HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

Similar Questions

• I have a HP Pavilion Elite m9060n desktop PC and want to have two monitors.

  1. I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in dos I/O ports there is a VGA slot but there is a black top, lid that States do not remove.  This means that the port is not available?
  2. I have also a port HDMI as part of The NVIDIA GeForce 8500 GT can I use that and the DVI port on the NVIDIA GeForce 8500 GT to have two monitors?
  3. Can I use a DVI splitter with DVI-d port on the NVIDIA GeForce 8500 GT to have two monitors?

  NVIDIA GeForce 8500 GT

  

  

  1.I have a HP Pavilion Elite m9060n desktop PC and I have my monitor connected to my computer using the NVIDIA GeForce 8500 GT DVI - I port chart.  I want to use two monitors and on the back of the computer in DOS i/o ports, there is a VGA connector, but there is a black top, lid that States do not remove.  This means that the port is not available?

  YES, the white cover means that the port / ports are not available. Most HP consumer computers automatically disable the onboard graphics when a x 16 PCIe graphics card is installed

  2.i have also a port HDMI as part of the NVIDIA GeForce 8500 GT can I use that and the port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  Yes, you can use the HDMI and DVI-channels simultaneously to support two monitors. Here are the specifications of your desktop HP Pavilion Elite m9060n. According to the specifications;

  1 - S - video *.
  2 HDMI
  3 - DVI - I (dual link) *.

  Supports two displays at the same time

  According to observers, you may be able to use your current configuration to drive two displays. You can use two HDMI screens with a HDMI and a DVI-HDMI cable. You can use two monitors DVI - D DVI cable with a DVI-HDMI cable. You can also use a monitor VGA and HDMI or DVI - D and VGA monitor with appropriate adapters and/or cable. Please provide the brand and models of two monitors for most accurate response.

  3. can I use a DVI splitter with port DVI on NVIDIA GeForce 8500 GT to have two monitors?

  N °

• Is it possible (or useful) to replace the processor in my HP Pavilion Elite m9060n...

  Is it possible (or useful) to replace the processor in my media library of Rikouman Pavilion Elite m9060n PC... There an IPIBL-(Berkeley) motherboard with Intel Chipset G33. Intel Core 2 Quad Logo running up to 2.4 GHz. is there a processor more fast which will be taken in the Socket 775 and improve the operating speed? It is economically interesting if possible? Would be very happy comments from some computer guru, as I'm obviously a novice.

  Morrismomic, welcome to the forum.

  The existing processor is Quad core maximum that you can use.  Your only choice is the Core 2 Duo E6700 or E6850:

  http://support.HP.com/us-en/document/c01197633

  Personally, I'm not sure you'll see an appreciable performance gain with either.  The memory and the video card are major concerns, too.  The system is as strong as its weakest component.

  If your problem is solved, please click "accept as a Solution.

• HP Pavilion Elite HPE - 575 a desktop PC set up latest patch Windows 7 from Tuesday

  Hello

  My HP Pavilion Elite HPE - 575 a Desktop PC running Windows 7, 64 bit will not configure the last patch Tuesday, August 14, 2012 Windows. The computer seems if running all the updates correctly when stopping however the next time that you start it only configures approximately 30% before failing and then close to return to the previous state.

  Something has changed in the microsoft update that resolved itself after several days without doing me anything.

• New disk SATA hard for HP Pavilion Elite m9065.uk, a desktop PC

  I am wanting to buy a new hard drive for my HP Pavilion Elite m9065.uk, a desktop PC. Here are its specs:

  http://support.HP.com/us-en/document/c01242071

  Now, the material is not my specialty. I know that I need a SATA drive, but I don't know that one to buy? I will be limited to the capacity of HDD can I install it? I would ideally like to 1 TB.

  I guess I can't install a player?

  Thanks a lot for any advice.

