Satellite M70-350: wireless and firmware update

Similar Questions

• Satellite M70-350 - Win 7 drivers needed

  Hello

  I installed Windows 7 on my Toshiba Satellite M70-350, and yet I am facing problems with the drivers.
  Can someone guide me to the correct drivers for windows 7 32 bit?

  Hi mate

  Satellite M70 is not Win 7 supported.
  This means that the Win 7 drivers are not available for Satellite M70 series.
  You can find the Vista and Win XP drivers for the M70.

  But don t worry not about this. Some vista drivers are compatible with Win 7 and can be installed also.
  In addition, you can see the drivers Win 7 that are released for other laptops Satellite
  For example, Satellite L500 or another series

  Touchpad WLan drivers drivers, drivers of LAN, Bluetooth, utility Support Flash Cards and Sound Driver are not the specific series notebook.
  So, you can use it on the laptop with the same material.

• Satellite M70-350 - 633 Mhz DDR2 Ram work?

  I have a Satellite M70-350 and on that I have 512 Mo DDR2-533 (266 Mhz)
  I know I can go 2Gb maximum.

  My question; If I put on my Lalonde DDR2-633, it will work or not?

  I think that you could use, but the module will not work with full 667 Mhz, because the FSB is limited to 400 Mhz.

  That is why it is foolish to buy a 667 Mhz module, if the laptop it will use only with 400 Mhz max.

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• Satellite M70-173: wireless connection is not working properly

  Hello

  I am a novice and need help with Wi - Fi. I have laptop Satellite M70-173. My desktop pc is connected to the Netgear MR814v3
  802 11b cable/DSL with wireless router. I have connected the router to my broadband (telewest) and have access to the internet on my desktop pc. I turned on the connection Wireless via the menu of the router (the lights is on the router it's transmission). My wireless laptop is switiched on, BUT when I use windows on the laptop to get a wireless connection, nothing is detected. The laptop is 50 cm from the router. I tried and did the following:

  Firmware update,
  Made sure the SSID is the same on the router and the laptop.
  Wireless on laptop mode is on infrastructure,
  Wireless access point is enabled.
  List of access on the router is enabled,
  No encryption is used until I have run

  Any ideas any help?

  Thank you

  Hello

  Have you activated the wireless antenna?
  Please check if the switch wireless on the side of the unit is on. Also check if the wireless is turned on with the FN + F8 key combination

  Please check this possibility

  Concerning

• Satellite M70 - screen flickers and goes black, white or other

  I have a portable Satellite M70 and lately the screen becomes either black, white and a few other colors (no ghost image).

  The laptop seems good but I can t see anything so the only solution is to turn on and off. He didn't used to do this.
  I have updated the BIOS and the driver of the screen but always comes back.

  Any suggestions?

  Have you tried an external monitor on the laptop?
  It would be important to make sure if it s a display or the motherboard problem.
  Check it!

  Have what driver you installed for the laptop? You must use the driver from the Web from Toshiba site.

  Good luck!

• N300 WIRELESS ROUTER FIRMWARE UPDATE E-MAIL HOAX?

  I just got the am hesitant to click on one of the links, wary that this could be a scam email below. My main reason being that he says they are trying to fix a problem of firmware critical but the "firmware" is misspelled where the link is on the installation instructions, that is, "actual." I don't want to download anything that may harm my computer, and you will pay Netgear technical support by phone.

  Thank you. -Lisa

  N300 Router Firmware update

  Dear customer, Us comes new firmware for the wireless N300 router (WNR2000v4) a critical problem indicated by the power being continuously lit LED amber. We recommend that you only install the update now. This Web site was updated (v.58 or higher): http://support.NETGEAR.com/product/WNR2000v4 Actual installation instructions: http://kb.netgear.com/app/answers/detail/a_id/23442 Learn more about the problem solved here: http://KB.NETGEAR.com/app/answers/detail/A_ID/27477 Thank you The NETGEAR team

  I received the same mail only a few minutes ago and click on the Web to verify its content, which is how I found this thread.

  Then I searched the Netgear site and found this page which describes how to enter the Web page of your router and check for any firmware (or the actual, since even business communications with typos sometimes escape in nature) updates for the router:

  Page Title: Install the latest firmware on a NETGEAR router

  URL: http://kb.netgear.com/app/answers/detail/a_id/23442

  --

  MK

• DeskJet 3510 questions - wireless and Firmware

  CZ044A printer Deskjet 3510.  8 64-bit Windows. Used the downloaded software install Version 28.8.

  Can connect without wireless or USB with no problems.

  1. impossible to install the HP firmware update recommended.  Tried different downloads, etc. but each program runs, the "Problem detected" screen appears and stops the installation.  He tells me to correct the problem, and then try again.  There is no problem I can find.

