Satellite M50 of power not recognized

Similar Questions

• Satellite A200 - hard drive not recognized

  Hello. Deploy a satellite A200.

  Original problem would not initialize only power light and hard drive light came on a second, nothing on the screen, not access to the parameters of F2. Reinstall memory, no go, deleted the test and drive hard and read disc hard ok in an external enclosure. With disk hard deleted computer will start after market boot disk and running program diagnosis ok. Can now access the settings of F2.

  Format external hard drive, reinstall and start with the startup disk, hard disk appears in the bios, the test runs diagnostic ok.
  Tried to install Windows XP and XP pro and windows twice starts to install and then comes up with an error saying there is no hard drive present, even if the Bios and a diagnostic boot disk at the same time recognize the hard drive.
  Tried another hard drive with the same problem, not recognized.

  Any ideas?

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Normally with this record everything should work fine because it s pre-tested and specifically designed for your laptop.
  Check this box!

  In the worst cases, your HARD drive is faulty and you need a new. The HARD drive seems to have random failures.

• Satellite M70: HARD drive not recognized external - various XP error messages

  Hi all

  I have a Satellite M70 and I have a Western Digital external hard drive.
  Initially, it worked great, I was able to put my large collection of music, etc. on it and run a computer off to save space on my integrated HD.

  But recently I had problems with XP not recognizing HD or be able to write in it. It appears in my computer, then disappear, often randomly when I write new files to it.
  I reformatted the hard drive to NTFS as it ran originally as FAT32.

  I updated my BIOS as well, but I'm out of ideas.

  Anyone else had similar problems with XP?

  Thank you

  Will be

  Have you thought about external HARD drive failure?
  Perhaps failure of HARD drive and, therefore, it cannot be recognized correctly.

• Satellite M50 suddenly does not work

  I wonder if anyone can help?
  My Satellite M50 seems to have a number of very important issues:

  On booting, I hear a note very acute and rather than go automatically in Windows XP, I gives me a choice of F2 (Set Up) or F12 (Menu I think it is called). If I hit the button enter the noise goes and go into Windows XP as usual.

  However, I can't sound on the Satellite, either from a CD or a DVD inserted or a live video or
  audio clip. I checked the control panel and audio is not muted.

  Also, my 'e' character on the laptop does not register (press and no character comes on screen - I have to fix a new keyboard to the laptop to use the letter "e") BUT in Excel or when I put in a URL, I often get a complete line after the rank of the character "e" (without warning) that stops if I press the button "Esc".

  I don't know if I was infected by a virus (I have Avira AntiVir Personal) & Malaware programs on the laptop, but I would be grateful for any help on this problem.

  See you soon!

  Bryan

  Hello

  I think it s a keyboard problem.
  The sound that appears at the beginning of the startup procedure means that a hardware failure has been detected.
  In my opinion it s related to the keyboard, since you have no keyboard under Windows OS functionality.
  So I would get in touch with ASP in your country and to order a new keyboard for the replacement.

  Regarding the sound issue.
  I don't know what that might be, but actually the first step should be an update of the driver or a new installation.
  Check if there is no yellow/reclamation brand that reffers to the sound card!

  See you soon

• Satellite M50: Windows did not start because of a corrupted system file

  Hi all.

  I have a problem with my laptop Satellite M50. When you turn on the laptop, a message appears: "Windows did not start because the following file is missing or corrupt: \windows\system32\config\system»

  I am aware of my product recovery CD-Rom and have inserted - however, I don't want to reformat my HARD drive as I have files I back (foolishly) not upward.

  Is there another method to repair the corrupted file without having to wipe all files on the HARD drive? (I don't have an XP CD - the operating system is loaded OEM when the laptop was purchased)

  Thank you very much!

  Hello

  Hmm, using the repair console could be a good way to copy or replace the damaged or missing files on the HARD drive.
  BUT you need to start the console of Windows XP CD of original Startup Repair.
  Without this CD, you will not be able to repair the operating system. The Toshiba Recovery CD contains only image files and does not start the repair console.

  Now the question is; How to back up data.
  You can remove the HARD drive and connect it to the PC second via the external USB HARD disk controller.
  Then you should be able to copy important files on the second computer.
  After backup files you can start the installation from the recovery CD.

  Good luck

• Satellite U400-119 - battery not recognized

  Hello

  I just bought a laptop TOSHIBA Satellite U400-119. The operating system is Windows Vista Home basic.
  Before I turned on the laptop, I plugged on the CC adapter and let the batteries reload for 24 hours.

