Satellite M70 - 354 - no sound after having some work done.

I got a Satellite M70 354 without software. I downloaded the drivers from Toshiba site tried to install XP, but when I came to SoundDrivers I found different situations.

As a first step, the President-symbol was visible and I heard the wave when you start and shut down Windows. After doing some work, the symbol was always there, but no sound was to be heard. I think it has to do with the different drivers installation sequence.

Can anyone provide a solution such as:
(1) LANDriver
(2) sound
(3) display

Thank you!

Hey mate,

Have you already checked for yellow exclamation marks Device Manager? You must make sure that the sound card is listed there without yellow exclamation point. Check it!

I put t know but maybe that only the sound is muted? You can enable or disable using FN + ESC.

Finally, and especially in what concerns the order of installation you can find the document on the Toshiba page installation instructions. There, you can check the correct installation for your laptop and XP order.
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

Welcome them

Tags: Toshiba

Similar Questions

  • Is it possible to upgrade the processor on Satellite M70 - 354

    Hello!

    Does anyone know: is it possible to upgrade the processor to the Satellite M70 - 354?

    Thank you
    Bastian

    Hello

    Usually it of not possible to upgrade the processor.
    Of course, some people here have managed to upgrade the processor, but following some functions and features as don t work module cooling.

    I do not recommend upgrading the processor. No one knows if it runs correctly.
    Some processors are welded on the map and there is no possibility to remove it.

    This is why don t do if you are not sure it will work 100%!

  • Compatibility RAM with Satellite M70 354

    Hello

    I have the laptop model Toshiba Satellite M70-354 with Samsun 2 * 512 MB RAM DDR2 * pre-installed.
    There is the description on RAM - * DDR PC2 4200 *.

    I want to up-grade/replace my RAM to 2 GB.
    I brought again * 2 GB of RAM of the Transcend.
    Disription written the i.e. - * DDR2 667 *.

    I want to know that i * s this RAM is compatible * with my laptop?

    Can someone provide me with support on the same?

    Thank you

    Chirag

    Machine tender specifications for this old compatible RAM modules are:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)
    1 GB OF DDR2 400/533 (PA3411U-1M1G)

    If you want to use max supported 2 GB I recommend to use 2 x 1 GB (PA3411U-1M1G).
    These modules are tested and 100% compatible.

  • Can not find the drivers for Satellite M70 354

    Where can I download drivers for Satellite M70 354?
    I can't find the recovery cd!

    I agree with Liam
    The M70 Sat is an oldie, so it seems that the drivers for the old machines are in the area of the Archive page of the driver.

  • Satellite M70 354: how to change the display?

    Hello!
    My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

    Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

    Maybe you can help me.
    Thank you!

    You should know that the display is one of the parties outside the laptop computer motherboard expensive.
    The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

    That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
    The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

    I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

  • Satellite M70-354 - is compatible with another motherboard?

    Hello guys,.

    I need to replace the motherboard for a Toshiba Satellite M70 354 PSM70E.
    The card mother inbuild is a K000033860, so it is compatible with any PSM70E mainboard avayable (K000XXXXXX)?

    Thanks for any help
    5urprise

    I think so. Satellite M70 comes with two different mothers.
    One is with the graphics card Intel for PSM70E models and is second with graphics card ATI for the PSM71E models.

    Thus, you can use any PSM70E motherboard and use it for other M70 with PSM70E model number.

  • Satellite M70 - no driver Sound download Windows Xp

    After reloading new version windows XP, I found under sounds & services indication was no audio device. So I guess what it means is that I need to download the Audio driver I've tried without success.

    The laptop is a Mod No. PSM70E and bought foreign websites in Australia do not have this driver available and told me to try of Toshiba Europe, I did but have had no luck.

    Does anyone have an idea where I can get the right Audio driver.

    Hello

    Drivers for Win XP for Satellite M70 can be found here:
    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

    Now choose Archive-> Satellite-> Satellite M Series-> Satellite M70
    Choose now the sub model and you will see all the available drivers.

    Here :)

  • Satellite Pro U200 - no sound after installing Windows 7

    Hello

    I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

    G.Magnason

    Hey Buddy,

    Have you already checked the site Web of Toshiba itself?
    http://EU.computers.Toshiba-Europe.com

    I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

  • Satellite M70 - suddenly no sound

    Hello!

    My son was watching a movie on my Satellite M70 the other night and just in the middle of it the stopped sound... second. He didn't touch anything (I was in the room with him when it happened) and there is no new parameters. So, I've updated all the audio drivers and crossed with all kinds of checkers 'hardware' (including my own common sense) and were not able to resume his.

    The computer is basically a company and there is an incredible amount of information about this. This means that I really don't want to make a full recovery. I surfed a bit and seen that others have the same basic problems. They're told to reinstall the drivers and try to downgrade and upgrade and 1 million other things that should work. I mention this because I have done all this. I'm at the point where I'm going to have to or consider in a store (guarantee is already done...) or simply live without sound (data backup is possible... just hard right now).