  2. whenever I restart the computer, the printer without wireless or USB connection is lost.  The icon becomes "gray" devices & Printers.  I tried diagnoses of HP who finds lost communication.  I have remove the device and then reinstall the printer and all is well again until I restart.  This happens with the wireless connection as USB.  In wireless mode, the printer is connected to my router, or if the display shows.

  Thanks for any help you can offer.

  Chuck

  Hi Chuck,

  Make sure the printer connected to your network and try to update the firmware by using the front panel of the printer:

  http://support.HP.com/us-en/document/c03368026

  Shlomi

• Satellite M70 - 181 - slider and escape key does not

  FN with F10 keys shows no reaction.
  Check all the drivers.
  But cursor and escape keys does not.
  Need help please

  Joe

  As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

  Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

  I had M70 long ago, but I've never used this option.

• Satellite M70 - 170 - Touch and the launch does not work

  Hello everyone, I'm Sylvain and I'm french, so sorry for my English...

  I have a Toshiba Satellite M70-170, and I have a problem with the program "Hit and run" (1,2,9,0)

  I see the icon then the clock and I can change the settings, but when I press the button of the mouse will work, but not to the touch and launch...

  Can you explain why?

  I love this commercial and I want to know why it does not work.

  I put t know why the touch & launch does not work, but I would try to reinstall again.
  The Touch & launch is placed on the European driver Toshiba page.
  This time it s a v 1.2.9.0 for Win XP.

  Uninstall first touch & launch and after restarting again install it again!

• On Satellite M70 low wireless signal

  I have a satellite m70. It worked very well with the excellent signal until yesterday.

  now, the signal dropped to very low levels. my wireless router is working fine (I checked with a friend)
  is my wireless card faulty? How will I know?

  Help, please...

  Hello

  This happens to you just on the mode of feeding with AC adapter or battery too? In any case has the power management of the WLAN card also at the highest level.

• Sansa view 8 GB and firmware update

  HI I am a newbie so sorry if this has been posted before, I used my sansa view 8 gb mp3 and added lots of music, he loved, in any case now I decided to download the firmware update when I made it to my pc with windows 7, my mp3 player has been assigned to the pc, carefully he showed everything on battery strength m of free space etc. Once I had downloaded the firmware, computer recognizes only removable disk size 15.9 MB and sansa view shows on the display no valid g7object image loading failed when bootin mini b device mode

  I had to order a new sansa view 16 GB mp3 player but at the very least, I would like to recover my music and would be very happy if I could get the MP3 itself can someone please help an absolute fool, think that it was my fault because it was perfectly ok before thanks a lot

  Try the following manual not not (MSC mode) the firmware in this postinstallation instructions. Do not download and use the Sansa Updater (even if the receommends post at). Also be sure to download the correct .zip file (the one labeled A if you are in America) and unzip or extract to somewhere easy to find (like your desktop).

  This should guide you through it easily.

• Add new Member and firmware update

  Hello

  I have a group of 4 bays Equallogic

  1xPS4000 (Type: 70-0120) and

  3xPS6100 (Type: 70-0400)

  They all firmware v6.0.4

  The new table is a PS6210XV. I'm sure that the firmware of it's newer probably with a release v7.x.

  The documentation for the firmware update, it says that I have to upgrade all the tables on my group first, and then add the new group.

  I was hoping to add the new table and move some of the volumes to that one, update a table that I emptied, add back to the pool, empty one another etc etc.

  Is this possible?

  It is really not a good idea to do so.   In place upgrade is by far the best option.  If you have defined your timeout of 60 seconds and choose a period of quierter I/O, that there should be no problem.  Also, be ready for an upgrade means that be ablel to handle a failure of the controller in the case of a real problem of HW.

  First, if.  You need TO upgrade the new Member and all members of 6.0.x to 7.0.9.   The new table will come with 7.0.x since it is the minimum version for this controller.  Upgrade to 7.0.9 as well.  Create a new pool for this member and do not set the RAID policy yet.  Do not enable the iSCSI 2nd course interface.

  What disks you have in the existing tables?

  You run VMware ESXi?

• BIOS and Firmware update

  Am I wrong in assuming that no firmware and BIOS updates are needed for my blade servers as part of the ESX updates?

  Mike

  You are wrong to assume that. You should always apply BIOS and updates the firmware for your hardware.

• Satellite C660-13R - wireless and Ethernet are not working after format

  Hello

  I just formatted my laptop and I only get the Internet connection with a wireless usb antenna...

  Ethernet, or wireless appear to work. Before the format, that it worked fine.

  Here is the product

  http://www.Toshiba.co.UK/discontinued-products/satellite-C660-13R/

  Please help with a solution...
  Should I consider the adapter's death and stop trying?

  Hello

  I m wondering if you already installed the driver LAN and WLan essential?
  Did you?

  What is the status of LAN and WLan card in Device Manager?

  Your laptop was equipped with a Realtek RTL8188CE WLan card and the Ethernet LAN Realtek 10/100 Base module.

  All the essential drivers for the Satellite C660 PSC0LE found on the page of the Toshiba UE driver