Sansa view 8 GB and firmware update

Similar Questions

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• Sansa Fuze - insufficient volume after firmware update

  After the latest firmware update to its maximum volume looks like a whisper. And the configuration of the System Volume option disappeared! Thought that this setting is set to Normal and should change at the top. But the Volume option no longer exists. I use the same set of headphones. Any ideas? Can I go back to the previous firmware? or should I get another MP3 player? Whenever I update the firmware, I have all sorts of problems! All the presets radio disappear as well! But the problem of volume is the most boring... Thank you all in advance.

  Why throw the baby out with the bath water?  Let build .31 on the device and set your locale.  Choose reset to factory settings, choose in North America and your preferred language.  For Europe, you will need to do is choose "rest" for your steps of FM frequencies.

  Note: You can leave the current version of the firmware installed on the device (build current est.31 ou.33 according to the revision of your device).  Once you select 'Yes' for the mask to reset factory settings, the unit will ask you your desired area.  For the EMEA region, do not forget to go to settings > Options Radio > region and select Europe for the stages of EU frequeqncy.

  I just wanted you to save a lot of hassle!  Your volume option will be available again.

  With regard to the volume, please use good judgment when you listen to your music.  Keep the volume at a reasonable level, because your audience in the long term is much more valuable than a little loud music.  If the device is for the kids, well, as a dad, I know how they are.  Perhaps the limited volume can be useful for once.  You can blame on the EU regulations.

  Bob

• Sansa View 8 GB and Windows Vista 64-bit

  I have a Sansa View and was thinking about making a new laptop with Windows Vista 64-bit.  I searched on the web as see if it is compatible, but have not been very successful.  Is there anyone out there with a view running a 64-bit or have any knowledge on that? Thank you!

  Yes, it is compatible. 98% of the software and hardware produced in 4-5 years are compatible with Vista 64 bit.

• Add new Member and firmware update

  Hello

  I have a group of 4 bays Equallogic

  1xPS4000 (Type: 70-0120) and

  3xPS6100 (Type: 70-0400)

  They all firmware v6.0.4

  The new table is a PS6210XV. I'm sure that the firmware of it's newer probably with a release v7.x.

  The documentation for the firmware update, it says that I have to upgrade all the tables on my group first, and then add the new group.

  I was hoping to add the new table and move some of the volumes to that one, update a table that I emptied, add back to the pool, empty one another etc etc.

  Is this possible?

  It is really not a good idea to do so.   In place upgrade is by far the best option.  If you have defined your timeout of 60 seconds and choose a period of quierter I/O, that there should be no problem.  Also, be ready for an upgrade means that be ablel to handle a failure of the controller in the case of a real problem of HW.

  First, if.  You need TO upgrade the new Member and all members of 6.0.x to 7.0.9.   The new table will come with 7.0.x since it is the minimum version for this controller.  Upgrade to 7.0.9 as well.  Create a new pool for this member and do not set the RAID policy yet.  Do not enable the iSCSI 2nd course interface.

  What disks you have in the existing tables?

  You run VMware ESXi?

• BIOS and Firmware update

  Am I wrong in assuming that no firmware and BIOS updates are needed for my blade servers as part of the ESX updates?

  Mike

  You are wrong to assume that. You should always apply BIOS and updates the firmware for your hardware.

• HP Envy 114 and Firmware update

  Hi all

  I just got my 114 desire and it was very easy to install, it works.

  Everything works great and it connects to the internet (wifi) very well.

  The only problem I have is when I try to check the update of the firmware through the screen touchscreen printer I got the following error message (there is an English translation of Italian language):

  No link available. The printer is not connected to the network.

  It's strange, because the printer is actually connected to the Internet and I can use ePrint, eFax etc... no problem

  Any idea?

  Thank you!!

  I solved it in the meantime.

  From the front panel of the printer, I erased all the web settings and services.

  Then I ran the installer again... and this time I can check the update without problem.

  Thanks for the help!

  See you soon

• SG200 bootloader and firmware, update command

  I know how to use tftp to update the device, but I was wondering if there is a particular order I must follow.  For example, can I download boot _and_ fw in a single session and restart the switch?  Or if I might just start code only, reload the switch, then firmware?  Is how important it?  I have two switches with the following specifications

  SwitchA: V01 SG200-50 1.0.0.1/1.0.0.19

  SwitchB: V02 SG200-50 1.1.0.6/1.1.1.8

  I would like to take them both at 1.3.5.06/1.3.7.18

  Thank you

  Diego

  Hello Diego,.

  I recommend to download the firmware and boot code and then reboot once.  I did all three ways, but the best way would be to download both and then restart the switch once.

  Just keep in mind the switch take longer then usual for the first time, once you upgrade boot code because it makes changes to the system startup files.  On the SG300 or higher, you can watch this process with a console cable, but given that the 200 do not have console access you will have to just wait.

