed when I just try to get it.

  Thank you!

  James

  You can download all the manuals here user:
  http://EU.computers.Toshiba-Europe.com-> download-> Toshiba operating manual & support

  See you soon

• Satellite Pro L450D - 12 X will not DISPLAY

  Battery is charged and good. The power adapter is good.

  The machine will not DISPLAY. The screen remains black and no beep. The power, & battery LEDS are green. The cooling fan is heard for a short time after you press the power button.

  I removed the RAM & HDD but the machine will show still not any sign of life (expect short noise from the CPU fan)

  I tried the no battery, no power, hold the power button for 30 seconds without success tour.

  I guess that the motherboard is dead. Has anyone else had the same symptoms? or can anyone suggest a repair?

  > I guess that the motherboard is dead. Has anyone else had the same symptoms? or can anyone suggest a repair?

  Indeed, it looks like a serious hardware problem possibly motherboard or maybe the CPU what to say to solve this problem, you must replace the parts and it will be a costly affair if the guarantee is not valid.

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• Every time I start up the Visual display will not.

  Original title: Aero

  every time I start up the Visual display will not.  I have to adjust from the start menu.

  I use a portable G6 pavilion. The screen is set at 1360 x 768 256 colors 60 hertz.
  He only did this recently.
  Any answers please.

  every time I start up the Visual display will not.

  Hello

  What exactly on your screen going bad?

  In the meantime try reinstalling the latest graphics drivers for the computer. Find them in the HP website.

• Reinstall Photoshop CS5.5 - on opening a file image, the program will not display the image.

  Just reinstall Photoshop CS5.5 of CD on Mac. On the opening of an image file, the program will not display the image. Thumbnails of the image appear in the layers window, but not the main window - ideas?

  Join the Discussion of Photoshop discussion

• my logo will not stay in the corner

  In the Loo Loo model will not stay my logo in the upper left corner.  When it is in the design phase, it is there, but when I saw it, he puts it as close to the middle in the middle of my background image.  Any advice?

  Hello

  Please make sure that logo is pinned at the top of the page to the left as shown in the screenshot below.

  

  Concerning

  Vivek

• How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  How can I get a google font (Capriola) in Muse. I pasted the code in the head of html, but the police will not be displayed. Can anyone help with teamviewer?

  This is kind of a hack, but it will work.

  1. you will need to download a copy of the Capriola on your computer and install it as a system font. Google Fonts will allow you to install it as a system font in some methods (download a.) (ZIP file, synchronization with SkyFonts or downloadable on the project in Google Code). Edit: the simplest is to add the font to your collection of fonts in Google and then download one. ZIP file of your font collection.

  2. the font squirrel website has a generator of quality web fonts. It may take a font installed on your computer system and generate all the files of web fonts needed him. Place the web font files in the folder of your Muse project where you want to store the web fonts self-hosted. Use the add web fonts in Muse and select the tab fonts self-hosted.

  IMPORTANT: Please read the license terms for any font that you want to use on your website. Fonts Open source as Capriola may seem safe to use at first, but the developer of fonts may have some requirements, such as the display of a link to their web site somewhere in your own site. Other fonts may have monthly limit on number of pages seen.