  Hello

  Your computer is fairly new, you should be ok, installation of a 1 TB drive.  Older computers may have problems of card motherboard/bios with bigger hard drives.  You can also install a SATA2 drive, but if your motherboard doesn't support SATA drive will just default to this speed (SATA2 is backward compatible).  The player below is to consider.

  http://www.Amazon.co.UK/Seagate-Barracuda-7200-12-drive-cache/DP/B0024FAN24/ref=sr_1_5?ie=UTF8&QID=1287523497&SR=8-5

  Hope this helps,

  DP - K

• Installing XP - 64-bit in the HP Pavilion Elite d5200t ATX CTO desktop PC

  Hello!

  I recently got a HP Pavilion d5200t desktop pc. He came with pre-installed Vista 64 bit. Now, I want to install XP 64 bit or XP-32 bit and Vista 64-bit.

  I tried to install both XP 64 and XP-32, and he gave me a blue screen with error messages. In addition, I want to use the XP boot cd to partition my hard drive. Partition Magic gave me comaptibility warnings, so I did not. Any suggestions how get this resolved would be greatly appreciated.

  Thanks in advance

  Make sure first of all of the recovery disks.

  Search in the bio and see whay options you have for the AHCI mode. You can change it to IDE?

• Update the bios HP Pavilion Elite HPE - 480t CTO Desktop PC

  I just bought a hard drive 3 TB to my HP Pavilion Elite HPE - 480t CTO and he only sees a drive 746,52 GB under Windows 7 pro 64 bit. My main drive is a 1.5 to and he sees very well. where can I find an update of the BIOS using the new drive? I have been to the page "downloads of software and the driver" and it does not list one. Am I out of luck?

  When I ran Paragon booted from a USB stick to copy my 1.5 TB drive it given the disk as a disk of 2.7 to so I think the bios is seening it?

  EDIT: The Intel rapid storage technology software sees as 2 862 TB, but windows doesn't see 746,52 GB.

  Thank you

  Curtis

  Solved!

  Update card mother sata drivers and program "Fast storage Intel technology" and it now works fine.

  Went to ma-configdotcom and ran their detection app and it recommended JMB36X_WinDrv_R1.17.65_WHQL_eSATA.zip of JMicron and Intel's SetupRST.exe. I ran both, restarted the computer and viola! He works and see all the new drive.  I hope this helps someone else.

• HP Pavilion Elite HPE-372f: MS-7613 (Iona-GL8E and GTX 970 bios update

  Hi, my system is supplied with the card mother MS-7613 (Iona-GL8E! I'm trying to see if there is an update available to the BIOS before updating my video card for GTX 970.  I already upgraded my power to 600 W for the 970. My current version of BIOS [according to Windows system] is American Megatrends Inc. 6.07 date 19/05/2010. Please help me find where I can get an update of the bios for my motherboard.

  Here is more information on my system:

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-300-desktop-PC-series/4162190/model/427545...

  Right now I'm really confused!

  After reading the return of Best Buy Canada policy [which gives me 14 days to return my purchased GPU]. I decided to go against the advice I got from this thread and another HP forum.

  I bought the Zotac GTX 970 at Best Buy, thinking it could be a very small chance that it will work, and if it does not work I have he's coming back!

  To my surprise after installing it, it started no problem! I installed the latest drivers from the website of Zotac and then rebooted the system, but still no problems!

  I ran all the points of reference 3-DMark, more than twice with no problems! [which is about 7 times faster than my ATI hd5770]

  Here are my results: http://www.3dmark.com/3dm/6457066

  I played a few minutes with the deity: sin of origin with ultra graphics to 80 FPS and still no problem!

  I also played a few minutes with supreme commander2 [game 2010 year] at 60 FPS and still no problem!

  I close on my computer about ten times, just to make sure that the system is stable and still no problems!

  Here are two pictures of my information system showing that I run the version of the BIOS HP 6 and the GTX 970!

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 447 & authkey =! HfU-APzSFQeV0Il & v = 3 & ithint = 2cjpg % photo

  https://onedrive.live.com/redir?RESID=7325D1B597E8FED5! 446 & authkey =! AGmYzz92v2tiaNw & v = 3 & ithint = 2cjpg % photo

  I only used it for two days and I hope I won't run into problems in the future!

  So my advice is to check your store for their return policy and try again the GTX 970 yourself! Don't let not the other experiences of volunteers/users HP form this discourage you from trying it!

