Satellite L750D - USB Ports do not work
Hello
a couple of days all three of my USB ports stopped working.
I tried several USB devices and none make their appearance as being connected at all (check start > computer > devices with removable storage).
The two on the right side of the laptop have never really worked systematically earlier and there again, but the left hand, we worked more or less all the time.
If anyone can help that would be great
Thank you
Hello
Have you tried to remove and reinstall the USB host controller driver in the past?
If this isn't it.
Go to Device Manager and expand the controllers Universal serial bus tree
Here, the Generic USB hub and the USB universal host controller.
Delete all of these devices from the list of devices and reboot the laptop.
Usually once the system has booted, all devices removal must be found and resettled automatically. Wait until the end of this procedure and connect the USB device (ie the USB mouse) to USB port just to check the functionality.
Tags: Toshiba
Similar Questions
-
Satellite C650 USB ports does not work
Hello
I have trouble with me laptop C650. USB ports yesterday do not work after you connect USB stick, SD card or some.
Now I don't know if it's a hardware or software error.
I tried to restore the system, change the USB drivers, perform the maintenance of PC and check the antivirus, but nothing did not work.Laptop computer ads?
Thank´s for more info...
Hello
You can try to refresh the USB ports and the controllers that appear in Device Manager.
Disconnect all USB devices and go to Device Manager.
Here, expand USB area controllers.
Now delete all USB host controllers and hubs root USB in the list.
After this reboot of the laptop.
Finally, the Windows operating system should start and should recognise all USB devices once again. Now connect a USB mouse and check if you can use it. -
Re: USB Ports do not work on my Satellite L830-145
Hello
I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
Maybe here someone will have an ideaWhen I start the computer power light before windows starts and goes dead when windows starts loading
On USB3 I can recharge the phone, but it won t recognize anything in windows
Any help much appreciated.According to specification for laptop, your laptop comes with Win8 64bits.
Using the original version of Windows preinstalled?All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.
-
Satellite L650 - 12N USB Ports does not work
My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
It shows a yellow exclamation mark on my system.I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
Under the key USB gives error code 43, I do not understand.The webcam and the wireless card no more.
This boot problem after a storm in my area some time ago.Please can someone help.
Thank you
SaniHello
> This problem start after a storm in my area some time ago.
Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems
I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.
But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you
-
USB ports do not work after waking up Satellite A200 from sleep mode
After that I spend my Satellite A200-244 "sleep" or "hibernate" USB ports do not work!
Hi mate,
already tried this:
Open start and type Device Manager and then press ENTER, to start Device Manager. Click on the sign + next to "Controllers of Bus USB" and then in the list, you should see some devices called 'USB hub root'. For each one, click right, hit properties, go to the power management tab and uncheck the box "Allow the computer to turn off this device to save power." Then restart.
Maybe it works. Another solution would probably be this Microsoft KB document:
http://support.Microsoft.com/?scid=kb%3ben-us%3B812946&x=8&y=9
Greetings
-
Satellite P200 - 17 c: USB ports do not work after BIOS update
Hello
Just updated my BIOS for my Satellite P200 - 17 c to version 1.80, running Vista Home.
Now my USb ports do not work according to the normal when I insert flash drive microdrive or my Creative Zen MP3 player. (crash explore and not entirely file transfer)
I just wanted to know if it is a known problem or is the problem unrelated to the update of the BIOS.
Any info or advice would be great.
See you soon.
Glad you ve found a solution and thank you for sharing this with us
-
Satellite A10 s203: USB ports does not work
Hello! All of a sudden my usb ports do not work on my satellite sa10-s203. Tried everything (even restarted the ashes of l-top nothing happened.) Enybody can help me? Kris...
Hello
If the USB ports are properly recognized in device then as Quad Manager said it could be an external problem. The USB port is 500mA power. If the external device requires more power to work in this case, it of necessary to use the external power supply.
Good bye
-
Satellite L40 - 18W - USB ports does not work after format HARD drive
I formatted my laptop "L40 - 18w" after that all usb ports do not work.
Could you please help me on this issue
Thank you
Ben is right. After the installation of the operating system as a first step, you need to install driver chipset.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com
There you can find all the drivers for your model of laptop including driver chipset. -
Satellite A110-260 - USB ports do not work
Hey!
I have a Satilite A110-260 of my brother.
The problem is that the USB Ports do not work :-(They go into the hardware Manager, but I can't install it.
