Satellite P10 - USB port no longer work

Similar Questions

• Satellite Pro L20 USB ports no longer work

  Hello

  A little bit ago, I experienced a few problems with my Satellite Pro L20. After he brought to life, I found out that the USB ports no longer work.

  Things I've tried so far:

  Reinstall the chipset drivers
  Update the BIOS.
  Ensure USB is enabled in BIOS
  Uninstall and reinstall the USB controllers via the Device Manager.

  

  The USB ports no longer work and I ran out of things to try. Any suggestions?

  Thank you

  Hello

  If possible, try to install the operating system with recovery media. On this way, you will have to factory settings. It's the best test you can do. If the problem persists, it may be a malfunction of the equipment. Sorry but on this path is not easy to tell what the problem may be.

• None of my USB ports no longer works

  Original title: activate the usb port

  Suddenly, the usb ports no longer work.

  Used a recoverypoint, but did not help

  Remove all usb ports and new discovered computer and installs but no result.

  There is power on the ports becase that a usb fan works

  What to try?

  Hi JoopSteenhuis,

  Try the methods and check the results below:

  Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   

  Method 2: Remove and reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

  f. restart the computer, and then reinstall the USB controllers.

  g. plug in the removable USB device and perform a test to ensure that the problem is solved.

  You can also see the following article for more information:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

   

  I hope this helps.

• USB ports no longer work

  all usb ports no longer work and I tried to fix all the methods have failed and he tells me that all drivers are installed and work properly... not

  all my devices that worked in one of the 3 usb ports. I tried all methods on the 'help' with questions. I get a msg that says that all devices are up to date and working properly but it always starts as "computer does not recognize this device ' click here to solve. I can't solve

  Hello

  You did all the people?

  Try a Place Upgrade or repair Installation. If this does not work, you will need help of a
  real computer store (not the leeks and the glances at a BestBuy or other big box stores) or the system
  Support from the manufacturer.

  This tells you how to access the System Recovery Options and/or use of disks of Vista
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Or you could do a clean install.

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• USB ports no longer work after upgrading Windows 8.1

  I have upgraded to windows 8.1 and from that moment, my USB ports don't work anymore. tried to check them, but does not (uninstall,...);

  I have a HP Pavilion 15-B050EB; I can't find the drivers for the USB ports on the HP site. can someone help me?

  called them; very friendly guy, but the only solution is a total recovery.

  which means a working day to do backups and re - install software programs...

  Thanks for your kind help anyway!

• USB ports no longer works after L7680 OfficeJet Pro printer installed...

  I am running Windows XP Pro SP3.  Before you load the printer all my ports worked (4 on the monitor, 2 on the front of the PC).  Once I'm installing all of them stop working.  The only option is to work with one on the front of the printer.   I am able to get my Western Digital HD to work on the USB port printer, but this one is fickle and only works sometimes (I have to restart to operate when it gives out).  I'm not able to use on the printer port USB flash drives. I f the usb port on the printer does not work, so I have no options.  I tried with a powered hub and it works at all.

  I was chatting with representatives of HP without result. If a HUB on the printer does not work it is a useless tool for me.  I need one that has no readers, etc.  Is this a reason to return to the item under warranty?  Or y at - it a way to get this thing to work.

  HP wants to tell me it's Dell.  Dell says it's HP.  I'm so confused and frustrated.

  What I discovered, after about 3 years, the computers are generally obsolete.  My computer was 1.1 ports and the printer connection 2.0.  As see you all new USB components say they are 2.0, but can work with 1.1.  Long story short, after reading this somewhere, I decided that I had to upgrade my ports.  I went to Microcenter (they have an online store as well) and bought a USB 2.0 PCI Card for $11.00.  At opened her top and broke in the new port and everything works well again.  It may not be what you want to hear, but it was all I could do.  I was told all empty printer resources USB and this is why the upgrade was necessary.  Hope this makes some sense to you.

• Satellite L750D - USB Ports do not work

  Hello

  a couple of days all three of my USB ports stopped working.

  I tried several USB devices and none make their appearance as being connected at all (check start > computer > devices with removable storage).

  The two on the right side of the laptop have never really worked systematically earlier and there again, but the left hand, we worked more or less all the time.

  If anyone can help that would be great
  Thank you

  Hello

  Have you tried to remove and reinstall the USB host controller driver in the past?
  If this isn't it.