  However, after 24 hours, battery LED icon is orange and blinks (which means that the battery is low according to the user manual).
  When I tried to turn on the laptop without the adapter DC laptop computer did not respond. So I installed Vista while the laptop was still connected to the DC adapter.

  After installation, the Vista battery icon displays a red cross on the battery icon, which means that it is not recognized.
  This is a brand new laptop so I think the battery needs to be replaced, but I don't know.

  Someone at - it had a similar problem?
  Any sollutions to my problem?

  Thanks in advance!

  A display really interesting because one of my friends got the laptop U400 and a similar one issued what s happened too.
  Suddenly, the battery did not recognize I thought that it s a malfunction of the battery. But I was wrong.

  The solution is very easy.
  You must update the BIOS and this should help get rid you of this strange issue.
  My friend did the same thing and it worked!

  So check it out. Download the BIOS compatible and right and update!

  Good bye

• Satellite A355-S6925 - SDHC not recognized

  My Toshiba Satellite A355-S6925 does not recognize a Lexar Platinum II 32 GB SDHC card class 4.

  My last hard drive crashed and I replaced with a new one and installed Windows 7 from scratch.

  Am I missing a driver or firmware to use the built in reader SDHC?

  Please help, I just bought a camcorder and I want to transfer video.

  Hi michael_fuglas,

  > My Toshiba Satellite A355-S6925 does not recognize a Lexar Platinum II 32 GB SDHC card class 4.
  Hmm, I think that the card isn't recognized due the high capacity of 32 GB. As much I know 32 GB cards are not supported for all card readers

  In your case, I would try a smaller size such as 4 GB or 8 GB. Generally these cards should always work.

  Check this box!

• Satellite M50 182 does not start

  Hello

  I have a Satellite M50-182.
  Since a few days I m faced a strange problem on my laptop.

  When I press the power button, it turns to blue light, as usual, I hear the fan for 2 seconds and after that the system stops immediately (I put t get any screen) and turns off.

  First I thought it might be a contact isolate but the same thing happens in battery mode. After several tests the system is in place, but it can take up to 5 minutes by pressing the power button.

  Y at - it an idea, that can cause this problem?
  Kind regards
  Philippe

  Hello!

  Try to remove the battery and unplug the AC adapter.
  Wait at least 30-40 minutes.
  Then connect the battery or the AC/DC adapter and try again.

  Otherwise, I'd go to a local ASP. I think that there is something wrong with the hardware (I think that CPU or the motherboard).

  Good bye

• Satellite A60 - replacement HD not recognized in the BIOS

  I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.

  I suspected that the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.

  The recovery CD installs saying there no drive selected.

  Can anyone offer any help or advice on what I can try next?

  Here are some technical details.

  Laptop Toshiba A60-672
  old MK4025GAS (40gig) drive
  spare MK4026GAT (40gig) drive

  Thank you
  Phil

  > I have an A60 which began to shut down and not start.
  I tried to use the restore CD that has reinstalled the operating system, but the laptop still not managed to start after that.
  For me, it looks more like an overheating problem caused by the internal temperature.
  It is a typical problem if the cooling fans are clogged and that air can circulate properly.

  > I thought the HD failed and bought a toshiba 40gig drive replacement. I have installed the new drive but and been in the BIOS (F2 and F1), but the BIOS indicates there is no HD installed.
  One of my friends has updated the own Satellite with the new HARD drive and the HARD drive was not recognized by the BIOS due to the assignment of the PIN wrong and riders Check this!

• Satellite A10 - recovery disk not recognized

  I want to format my hard drive and reinstall windows xp.

  Of course, I have Toshiba A10 laptop with HDD 160g, 1 g of Ram, cd/dvd player and the restore disc (cd).

  Problem: the restore disc is not recognized by the cd player. When I insert the disc, then again, boot sequence goes to hard drive and boots from there

  What I did:
  1. check if the reader sees another s cd. Answer Yes, Yes
  2 boot sequence of the bios checked as well as toshiba consoles set up made sure it is
  in "order"hdd, lan, floppy, cdrom", (I tried other combinations starting with cd as well).
  3. I cleaned the restore disc, didn't work
  4. I ordered another set of Toshiba restore disk, which did not work either, still not recognized
  5. I bought a cd/dvd external reader believe it or not, disc starts to work in this case, I get a warning screen shows all data will be lost and asks me to click if I want to continue, when I click it says will now restart the computer and it does but comes back and goes back on the hard drive and boots from there.

