Satellite P10: How unzippe and install the drivers

Similar Questions

• Windows is config not download and install the drivers on windows 7

  Original title: USING WINDOWS UPDATE

  Windows is config not download and install the drivers on windows 7 please help.

  [Tip] Customize the Installation of the driver software from Windows Update device

  hope that helps.

• I have a Vaio VGN-FE730FM how do I install the drivers for the web cam Motion eye?

  I need drivers for Vaio VGN-FE730FM

  I have a Vaio VGN - FE730FM how should I install the Motion Eye web camera, I search the web site vaio I found the driver and used, but did not work. Is there a procedure for o it. I had to reinstall my whole system and I lost the SM bus drivers, bus modem high definition Audio, USB 2.0 web camera. How should I install the web cam?

  Hello

  • What happens when you try to use it?
  • You receive an error message?
  • Have you checked the State of the Webcam in Device Manager?

  Here are the steps:

  1. Click Start, then type devmgmt.msc and press ENTER.
  2. Check the status of the Webcam.

• How do I install the drivers during the installation of windows 7

  I did an install home premium windows 7 dvd by burning a file .iso I downloaded on a dvd and I am facing problems installing drivers. I extracted the drivers on an external hard drive and installing windows 7 they ask me about the drivers before installing windows.
  I have all the drivers in the external hard drive but I tried several times to install them using the button browse and locate the folder that contains every driver and install it alone, but his does not work. So is there a better way to install the drivers?
  Thanks in advance

  Hello

  During the clean install of Windows 7, users are generally required to install a few drivers for the internal hard drive. These drivers must be written to a DVD disc / USB key and installed when prompted.

  In this case, I believe, is that you are trying to install the wrong drivers. The installation requires the internal hard disk drivers. This driver will depend on the configuration of the internal hard drive (RAID, SCSI, etc.).

  Another possibility could be that other equipment are not properly recognized by Windows 7 installation. You try to install Windows 7 and burn the ISO on a USB bootable and start the computer to the top of this USB key. Here's how you can do:

  http://www.microsoftstore.com/store/msusa/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  If, during this installation, you get an error saying that a required CD/DVD or USB driver is missing on the computer, you might see the message marked as answer in this thread.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/a-required-CDDVD-device-driver-is-missing-USB/61eda679-66cc-4512-B175-d02871394461

  Please get back to us with the State of the question.

• How do we install the drivers for my HP 8620 on iMac running Didier?

  I use Windows XP on my iMac running Didier and just took all the drivers for my old HP 7520.  I've updated to HP Officejet Pro 8620 and cannot install the drivers for the new printer.  Any suggestions?

  Thanks for the clarification of Jim,

  You can download the Windows XP driver from the link below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-124140-4&cc=us&DLC=en&LC=en&OS=228&product=5367614&sw_lang=

  Shlomi

• How to check and install the drivers for the card

  I wanted to play the game with my HP Compaq 8710p (Windows 7) and said that my video card driver and probably (other drivers noticed yet) are now uninstalled in my
  System. Could you please send me
  links on how to check the
  uninstalled the drivers and how to
  Download and install. Thank you
  in anticipation of the command prompt
  response.

  Zubyjoe

  Your uninstall information

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  or use Revo Uninstaller

  http://www.revouninstaller.com/

  New Nvidia driver

  FTP://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61072.exe

  Other drivers

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=3355688&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Application of Toshiba and install the drivers

  Yesterday, I received this email from Support from Toshiba updates:
  -----
  The following items have been added or updated on the site Web of Toshiba, last week for the models to which you have subscribed:
  Support bulletins:
  The Application of Toshiba and install using the pilots to identify the components preinstalled on a Toshiba computer
  Model: Satellite all
  -----
  I clicked on the link and found nothing to download so I guess this is the mode of access to this installation program that has changed. I decided to check my system anyway and tried to follow the instructions.

  There is no shortcut to this file in my programs menu or in the subfolder Toshiba menu programs. Where is this file so that I can create a simple shortcut to this installer?

  I use Windows 7 Home Premium SP1

  I agree with Ilay. If everything works properly don't change anything. Optimize the preinstalled operating system and some settings to make your computer more efficient and comfortable to use.

  You n t need more than that.

• Satellite A100 - how to re-install the package of value added?

  I had a problem with the crash of flashcards since I got my A100 is about 2 years. Today, I finally downloaded the update to the VAP and tried to install it. I received an error message telling me to remove the old VAP first. When I try to do via the Control Panel, the installation program seems to work according to the Manager of tasks (uninstaller?) but the progress bar never changes and the silence as computer advice that nothing is really happening. I tried this twice already, leaving to run for 30 minutes each time.

  I have 3 questions:

  1. can I update the VAP otherwise?
  2. can I solve the problem of flashcard otherwise crash?
  3. can anyone the flashcards explain to me in simple terms? Why are important (or useful)? I don't really understand them and never use them but have heard of problems if they are deleted.

  Please respond in terms of novice.
  Thank you.

  Hello!

  As I know the Toshiba value added Package can only be updated if you first remove the old version. I also recommend this way.
  But maybe you should try to remove the added value package with CCleaner. This program cleans the registry and the system. Then install it and clean the system. After this attempt to delete the VAP.