  PS Don't forget to upgrade your block of POWER 500 W. [I mine improved 460-w 600 W Corsair]

• HP Pavilion Elite m9060n 32 Bi: updated my HP m9060m Vista 32-bit to a 64-Bit Machine

  I want to upgrade this computer to a 64-bit and would like to know if this is possible.

  CameraMan01

  Thank you very much for the information.  I'll get the 64 bit OS.

  CameraMan01

• How can I activate the boot usb for my HP Pavilion Elite HPE - 480t CTO desktop PC?

  I have a usb key with the Windows operating system installed. But I could not find a way to get started on the drive on my hpe - 480t.

  Any suggestion?

  Thank you

  Wayne

  NVM. I can boot from a USB on the computer.

• HP Pavilion Elite HPE-170 has Desktop PC - graph disc flashing - Normal?

  Hi all

  I just bought a http://support.hp.com/us-en/document/c01969875

  and I was wondering if the orange graphic of 3 discs piled on each other in the right upper part of the façade of the tower is supposed to flashes and turns off all the time?

  Or is it telling me that I'm supposed to do something?

  Hello BigBad64, while I'm not familiar with your system, the light you describe indicates the hard disk activity.

  Normally, that's fine because it flashes a little or even a bit, depending on what the system is doing at a given time.

  Even if you can not do anything, the drive hard activity can and cannot, turned on because of background running applications and services.

  There is also the possibility of Windows running the task of "Indexing", which is supposed to help with research on the system.

  I'd be too concerned about this, as there doesn't seem to be normal.

  I noticed that you mentioned that you just received this system. It was released in December 2009 for customers in Australia.

  This would be not for me either, just thought that it kinda weird that you have just recently.

  I hope this helps.

• Replacement for HP Pavilion Elite e9250t HARD drive

  I get an error message saying "A disk in a RAID 0 volume is a failure".

  I plan to replace both drives, currently, to 500 discs with a capacity higher than as 2 TB each. The Pavilion Elite e9250t supports 2 TB disks? And can I install them with RAID, so that my data is protected?

  Hello JMHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you have questions about your desktop PC HP Pavilion Elite e9250t supports 2 TB disks and whether or not it supports RAID. According to HP Pavilion Elite e9250t desktop PC product specifications and configurable Options , your computer supports "2 TB (2 x 1 TB) 7200 RPM SATA 3 G (3.0 Gb/s) ' so the answer to your first question is 'YES', it will support a 2 TB hard. As to your second question as to if she supports RAID, indio motherboard (which is what you have) supports the following:

  • Integrated RAID controller: P55 (same as previously introduced application ICH9r RAID)
  • Steps to configure RAID (internal link to setup for P55, even the steps of configuration for ICH10r and ICH9r)
  • Intel RAID solution is called Intel Matrix Storage Technology (outside link)
  • Only some models indio compatible ship RAID (see datasheet for your model). Compatible RAID means that the system is ready to be configured for RAID 0 or RAID 1.
  • Migration from 1 to 0 is supported by material in the world.
  • RAID modes supported *:
    • RAID 0
    • RAID 1
  • Additional resources:
    • Overview of RAID
    • Intel Matrix storage technology (outside link)

  * NOTE: three hard disks requires a RAID 5 and RAID 10 four hard drives. While the hardware can support other RAID modes, only RAID 0 and RAID 1 modes are supported on models that include this motherboard.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HP Pavilion Elite HPE - 480t computer and burner blu - ray 12 x HP bd 340i

  Model bd340i in the middle of last year, I bought HP 12 x Blu - Ray burner. When I bought my HP Office in December 2010 model HP Pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc.

  I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.

  At this point, I don't know if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on DVD but not blu - ray, DVD plays fine but can't play or burn blu - ray discs.

  Could this laser blu - ray crapped out and the dvd reading and writing laser still works?  Must a blu ray burner still lasers for both media (DVD and Blu Ray)?

  Everything else with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.