    What I was wondering if there is a comprehensive solution to this problem? It is the first time that I come to the forum and I am surprised that this problem is not mentioned. Do you have a solution for this? Can I do something to get it back? Since we don't have television, movies are the only 'entertainment media' that my children receive and silent movies were not what I had in mind ^ ^

    THX in advance
    purplefool

    > Do I wonder if there is a comprehensive solution to this problem? It is the first time that I come to the forum and I am surprised that this problem is not mentioned. Do you have a solution for this? Can I do something to get it back? Since we don't have television, movies are the only 'entertainment media' that my children receive and silent movies were not what I had in mind ^ ^

    General solution?
    I doubt that you could do try this one solution.

    First, you must connect the helmet to check if the sound seems to use the headset.
    If you could hear something using the headset then it would mean that there is something wrong with s for laptop speakers.

    In addition, go into Device Manager and remove the sound card in the list of devices.
    Then restart the laptop and check again.
    If it does not help then I would recommend creating a backup of your announcement of important files to recover the entire system.
    The sound still not appear then if say there is a problem of serious material, perhaps the sound card could be affected.

  • Satellite P200-1I4: no sound after hibernation

    Sorry for my English.
    There is no sound after hibernation mode. Audio device seems ok in Device Manager, but sound only appears after reboot.

    Hello

    It is certainly a problem of Vista.

    I remember that Microsoft has released a hotfix for this problem.

    Download and install the hotfix 937077 from the Microsoft Web site:
    http://support.Microsoft.com/kb/937077/en-us

    Good luck

  • How not to fix no sound after having made an optional update for conexant high definition smartaudio HD2, make it sound if go looking for manager__and device for hardware changes loose its restart the computer every time

    No sound after doing the update from microsoft for speakers

    Roll back the driver.
    In the future, do NOT use MSUpdate for pilots, drivers are taken, only if necessary, the manufacturer of PC or the manufacturer if a generic PC

  • Satellite L350 - no sound after uninstalling some programs

    Hello

    I just bought a Satellite L350 and I started uninstalling some programs.
    Since then, I have more no sond.
    I guess I uninstalled too much and I would like to know the program I have to reinstall and where I can find it.

    Thanks fo your answers!

    Hello

    Why you n t use the Restore tool of the Windows system that would help you to define the operating system back to the point of time at the beginning?

    I guess you deleted the sound/sound driver software and the System Restore tool should help you recover this software.

    Go to start - all programs - Accessories - System Tools - System Restore
    Then, select choose a different restore point. A choice, a restore point dialog box appears. Choose a restore point and click Next.

    Check it!

  • Satellite Pro L100 - no sound after reinstalling XP

    Hello

    I have a Satellite Pro L100 and I recently had to format the drive and install Windows XP.

    I don't have the CD to restart that came with the computer.

    I downloaded the drivers and utility on the toshiba site and checked that all were current and up to date.

    After extracting the audio driver, run setup.exe the device driver installation wizard appears and tells me to some equipment for the driver to install for.
    The problem is that there are absolutely no camera there.

    I checked and the sound card is in there, then it should be there in this list.

    Anyone have any ideas?

    Hello

    The downloaded audio driver package contains a fix of Microsoft KB888111XPSP.exe
    You must install everything first before starting with the installation of the audio driver.

    This is why I recommend to check device manager and remove the sound card and peripheral devices high definition audio.
    Then restart the laptop, install the MS hotfix, restart the computer once more and then install the audio driver.

    Good bye

  • Satellite A210-15J - no sound after waking from sleep in Vista mode

    Satellite A210-15J, RAM 2x2gb, BIOS v1.70, Vista Ultimate x 64 SP1 (with all hotfixes), driver audio Realtek v.2.01.

    After the Windows Vista recovery, high-definition audio (HDA) device is not working properly. There is no sound, only noise.

    This FAQ from Toshiba document may help you:

    [High definition audio device may no longer work after resume Windows Vista from hibernation or standby | http://aps2.toshiba-tro.de/kb0/TSB7601WX0004R01.htm]

    _The solution is simply: _
    You must download and install the fix from Microsoft site 937077.

    See you soon

  • Satellite Pro A10 CD Burning: after having burned the CD is empty

    Hello

    I have a Satellite Pro A10 and my CD burner stopped burning. Someone at - it? I also had a problem earlier where he would burn only 1 disc immediately after startup. It says it burns and goes through all the motions, but in the end the drive has nothing about it. I use Maxell discs and have had no problem before using these. If the CD burner is broken it is possible to get a replacement and they are also easy to assemble.

    Thank you

    Hello

    It is really possible that the drive is defective. Before Exchange you it the only thing, you can try is to check if there is some success if you use different empty media (producers) and burn it using a few different burning applications. I recommend you to use NERO software of engraving.

    Also be sure that the engraving option is enabled and not only option called simulation.

    Replacement should not be problematic. If I remember correctly from the drive is fixed with a screw and you can find it in the bottom corner near the drive itself.

Maybe you are looking for