  I must also add; When I switch on I get "' pxe e61 media test failure, mof outgoing intel boot agt" msg, according to my search, this problem indicates hard disk.
  but my hard drive does not work,

  Will someone give me an advice?

  If the BIOS is set to boot from the local network first, before trying to boot from the HARD drive, you will see the error PXE.

  Have you tried to clean the lens in the DVD player? Wipe with a Microfiber cloth.

  try holding down "C" when you turn on the laptop, this will make it boot from the CD.

• Re: Satellite L500 - HARD drive not recognized in BIOS

  Hi guys,.

  Yesterday, my mother-in-law has been using his computer and play some games. The computer froze and I had to force a shutdown. Upon restart, the computer continued to give the following message is displayed:
  PXE - E61: Media control failure, control cable (or something similar)

  I removed the HARD drive and replaced him, with no avail. I checked the BIOS, and the disc HARD is still not save in there, so not sure the hell happened.

  Anyone has any ideas on this? I'm looking at a new HARD drive otherwise.

  See you soon,.

  Nathan.

  Hey,.

  If the HARD drive is not recognized in the BIOS more I think that it s faulty and you need a new. This is the reason why you get up a PXE boot message initially.

  Is your laptop still under warranty? Then you can get a new HDD to an authorized service provider for free.
  Otherwise, you can buy yourself but it s not expensive. You can use each interface SATA 2.5 HARD drive.

• Satellite M50: Fn + F5 not switch views

  Hi all
  I have a laptop Toshiba Satellite M50. Recently, I connected a projector to my laptop to do a presentation. After connecting the cable, when I pressed Fn + F5, I see 3 options: laptop, laptop/external, external computer. I tried to select portable/external or external computer but the screen revealed nothing. Nevertheless, I rebooted my laptop with everything always connected. During the restart, as shown by the windows loading and Toshiba screens, projector shows exactly what on the screen! However, when Windows has finished loading, the spotlight returned to No Signal.

  I dug through the forums and it seems that my laptop can detect the external connection, but cannot display on the projector. Could someone help me with this? I'd appreciate some advice. Thank you!

  Garet

  Hello

  Go into the display properties and go to the advanced settings.
  Check tab displays the external device (beamer) is enabled.

  Also, I read that if you want to see the videos on two display devices, you need to disable hardware overlay (there must be a controller).

• Satellite L30: Usb device not recognized

  I have a problem with my laptop L30.
  When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
  Tried to reinstall windows did not help...

  is there a solution?

  Hello

  Hmm. First of all, you should unplug all external USB devices.
  Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
  Reboot the laptop.

  After this procedure, the operating system should recognize and should install new ports.
  Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
  Usually these drivers are provided with the USB device.

  I would recommend this review if necessary!

• Satellite Z830-10U power not on

  Greetings;

  I connected my Satellite Z830-10U in power and left it running for half an hour and then I saw him as Eve extended (screen off). Then it was left for 20 hours of yesterday, plugged into the power outlet... There now
  its 'DC in' orange indicator flashing, power indicator light is green regularly, that the eco indicator is also on and green. The screen is off, and it's like the shutdown of the system.

  The problem is that the power botton is not working and pressing (whether for a short or long period) has no
  effect. I plug the AC power adapter when you are connected to the computer and I see that the battery indicator is
  Green and stays until I have unplug the adapter from socket or unplug charger from
  computer.

  How can I turn it on and get my files back?

  Thanks in advance.
  Mr. shams

  > How to start and recover my files?
  Well, the files are on the HARD drive
  So you can remove the laptop HARD drive and you can use an external USB to SATA controller /enclosure in order to connect the HARD drive to a different computer.
  It would be the best way to get access to files

  The other story is the feature of laptop power
  To me it seems that his question in such cases and related equipment the unit needs are checked by technician I hope that this is not a motherboard because in this case you must replace the mobo and it could be a costly affair

  Guarantee is valid?

• Satellite P200 - Cdrom is not recognized

  Hello

  I have a satellite p200 and my cd rom is no longer recognized by my laptop. I had this problem once before and brought back to pc world who fixed it, but don't know why.

  Someone had the same problem? Anyone know of a solution?

  Before you contact the technicians for the control of the laptop try to boot from a CD. For example, try to install the OS from the Toshiba Recovery CD.

  If it be possible, then the CD/DVD drive is correct and not in default. In this case, I think the problem might be related to software and new installation OS should fix.

  From my personal experience of the damaged windows registry could be responsible for these problems of CD/DVD drive.

  Good bye