Satellite P L50-B-1 1 - wireless and video questions

Similar Questions

• Satellite A80: How to restore the audio and video codecs?

  How to restore the audio and video codecs that are installed by default on my Satellite A80 with XP Home edition?
  I removed the safe mode, due to a problem with the Pinnacle Codec installed by Pinnacle Studio 10.
  Now, I need to put the video standard in audio codecs.
  I already downloaded the Microsoft Mediaplayer codec package and video sound new fr in Media Player.
  Unfortunately I have always its program to diagnose Toshiba during the test of its Midi and Wave.
  System Restore came with the message that the restoration was not possible because no changes had been made.

  Post edited by: roel

  Hello

  Try to use the tool "system restore."
  This application restores the operating system to the beginning.
  Maybe it will work.

• Satellite L650 - crackling sound while playing games and videos

  I have a Toshiba Satellite L650 and have problems with the sound... when I play, games or videos he makes a noise cracky and sort of trolling... it happens as well with slower and faster games and videos in all quality´s. I think that the problem started after the update drivers I did the site toshibas, with the right model and stuff...

  Can anyone help?

  Then I have another question! When you play games like civilization iv or nfs carbon (which are not so high end) after 1 hour reading of the temperature of my cpu is almost 70 Celcius... and when he's in the game call of duty 4 its same 80 c so I stopped to play... I know that this problem is regulair with toshiba , but even while surfing around its 55 ° c... should I accept this, or is there something to do? (this is a new Toshiba L650 psk1JE)

  0101 - operating system: Windows 7 Home Premium 64 - bit (6.1, Build 7600) (7600.win7_gdr.120305 - 1504)
  0102 - language: Swedish (locale: Swedish)
  0103 BIOS: InsydeH2O Version 2.40
  0104 - processor: Intel (r) Core i5 CPU M 460 @ 2.53 GHz (4 CPUs), ~2.5GHz
  0105 memory: 4096 MB RAM
  0106 available OS memory: 3958 MB of RAM
  0107 - Page file: 2612 MB used, 5301 MB of available space
  0108 Windows Dir: C:\Windows
  0109 DirectX Version: DirectX 11
  0110 - DX setup parameters: not found
  0111 - DPI setting: using System DPI
  0112 - system DPI setting: 96 DPI (100%)
  0113 - DWM DPI Scaling: disabled
  0114 DxDiag Version: 6.01.7600.16385

  ----------------------------------
  02 - processor
  ----------------------------------

  0201 legend: Intel (r) Core i5 CPU M 460 @ 2.53 GHz x 4 ~ 2534 MHz
  0202 CurrentClockSpeed: 1190 MHz
  0203 L3 Cache: 3,00 MB
  0204 L1 Cache: 32,00 KB
  0205 L2 Cache: 256,00 KB

  ----------------------------------
  03. video adapter
  ----------------------------------

  0301 - card Name: ATI Mobility Radeon HD 5650
  0302 manufacturer: ATI Technologies Inc.
  0303 - Type chip: ATI (0x68C1) graphics card
  0304 DAC Type: internal DAC (400 MHz)
  0305 key: Enum\PCI\VEN_1002 & DEV_68C1 & SUBSYS_FD121179 & REV_00
  0306 - display memory: 2737 MB
  0307 AdapterRAM: 1.00 GB

  > I think that the problem started after the update drivers I did the site toshibas, with the right model and stuff...
  Can you please tell us what drivers have updated you and why? What was wrong with the old drivers?

  When you start your next portable speakers test time using preinstalled Toshiba diagnostic tool and post the result here.

  What about the temperature of the laptop. 80 c is high temperature but still not critical, and if your mobile phone is placed correctly on the desktop and the cooling fans are not blocked I think you can continue to play the games.
  Before the games close all unnecessary applications and uses laptop computer on power plan to high performance.

• Satellite P500 - freezing when inactive, the his and other questions

  Hello

  I have a Satellite P500 (bought in January) with Windows 7 and I've always had and some problems with it since I bought it:

  -First of all, my serial number is not for the toshiba Web site, which is annoying when I want to update my drivers. In addition, automatic detection does not work. And when AI attempt to manually select the model, the only available is the "P500-1GN' (I'm sure that my model is just"P500").

  -Second, sometimes, when I don't touch my computer for a few minutes/hours, it freezes and I can't do anything on this subject, I just reboot it. Sometimes, I take just the mouse, the cursor still moves but I can't click on anything and 5 seconds later, the cursor hangs also. Another time, I was chatting on Skype (voice chat) without touch to the computer and when I will come back, the seams of frozen screen, I couldn't do anything with the keyboard or the mouse, but I could still chat with Skype.