I have download the hardware installation of the Toshiba homepage but... :-(Can you help me?
Sincerely of John
PS Sorry for my English ^^
Can you please tell us what OS are you trying to install?
SP1 or SP2?Please after the installation of the OS, the first thing you need is install driver Chipset.
Did you install the right one? -
I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please
Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.
-
NB200-12N - USB port does not work
Hello
I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
But does not work.Thank you
Paulo
If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.
Try reinstalling the chipset utility.
By the way: two other ports work well, right?
-
El Capitan USB port does not worked well under Yosemite.
Running a VMWARE image of the Linux kernel using a Sentinel of SafeNet USB license dongle canned.
Has worked perfectly under Yosemite unfortunately too long to go back.The USB port does not work with other USB devices?
I suspect an incompatibility with the EC and the sine of dongle USB EL strengthened using third kexts. They must be signed, and so a softer update for the dongle is probably necessary.
http://arstechnica.co.UK/Apple/2015/09/OS-x-10-11-El-Capitan-the-Ars-Technica-re view/8 / #h1
-
xw6400 workstation: USB ports do not work
Non of my USB ports work. I tired everthing but always without success. In the end, I removed microsoft 8 and installed a new, but still my USB ports do not work. Motherboard is HP E93839
Anyone know how to repair or fix this problem please?
Concerning
Thank you, Mohammed, but I already did everything on the Microsoft Web site. The problem is the motherboard no software issue. I plugged in the motherboard main power power off and waited 5 min the reconnected and it started working.
-
X 51 - R2. Before USB ports do not work
I just got my new Alienware X 51 R2 recently. I begin to test on my new computer. Then I found at the front, two USB ports do not work! My USB device is functional because it works when I connect it to the rear USB ports. I don't know what problem is it? I tried to update and install the driver too much on Dell.com. It's a new pc and therefore disadvantage if the front USB ports do not work. Help, please
Just for someone else who has this problem. It's actually all because the cable that connects the USB card to the front of the motherbard is connected with a black cable. You will probably find that opening upwards, you will find that the thick black cable is not connected.
Once reconnected, you will have your USB market back again. You will also find that your AlienFX works. I just had this problem and after the challenging my brain trying different drivers, reinstalling the operating system, make drains of power without meaning, try all USB, I, I thought I would check the actual cable and voila. Hope it helps others in the future.
-
My USB ports do not work.
Hello
Yesterday, I bought a brand new printer, implemented, it was working fine, and then it just stopped. So I fought a bit with her, decided the printer was defective and would resume and put it out to a new, and meanwhile put my printing task on my jump drive and bring it to our local printing store. However, when I put my jumpdrive into the USB port to transfer the project, my computer would not my USB - stick. So now, I think that for some reason that my USB ports are not working. Why is this happening and how to fix it?Hello
1 reboot to be sure nothing blocks the ports.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - Device Manager - click in the box of white/white - VIEW - show hidden devices
Look everywhere EXCEPT USB controllers for your device and if find you them (maybe
plus_d' one of each) under disk drives, you can have several - right CLICK and UNINSTALL
for all instancesControl Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
A few days ago, I posted a question about migration backup emails in TB. I got help, but not a definitive answer to my problems. Unfortunately, my wife and I seem to have created an additional problem which must be resolved before we return to the is
-
I have problems with the W510 gel randomly with openSUSE 11.3. I checked ThinkWiki http://www.thinkwiki.org/wiki/Category:W510 and the problem is not here or on other forums. Does anyone else have this problem? Is there any distro that works correctl
-
I can't add applications to the watch. Does not appear in the Apple Watch app either.
I tried to add apps to my watch, but they may not appear. They have downloaded successfully on my iPhone but do not appear in my Apple Watch app or on my Apple Watch. I tried to restart my iPhone and my watch and not matched and combined but still no
-
Do you guys do anything better? WHY have I not talking to you twice about my problem? I HAVE A DELL V305 PRINTER. IN THE CONTROL PANEL, IT SAYS THAT I HAVE A PRINTER. IN THE "ALL PROGRAMS", HE SAID THAT HE DIDN'T THERE HAS NO PRINTER. WHY?
-
Just a lot of things at buy.com for a renovated c250 - but it came without a manual or software. I went to the download page just now, and Sansa Media Converter 4.236 is supposed to be what I need, but when I click on download now it says file not fo