  When did you purchase your product? : December2010
  Product HP Pavilion Elite HPE - 480t CTO desktop PC
  Select a problem area: other
  What is your serial number (SN): [personal information deleted]
  What is your operating system? : Microsoft Windows 7 Home Premium 64
  Your computer is unable to work with Accessories products? Please select all the boxes. other
  What type and brand of CD/DVD media you are using? Kodak 25gig of Bu-Ray and dvd HP
  The CD/DVD writer burner was built in the computer when you bought it? NO.
  You hear the sound from the speakers connected?
  The display on the product seems to work correctly? Yes
  Have you connected the product to your TV, DVD player or a music system? NO.

  If there is an error message, please specify: cannot read media
  Description of the problem: I bought burner HP 12 Blu - Ray model bd340i in the middle of last year. When I bought my HP Office in December 2010 model HP pavilion Elite HPE - 480 t, I installed the burner and everything worked very well. Today, I tried to burn a blu - ray disc, and he returned with can't read media, which stood on imgBurn. So I tried the same thing on the burner systems, and she came back as no drive in the status bar. I have also tried burning CyberLink software and the same thing no disc. I then tried to play the two store bought and home made blu - ray disc and could not read media. I was ready to blame it on a bad burner but then I tried a regular DVD the two store bought and done House, and it plays very well. I then tried to burn a single dvd double layer with all the burning software three I have and it is still fine, no problem. It's just the blu - ray media that cannot be read or written. The only supports blu - ray, I used from the first day was Kodak and never had a problem. That's what baffles me.
  Please provide previous steps of troubleshooting, or information that can help HP help you. : I don't know at this point if it's a hardware or software problem with the computer or burner blu - ray or both. 3 different burning programs works fine on the DVD but not blu - ray, DVD plays very well, but can not play blu - ray.
  Nothing changed since the device was working properly (installation of SW, settings, wiring, etc.): everything with the computer works fine. I even tried uninstalling and reinstalling and it is the same, I tried to update the drivers and firmware on your site and still does not work. Please help.
  How would you describe your level of technical skill? : intermediate
  First name Peter
  Name, first name rider
  [Personal information]

  Arcticwolf, sorry, I miss read your post details. That strangely resembles a failed drive. Try unistalling and reinstalling the drive, including the software and driver. If a problem has occurred, it may fix.

• Pavilion Elite M9040N turns on or turns off continues

  I have a Pavilion Elite M9040N media center desktop computer and it began to turn and turns off constantly.  The fans, the DVD player and the power that all light turns on for about 3-4 seconds then it turns off for 3-4 seconds, then starts the cycle again.  Does not get the bios start and nothing appears on the monitor.  I changed the power supply hoping that was the problem but no luck.

  Anyone encountered this before?

  Anyone know what is happening?

  Thank you

  John

  Final update

  Thus, the slot and off tension of the issue was due to a fault on the motherboard.  In order to get what they functional system once again I have had to replace the motherboard and video card (I don't know why, but this card is not as well).  I also replaced both of the hard drives, upgrade to the C: 1.5 TB drive and a D: 2 TB drive and power.  I bought a new copy of windows 7 64 bit and did a new install and updated all the drivers.  I was able to transfer all of our data, photos, music, etc. among the old readers on the nine with an external SATA cable.

  I'm happy to be up and running again but in hindsight, I have pretty much rebuilt all of the computer.  I hope that this will last a few years.

  Thanks for all your help and suggestings

• How to add to my HP Pavilion Elite HPE-590uk Usb 3.0

  Hi does anyone know if I can improve my HP Pavilion Elite HPE-590uk for usb 3.0 and if so could you recommend a product that I could buy to do this.  Thanks in advance.

  One of them check it:

  http://www.overclockers.co.UK/showproduct.php?ProdID=CC-003-AK

  This is to use a pci-e x 1 card. You have 2 these slots available. This will show you how do:

  http://h10032.www1.HP.com/CTG/manual/c02255267.PDF

  See the section on the replacement of a card.

  Instead of plugging on the long black slot which is a video card plug into one of the slots black short. You have Windows 7 I think which means that you will need a driver, but that should come on a CD with the card. Will need you a power connector (molex) on the map, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.