  -Thirdly, I also have some problems of sound. When I listen to music and do nothing on the computer, no problem. But if I do something (like go on inernet, copiing files, etc...), I have some very annoying noise interference. I try with the speakers and headphones, it's the same thing.

  -Fourth, less annying, then the others. When I type a text on the keyboard, somethings, the cursor from writing just go somewhere random in the text (it happens twice while I was typing this message...).

  I tried to do a factory restore. Also, I have a version update of Avast, Spybot and Comodo Firewall, but I can not find the cause of these problems. I am wandering if I should ask for a replacement or something...

  So... can anyone help me? Thanks in advance.
  Oh and sorry for my bad English.

  Hello

  > First of all, my serial number does not exist for the toshiba Web site, which is annoying when I want to update my drivers. In addition, automatic detection does not work. And when AI attempt to manually select the model, the only available is the "P500-1GN' (I'm sure that my model is just"P500").

  LOL: D didn't you notice that the Toshiba driver page contains the series of laptop and has no lists the unique laptop models?
  Satellite P500-1GN is a part of the series PSPGSE call with P500 PSPGSE

  > Second, sometimes, when I don't touch my computer for a few minutes/hours, it freezes and I can't do anything on this subject, I just reboot it. Sometimes, I take just the mouse, the cursor is always moving, but I can't click on anything and 5 seconds later, the cursor freezes also. Another time, I was chatting on Skype (voice chat) without touch to the computer and when I will come back, the seams of frozen screen, I couldn't do anything with the keyboard or the mouse, but I could still chat with Skype.

  This may be related to different issues; problem in the system, memory problem, etc. graphics driver problem
  However, check the advice posted by Akuma; try disabling the USB selective suspension tuning"in the Advanced Power Options

  > Thirdly, I also have some problems of sound. When I listen to music and do nothing on the computer, no problem. But if I do something (like go on inernet, copiing files, etc...), I have some very annoying noise interference. I try with the speakers and headphones, it's the same thing.

  Update the audio driver is worth a try

  > Fourth, less annying, then the others. When I type a text on the keyboard, somethings, the cursor from writing just go somewhere random in the text (it happens twice while I was typing this message...).

  I had the same problem with the cursor, but it wasn't a really a problem. This is the reason why the cursor jumped around I touchpad the touchpad accidentally while typing.

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• Satellite Pro S300: Command wireless and Bluetooth and save this config

  Hello

  In the normal state, I want to have active bluetooth and the wireless off (it would be good if it can be activated by pressing Fn + F8)

  Problem: Every time is turn on the laptop (or reboot), the without wire is activated and not the bluetooth. So I have to press Fn + F8 to turn off Wireless (which turns off wireless and bluetooth) and then press Fn + F8 to select bluetooth to activate bluetooth. How can I save this config?

  Thank you

  Hello

  Unfortunately, it of not possible to save these settings.
  But as far as I know that the settings should not change after a reboot of the laptop.

  But you can check the Bluetooth settings in the folder utilities Toshiba.
  There is a general named tab that contains a few options.
  Check this box

• Satellite PSKJNR L50 - A - 10 Windows and hibernation buggy

  Hello! I have updated to Windows 10 L50 - A PSKJNR book.
  And I lit on that hibernation. After that the hibernation of update worked fine, but after my Windows 10 had two updates of Microsoft System.

  After that the second update took place on 13 and 14 August, that my laptop stopped hibernating. Now when I press the power button or simply close the lid of my laptop seems to Hibernate and turns off. All eyes, as usual.

  But when I turn on laptop starts and then turns off by itself. Then I press the power button again and Windows 10 boots from scratch as if it had never been hibernating.

  I studied the Windows event log and found two errors that occur at startup. It has code 6008 and others - code 41. I have updated all the drivers to the latest version, but it did not help.

  I contacted Microsoft tech-service, but they said it's a common problem these days and that the last system for Windows 10A of the incompatibilities with the power Toshiba L50 configuration - update BIOS.
  They also said that Toshiba has to work here, because this isn't for lack of Microsoft.

  So, if there is no solution to the problem? I don't want my laptop everything start over again after each power off, because it takes time.

  After that the hibernation of update worked fine, but after my Windows 10 had two updates of Microsoft System.
  After that the second update took place on 13 and 14 August, that my laptop stopped hibernating.