  The PPV contains the following important tools:
  -TOSHIBA components common driver is an essential component of Windows Vista. He will have to make the other original programming TOSHIBA works correctly.
  -TOSHIBA Power Saver controls energy by opting for optimal power settings, if the machine is connected or battery-based knowledge and based on the remaining battery power.
  -TOSHIBA utilities allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use. To start the utility, click the Start button and select Control Panel, and select Configuration HW TOSHIBA icon.
  -TOSHIBA utility to password allows you to set a password that restricts access to the computer.
  -TOSHIBA Flash Cards provides the Hotkey function and the function of pitcher who starts the keyboard shortcut function and sends the other TOSHIBA utilities.
  -Tool of diagnosis PC TOSHIBA can view a computer based information and diagnose

  Good bye

• How can I install the drivers for Boot Camp of MacBook Pro?

  Joe Kissel, author of "Take control of VMWare Fusion 2," recommends users to install Apple's Boot Camp drivers to access remote cameras Apple Remote and iSight in VMWare:

  To install the Boot Camp Windows drivers:

  1. with Windows running in the merger, insert your Leopard installation DVD.

  The Boot Camp installer should run automatically.

  Auto repair: If the installation program does not work, check to see if the virtual

  CD/DVD drive is in use. To do this, open the Virtual Machine >

  Menu of the CD/DVD. If disconnect CD/DVD is selected, select it. That

  should cause the Boot Camp Installer run; If not, click Start >

  (My) Computer and double click on the DVD icon.

  What I find instead is:

  

  Which is weird, because I do not use a MacBook Air, but rather a MacBook Pro (unibody). I can even see Boot Camp files on the CD/DVD drive, but don't know what to do with them.

  Telemachos wrote:

  Which is weird, because I do not use a MacBook Air, but rather a MacBook Pro (unibody). I can even see Boot Camp files on the CD/DVD drive, but don't know what to do with them.

  You can close Windows and then go into Windows Explorer on the CD/DVD drive and navigate to : \BootCamp\setup.exe and double-click it to start installing Boot Camp drivers. (The label of the disc will probably show that "WindowsSupport" in Windows Explorer.)

• Download and install the drivers

  has had to replace hhd. I forgot to make recovery dvd has therefore used a friends disc. I'm downloading all the drivers, I see many have 2 files. original driver then an update for this driver. the updated driver files are larger. should I download drivers or just new?

  The new driver 'day' is usually sufficient, unless they are actually updated from the previous version. However, stick with the updated version and get only the previous version if the installer asks.

• Where can I download and install the drivers for my printer?

  software question/printing device

  I had a new pc, bought new ink for my printer pold, to find that I had lost the driver, windows cannot find it, no option to update driver, is a pilot for "lexmark 2500 series (X 2550)" I need? Anyone know where I can get one? Thank you

  Hello

  ·         What operating system do you use?

  ·         Using Lexmark X 2550 or Lexmark X 2500?

  You can download the drivers from the Lexmark support site at:

  Lexmark X 2550

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=LEXMARK_X2550&segment=support&UserLocale=en_US&FromPage=null#1

  Lexmark X 2500

  http://support.Lexmark.com/index?segment=support&UserLocale=en_US&locale=en&ProductCode=LEXMARK_X2500&page=product&FromPage=null#1

• Satellite C55 - how to re - install the DVD player

  Hello world
  I inadvertently uninstalled the video/DVD drive on my Satellite C55 in last night. I tried to download the driver on the official website of Toshiba service, but it only came with a weird error message "cannot find our player on your system. I don't know how I can get it reinstalled. The laptop is on Windows 10 and has a 64-Bit processor. Can someone provide suggestions?
  1 million thanks!

  Hello world
  Just installed MacGo free Media Player and it works!

• Satellite P500-12F - Question about installing the drivers

  Have recently bought a new P500 Satellite 12F and I am very happy with it. This PC came only came on the market on 29 Oct. I decided this pilot site updates, bios, etc. and was surprised to find a few tens of individuals in the list.

  When I rang Toshiba support he told me don't bother to install as there may be a danger and if if its ok market don't bother!

  I would like a second opinion please.

  Satellite P500 is newer model comes with the latest drivers, tools and utilities for Toshiba laptop.
  It turns out that the Toshiba doesn't offer updates every month and, in my opinion, you don't need any update to date.

  I guess that your series of satellites well and without some serious software problems. So, touch of an operating system and be happy with your new toy.

• I try to install the Catalyst Control Center drivers. I get an error saying that I can only run this administrative only mode. I am the only account and always the administrator value. How do we install? Is CD and downloaded the drivers from the website a

  How can I install the drivers if I'm still in administrative mode? Is there a setting to turn off somewhere?

  Hi pfunk20000,

  Thanks for posting. Hold Left Shift and right click on the installer of catalyst and select "run as". From there, you can select administrator. Set the local administrator password and it should install without any problems.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Install the drivers for scanner and Fax for HP PC 2410 printer all-in-one

  I use a MacBook Pro with an operating system of El Capitan 10.11.4. I use a PC HP 2400 All in one printer/Fax/Scanner connected by USB to a network of airports Time Capsule. During the installation of the printer driver, the printer function to add printers and Scanners folder in preferences systems found the printer and installed the drivers. The same add function printers do not thin either driver Fax scanner. How can I load these drivers.

  Hello..

  Re download the drivers once again and then try to add scan and fax again drivers.