  Go to Device Manager and expand the controllers Universal serial bus tree
  Here, the Generic USB hub and the USB universal host controller.
  Delete all of these devices from the list of devices and reboot the laptop.

  Usually once the system has booted, all devices removal must be found and resettled automatically. Wait until the end of this procedure and connect the USB device (ie the USB mouse) to USB port just to check the functionality.

• Satellite C650 USB ports does not work

  Hello

  I have trouble with me laptop C650. USB ports yesterday do not work after you connect USB stick, SD card or some.
  Now I don't know if it's a hardware or software error.
  I tried to restore the system, change the USB drivers, perform the maintenance of PC and check the antivirus, but nothing did not work.

  Laptop computer ads?

  Thank´s for more info...

  Hello

  You can try to refresh the USB ports and the controllers that appear in Device Manager.
  Disconnect all USB devices and go to Device Manager.
  Here, expand USB area controllers.
  Now delete all USB host controllers and hubs root USB in the list.
  After this reboot of the laptop.
  Finally, the Windows operating system should start and should recognise all USB devices once again. Now connect a USB mouse and check if you can use it.

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• USB ports no longer work after windows 10

  Hello

  Tried to solve the problem I have with my usb ports not recognizing not not the mobile hard drive trying to help pre Windows 10 answers but no luck.

  Please could someone advise or help me reinstall my usb drivers? for my system, now I win 10. Thank you

  Steve

  Hello

  Thank you for your help...

• Dell XPS 14z 3 USB port no longer work after reinstalling windows

  Hello

  I have re-installed windows on my XPS 14z,

  Installed all the drivers (chipset Inc., bios, etc.).

  updated all windows updates.

  but the driver of the USB port of the SS was not installed. (you can see on the device as "Universal Serial Bus (USB) Controller" Manager without driver)

  I've looked everywhere, I tried Dell PC checkup, pilot automatic search etc.

  On these forums, I saw a similar problem with the XPS 15z and tried their solution without success.

  can someone point me to a driver?

  Thank you

  Hi Avp40,

  Has solved my problem when I re - installed "Texas instruments TUSB 7320" driver from the driver disk.

  Hope this helps you.

• USB ports no longer work after the downgrade to windows 7

  I bought the new laptop model No.: E5 - 574G. It comes with windows 10 I don't feel comfortable with windows 10 then, I installed windows 7, but after installation of windows 7 and I installed all the drivers and even driver USB but USB is not showing / detection with laptop. I see when I go the usb is connected present in the BIOS boot sequence. I have also followed the process of uninstalling the driver and then restart the windows but it does not solve this problem.

  Let me know how can I solve this problem.

  Thank you

  Pleasantries,

  Mufasil.

  Thank you very much for your answer quick, I did but it shows me the list of drivers, I select Universal Serial Port and I see what we should I choose.

  

• USB ports do not work. Missing in Device Manager USB controllers

  My USB ports no longer work after my computer crashed and I did a manual restart. As I go into the Device Manager the USB controller tab is absent even after I show hidden. I got no message error, nor do I see the yellow triangles. I have a gateway lx6200, 32-bit. Windows 7. system type x 86. Thank you

  Hello

  Thanks for the fast display update on the State of the question.

  Please click the link provided below which has Windows 7 drivers available for the Chipset.

  http://CA.gateway.com/GW/en/us/content/drivers-downloads

  Note:

  Please enter the model number, and then select the operating system as Windows 7 32 bit in the menu drop-down.

  Thank you.

• USB port have stopped working

  Original title: windowsz 64-bit acer aspire 5332 usb ports no longer working?

  My usb key, used to work now that they just stopped? IV tried everything to remove all the drivers and install again and also have rebooted my laptop, if someone can help I would be very grateful! : o).

  Hello

  
  For further assistance, you can contact Acer. Check out the following link.
  http://support.Acer.com/us/en/default.aspx

• Re: USB Ports do not work on my Satellite L830-145

  Hello
  I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
  Maybe here someone will have an idea

  When I start the computer power light before windows starts and goes dead when windows starts loading
  On USB3 I can recharge the phone, but it won t recognize anything in windows
  Any help much appreciated.

  According to specification for laptop, your laptop comes with Win8 64bits.
  Using the original version of Windows preinstalled?

  All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.