  What happens if you delete the MS update?
  You said that everything worked well until the update has been installed.

  It would be interesting to know if the laptop would be without this update.

  In addition its recommended to update the software Toshiba to win 10 compatible version.
  Win 10 pilot can be found here:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite Pro L50-B05D - need driver for Windows 7 WLan

  Hello

  I bought a * Toshiba Satellite Pro model L50-B05D psktaa - 001 05d *.
  I needed a new machine because I was starting a new job the next day.

  During an installation out of office 2013 the machine in one of its discounts to zero was a catastrophic error... and has refused any attempt of recovery. around 7:00 in the night...

  I needed an operational machine for work... the next day

  I took out my Windows 7 and proceeded to reconfigure the computer and install Windows 7... Machine is operational, BUT I can't get the Wireless LAN works... for the model I there doesn't seem to be a wireless lan driver...

  The functions of network card BUT not wireless LAN...

  Please can someone tell what is the right driver LAN wireless to the machine...

  Thank you

  Harpoon2222

  Hello

  Your laptop satellite L50-B05D belongs to the PSKTAA series and this series was only released in Australia.

  But the similar series of portable Satellite L50 - B PSKTAE is released in Europe.
  The drivers of the EU Toshiba driver page should be compatible.

  Visit this page:
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose here.
  Laptop
  Satellite
  Satellite L
  L50 - B satellite
  PSKTAE
  Win 7 64 bit

  Note: there are three different Wlan drivers: Intel, Broadcom, Atheros

• Satellite Pro L50 - load capacity of low battery

  Satellite Pro L50, I got a warning box will appear from the Toshiba PC Health Monitor, who said

  "Your battery charge ability is relatively poor.
  After a period of time, the battery will lose its ability to perform in the max capacity & will need to be replaced. This is normal for the batteries. Click the help button for more information on the State of charge 'poor'. »

  By clicking on the help button, said the State of the battery to a third load capacity.

  Is this an indication that I need a new battery?
  The laptop is only 4 months old & I have a few concerns. Comments appreciated

  Best regards, mrpringle.

  If the laptop is 4 months old I recommend you to contact your dealer or directly the closest Toshiba sevice provider and explain the situation.

  You should clarify this with them and maybe you will get new battery free.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/
  Don't wait. Call the Toshiba service as soon as possible.

• USB 3.0 does not work on my Satellite Pro L50

  Hello boffins.

  I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

  I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

  The technician in the repair shop said:

  + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

  It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

  So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

  Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

  But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• Satellite Pro L50 - B - unable to connect at 5 GHz Wi - Fi

  Hello

  I just bought a new Satellite Pro L50 - B and it is unable to connect to the wifi of my company 5 GHz network. It connects well to the 2.4 GHz network, but poor performance on network thaat there.

  Is it possible to get the L50 - B to work in the 5 GHz range?

  Thank you

  Martin

  Frequency of 5 GHz is supported by 802.11 A and 802.11 N
  But if the WLan module is not compatible 802.11 A, then the standard 802.11 N will operate at 2.4 Ghz

  The question is: what are the standards WLan are supported by the integrated WLan module?

  Which module WLan is integrated?

• Satellite R830-143, disconnect the other wireless LAN PC

  Just acquired a Satellite R830-143. Connects to my LAN fine wireless, BUT...

  I have three other computers connected to the local network both wireless, and as soon as I connect the Toshiba, the other three disconnects.
  If I turned off the Toshiba the other three reconnect back (although sometimes I have to reset the router).

  Have tried to move the Toshiba around the House, but the same result.
  Router is pretty old, but it works with other computers (an XP running, a Vista, a Windows7).

  Any ideas gratefully received. (This is my first Toshiba - I'm pretty impressed, but if I can't do network to my other PC it won't be a big purchase)

  Hello

  No other computers also disconnect if you connect the Toshiba Satellite LAN?
  AFAIK the R830 is equipped with card Atheros Wlan that supports standard network 802.11b/g/n.

  It may be possible that other laptops using the 802.11 standards of B and the Satellite R830 connects to the router using 802. 11 g.

  Please check the settings of your router and also check the R830 TCP/IP protocol.
  All laptops must use the same standard TCP/IP IPv4 or IPv6.

  Go to control panel-> network & sharing Center-> adapter change settings-> right click-> properties-wireless network card
  You will find the standard TCP/IP IPv4 and IPv6
  don't forget that IPv4 has been chosen!