  It may take up to 5-10 minutes for the first start, I always say whenever he feels like it's been too long, wait a few minutes and then it will be operational.

  Oh and in case that you're wondering there is no problem go directly to the latest firmware, there is no need to step up.  However, I would recommend defaulting and manually reconfigure switches, once you upgrade the.  Because there was some change you will be better off with a new configuration based on the new firmware.  It is not always necessary, but if you have any problems once you upgrade it would be the first thing that we would have you to do if you called support.

  Hope that helps and thanks for using Cisco,

  Christopher Ebert - Advanced Network Support Engineer

  Cisco Small Business Support Center

  * Please note the useful messages *.

• Satellite M70-350: wireless and firmware update

  Hello

  just bought a Toshiba laptop when I want to use wireless internet, I wasn't able to connect to the router.
  After calling the helpdesk, I added the IP address and DNS server, but sometimes internet still doesn't. work of t. Helpdesk I have says to upgrade the firmware, someone knows where to download the latest firmware upgrade?

  Hello

  Do you mean the firmware on the router?
  Usually the firmware on the router you will get from the router manufacturers.
  WLan card driver will get you on the Toshiba driver page or also form card WLan manufacturers.

• LaserJet Pro CM1415fnw and firmware update

  After installing the new firmware from LaserJet Pro CM1415fnw (series CM1410), I found new in Control Panel in Service. In the signature verification, I put the bad Cancel value, but in the RFU (upgrading firmware remotely) there is ignition values and closed and locked. What is the difference between 'Off' and 'closed and locked? Which should I choose?

  I guess these new items are corrections regarding the vulnerability of the firmware upgrade was informed late last year?

  In this case, well done.

  I asked one of our expert engineers FW and the response has been

  "Withdrawal and means locked, it will not accept RFUs and the only way to change that works again via the control panel.  You cannot use SNMP to do.  If you have just off then someone can come and still change it via SNMP.  SNMP is a Standard Internet Protocol for the management of devices on IP networks. »

• r7800 next engineering and firmware update

  I have a netgear 7500 and the new 7800xs. Currently, the network card and the remote control on my android guard failed. When is the next firmwater coming out?

  They can be manually changed to match.

• Firmware update and the playback Volume

  Help!

  I just did an update of the firmware on my Sansa Fuze and I can't hear it more!

  Does anyone know how 'Cancel' the update of the firmware, please?

  Have you seen this thread?

  http://forums.SanDisk.com/T5/fuze/Sansa-fuze-insufficient-volume-after-firmware-update/m-p/139809#M3...

• Is available for Equium P200-1ED optical drive firmware update?

  Y at - it upgrade for the HL-DT-ST DVDRAM GSA-T20N because I can't find as of ve and tried the 3 that appears for this model, but it bad and I need to update to the last.

  Any help with this would be great thank you.
  Dale

  I checked the manuals s and found a list of all optical disk drives compatible.
  Of course, the STRANGE in your laptop is not affected with severe dysfunction and firmware update is not necessary and also not available for download.

  Have you noticed a serious problem?
  Is there a reason for the firmware update?

• Sansa Clip freezes at startup and on the firmware update

  After unplugging my video to my computer, it is hung on the screen "Connected".

  I forced a reset by pressing the power switch it 10 seconds

  He then restarted and hung on the Sansa screen

  I followed the instructions given in these forums in order to download the update of the firmware, mount the Clip in MSC mode and install the firmware.  Unplug the Clip, it hangs at "Update Firmware in progress" screen.

  I then re-mounted the Clip in MSC mode and deleted all the files of music and the update of the firmware.  After disconnection, he hooked again on the Sansa screen.  I then mounted in MSC mode and re-installed the update of the firmware.  He is now suspended again at the screen to update the firmware.

  Any suggestions would be greatly appreciated!

  The following procedure restored the Clip, but requires access to a Windows operating system:

  1. Tower Mounting Clip in MSC mode off camera (now switch is in position 10 sec If necessary 'on'). Set the switch to position 'Hold '. While pressing the "Select" Center, plug it into the USB port on a Windows computer. Wait for Windows to recognize the device before you release the "Select" button

  2. format of the Clip Double click on 'My Computer' to open a window of the Explorer. You should now see the video listed as a reader. Right click on the video player icon and select "Format". Select "FAT32". Do not check the box "quick format". Format the drive.

  3. Finish you can now disconnect the Clip of the computer and it should behave as a Clip of the new out-of-the-box. If you wish, you can download Sansa Updater software from the web site of Sansa (Sansa > support > Clip > downloadsansa Firmware Updater) and run it to install the latest version of the firmware on your device.

• Sansa Firmware Updater fails to install every time...

  I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...

  I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.

  Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).

  Any help would be appreciated. Thank you.

  SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).