• Satellite A-L50-1 - distortion of the screen - restart is necessary

  Hi all

  I bought a Satellite L50-A-1of 6 months and 3 months, when the computer is 'ON' and if I move, I sound suddenly get a screen with distortion and I have no choice but to restart my computer.

  I thought it was a driver problem or an unstable version of windows, but as all drivers are up to date and I change anything in the computer, I'm starting to wonder if this isn't just a screen problem?

  * My set-up is described below :*

  Windows 8.1. 64-bit
  Intel Core i7 (2.40 GHz) - 6 GB
  Intel 4600 graphics card
  NVidia GeForce GT 740M

  You have any ide or has anyone already encountered this problem?

  Thank you
  Miloris

  > I thought it was a driver problem or an unstable version of windows, but as all drivers are up to date and I change anything in the computer, I'm starting to wonder if this isn't just a screen problem?

  You can perform a short test just to get more clarity.
  Next time when this issue would seem, you could connect an external monitor just to check if the same distortions would be visible on the 2nd monitor.

  If distortions are NOT visible on the external monitor, the graphics card and the graphics drive isn t the troublemaker, but probably the internal display module is affected.
  In this case, the display should be replaced.

  Where the distortion appears on the external monitor as well as on the internal screen, the graphics card or the driver could cause the problem.
  In this case, you should fistly whole laptop back to factory settings, installation of the image of Toshiba using HARD drive recovery. After that, you should try to install the latest graphics driver.

  If this procedure doesn't help, the graphics card must be verified, but it requires special software of diagnosis.

  This would require additional assistance of service provider allowed that the unit is still under warranty (as you say it s old to 6 months) and therefore, should be set the laptop under warranty conditions.

• HP Pro Plus 6800: error 0 x, 00000057 wireless and wireless Direct properties of the Windows Control Panel printer - print a Test Page

  I have a laptop Toshiba Satellite of Win7 64 bit and a HP 8600 Pro Plus,
  update firmware and drivers about 2 weeks for the 8600 was a
  a long time I have been updated, which is connected wireless has decided to
  Direct to print Wireless Setup once the program installation, I tried to do a windows
  Print the Test Page in the printer property Panel, somewhat normal for
  set up a printer

  Under the connection of the conciergerie, I got the error message 0 x 00000057
  Under wireless direct printing, I got the same error 0 x 00000057

  After spending the time to check the settings, connections and asking
  Why? I decided to see that if I could print the docs, I print a PDF file,
  Notepad and Word documents in each application under the two
  configurations without problem.

  Under the wireless connection, I started the Web Services module
  and was able to make the impression within the Web Services Test page
  module without problem could not yet do the printing Test Page
  in the printer properties panel.

  I ran Print and Scan doctor who, to my surprise mentioned
  a conflict of Driver, I welcomed this program to uninstall the driver,
  went looking upward for the driver and the same driver was so done
  No download but to remove the driver and reinstalled the driver.
  Always error message here.

  I'm now tempted to delete a direct print wireless and see
  What happens if the error disappears, if she does not unstall all
  associated with the printer and do a clean reinstall. In case of emergency
  is there an alternative to the use of the Web Service module to the setting
  When not connected to the wireless network?

  I think that the Panel of the printer would do this (I'll watch this later

  spend enough time on it), or do I need to run Web Services to

  direct wireless installation, just think about this, otherwise I'll shoot

  a usb cable.  Maybe if I install Direct wireless on the printer control panel

  the message will disappear as the installation of the printer program, not software

  on the laptop?

  It is a minor problem since I can still print but question why!

  See other issues about this error message I thought

  spend my experience with this error.

  Always had a number of things to think and try, once again.

  If your getting this error message I would suggest trying a test page printed

  within the module of Web Service to see if the message developed.

  Could not back the driver so I removed the printer driver

  by deleting.

  19/07/2011 Date print driver
  Print driver version 26.0.0.0

  and removed software in Add and Remove software Hp also had to turn

  disable the wireless module directly on the printer to reinstall from the CD.

  Reinstalled printer/software form the CD supplied with the printer, the

  Driver date is 08/12/2009 Ver.9.0.0

  No more error in configuration.

  is the answer to the error message 0 x 00000057 or 0x00000xx

  associated with the driver? Or just the 0 x 00000057?

  Could not find a list of drivers between the driver and

  the driver on the CD.

  Will not update the driver for a good while or until I have too.

  The dates on the drivers are only about two years apart, the

  The version numbers are an issue questable.